STP16CP596
Low voltage 16-Bit, constant current LED sink driver
Features
■
Low voltage power supply down to 3V
■
16 constant current output channels
■
Adjustable output current through external
resistor
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
Description
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s codes
b
Order
O
■
Serial data IN/parallel data OUT
■
Serial OUT changes state on the falling edges
of clock
■
3.3V micro driver-able
■
Output current: 3-50 mA
■
25MHz clock frequency
■
Available in high thermal efficiency TSSOP
exposed pad
The STP16CP596 is a monolithic, low voltage,
low current power 16-bit shift register designed for
LED panel displays. The STP16CP596 contains a
16-bit serial-IN, parallel-OUT shift register that
feeds a 16-bit, D-type storage register. In the
output stage, sixteen regulated current sources
were designed to provide 3-50mA constant
current to drive the LEDs.
Compared with the STPIC6C595, the device
provides great flexibility and improved
performance in LED panel system design.
DIP-24
SO-24
TSSOP24
TSSOP24
(exposed pad)
Users can adjust the STP16CP596 output current
with an external resistor, controlling the LEDs'
light intensity.
The STP16CP596 guarantees a 16V output
driving capability, allowing users to connect more
LEDs in series. The high clock frequency (25MHz)
also satisfies the high volume data transmission
system requirement. The 3.3V voltage supply is
useful for applications that interface any
microprocessor from 3.3V.
Compared with a standard TSSOP package, the
TSSOP exposed pad increases heat dissipation
capability by a factor of 2:5.
Part number
Package
Packaging
STP16CP596B1R
DIP-24
15 parts per tube
STP16CP596M
SO-24 (Tube)
40 parts per tube
STP16CP596MTR
SO-24 (Tape & Reel)
1000 parts per reel
STP16CP596TTR
TSSOP24 (Tape & Reel)
2500 parts per reel
STP16CP596XTTR
TSSOP24 Exposed-Pad (Tape & Reel)
2500 parts per reel
May 2006
Rev 4
1/26
www.st.com
26
STP16CP596
Contents
1
Summary description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1
2
Pin connection and description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Equivalent circuit of inputs and outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1
Truth table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.2
Timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
3
Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4
Maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1
Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.2
Recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6
Switching characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8
Typical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
10
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2/26
STP16CP596
1
1 Summary description
Summary description
Table 1.
Current accuracy
Current accuracy
Output Voltage
Between ICs
Output Current
Between bits
≥ 0.1V
3mA/VCC = 5V
± 3%
± 6%
≥ 0.15V
5mA/VCC = 5V
± 2%
± 6%
≥ 0.25V
10mA/VCC = 5V
± 2%
± 6%
≥ 0.5V
20mA/VCC = 5V
± 1%
± 6%
≥ 1.2V
40mA/VCC = 5V
± 1%
± 6%
≥ 1.4V
50mA/VCC = 5V
± 1%
± 6%
)
s
(
t
c
u
d
o
)
r
s
(
P
t
1.1
Pin connection and description
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
Figure 1.
Note:
Connections diagram
The Exposed-Pad is electrically not connected
3/26
STP16CP596
1 Summary description
Table 2.
Pin description
PIN N°
Symbol
Name and function
1
GND
Ground Terminal
2
SDI
Serial data input terminal
3
CLK
Clock input terminal
4
LE
Latch input terminal
5-20
OUT 0-15
21
OE
22
SDO
23
R-EXT
24
VDD
Output terminal
Input terminal of output enable (active low)
Serial data out terminal
Input terminal of an external resistor for constant current programing
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
4/26
Supply voltage terminal
STP16CP596
2
2 Equivalent circuit of inputs and outputs
Equivalent circuit of inputs and outputs
Figure 2.
OE Terminal
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
Figure 3.
LE Terminal
5/26
2 Equivalent circuit of inputs and outputs
Figure 4.
STP16CP596
CLK, SDI Terminal
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
Figure 5.
6/26
SDO Terminal
STP16CP596
Figure 6.
2 Equivalent circuit of inputs and outputs
Block diagram - normal mode
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
2.1
Truth table
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
Table 3.
Clock
Note:
Truth table
LE
OE
SERIAL-IN OUT0 .................. OUT7 .................. OUT15
SDO
H
L
Dn
Dn ..... Dn -7 ..... Dn -15
Dn -15
L
L
Dn + 1
No Change
Dn -14
H
L
Dn + 2
Dn -2 ..... Dn -5 ..... Dn -13
Dn -13
X
L
Dn + 3
Dn -2 ..... Dn -5 ..... Dn -13
Dn -13
X
L
Dn + 3
ON
Dn -13
OUT0 to OUT15 = ON when Dn = H; OUT0 to OUT15 = OFF when Dn = L.
7/26
2 Equivalent circuit of inputs and outputs
2.2
STP16CP596
Timing diagram
Figure 7.
Timing diagram - normal mode
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
Note:
Note: The latches circuit holds data when the LE terminal is Low.
When the LE terminal is at High level, latch circuit doesn’t hold the data it passes from the input
to the output.
When the OE terminal is at Low level, output terminals OUT0 to OUT15 respond to the data,
either ON or OFF.
When the OE terminal is at High level, it switches off all the data on the output terminal.
8/26
STP16CP596
3
3 Waveforms
Waveforms
Figure 8.
Clock, Serial-IN, Serial-OUT
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
Figure 9.
Clock, Serial-In, Latch, Enable, Outputs
9/26
3 Waveforms
STP16CP596
Figure 10. Outputs
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
10/26
STP16CP596
4
4 Maximum rating
Maximum rating
Stressing the device above the rating listed in the “Absolute Maximum Ratings” table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the Operating sections of this
specification is not implied. Exposure to Absolute Maximum Rating conditions for extended
periods may affect device reliability. Refer also to the STMicroelectronics SURE Program and
other relevant quality documents.
Table 4.
Absolute maximum ratings
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
4.1
Thermal data
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
Symbol
Parameter
Value
Unit
VDD
Supply Voltage
0 to 7
V
VO
Output Voltage
-0.5 to 16
V
IO
Output Current
50
mA
VI
Input Voltage
-0.4 to VDD+0.4
V
IGND
GND Terminal Current
800
mA
fCLK
Clock Frequency
25
MHz
TOPR
Operating Temperature Range
-40 to +125
°C
TSTG
Storage Temperature Range
-65 to +150
°C
Table 5.
Symbol
RthJA
Thermal data
Parameter
Thermal Resistance Junctionambient
DIP-24
SO-24
TSSOP-24
TSSOP-24(1)
(exposed pad)
Unit
60
75
85
37.5
°C/W
1. The Exposed-Pad should be soldered to the PBC to realize the thermal benefits
11/26
STP16CP596
4 Maximum rating
4.2
Recommended operating conditions
Table 6.
Symbol
Recommended operating conditions
Parameter
Test conditions
Min.
Typ.
5.5
V
16.0
V
50
mA
Supply Voltage
VO
Output Voltage
IO
Output Current
OUTn
IOH
Output Current
Serial OUT
+1
mA
IOL
Output Current
Serial OUT
-1
mA
VIH
Input Voltage
0.7VDD
VDD+0.3
V
VIL
Input Voltage
-0.3
3.0
3
twLAT
LE Pulse Width
20
twCLK
CLK Pulse Width
20
twEN
OE Pulse Width
uc
0.3VDD
od
Pr
400
)
s
(
t
VDD = 3.3V
tHOLD(D) Hold Time for DATA
tREM(L)
Removal Time for
LATCH
fCLK
Clock Frequency
20
15
ns
)
s
t(
uc
15
Cascade Operation(1)
V
ns
e
t
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
12/26
Unit
VDD
tSETUP(D) Setup Time for DATA
1.
Max.
ns
ns
ns
ns
25
If the device is connected in cascade, it may not be possible achieve the maximum data transfer. Please
considered the timings carefully.
MHz
STP16CP596
5
5 Electrical characteristics
Electrical characteristics
Table 7.
Electrical characteristics (VDD = 3.3V to 5V, T = 25°C, unless otherwise
specified.)
Symbol
Parameter
Test conditions
Unit
0.7VDD
VDD
V
VIL
Input Voltage Low Level
GND
0.3VDD
V
IOH
Output Leakage Current
10
µA
VOL
Output Voltage (Serial OUT) IOL = 1mA
V
VOH
Output Voltage (Serial OUT) IOH = -1mA
(s)
Output Current
∆IOL1A
∆IOL2A
Output Current Error
between bit (All Outputs
ON)
IOL1B
IOL2B
t
c
u
∆IOL1B
e
t
e
ol
∆IOL2B
od
Pr
(t s)
Output Current Error
between bit (All Output ON)
o
r
P
e
RSIN(up)
c
u
d
VOH = 16 V
0.4
u
d
o
2.85
3
VO = ≥0.5V, REXT = 1KΩ,
VDD = 3.3V
19.6
20
r
P
e
t
e
l
o
VO = ≥0.2V, REXT = 6.2KΩ,
VDD = 3.3V
s
b
O
mA
20.4
mA
±4
±6
%
±2
±3
%
uc
2.9
3
3.1
mA
VO = ≥0.5V, REXT = 1KΩ,
VDD = 5V
19.6
20
20.4
mA
VO = ≥0.2V, REXT = 6.2KΩ,
VDD = 5V
±2
± 3.5
%
VO = ≥0.5V, REXT = 1KΩ,
VDD = 5V
±1
±2
%
150
300
600
KΩ
100
200
400
KΩ
so
b
O
-
REXT = OPEN
OUT 0 to 15 = OFF
0.3
REXT = 6.2KΩ
OUT 0 to 15 = OFF
1
IDD(OFF3)
REXT = 1KΩ
OUT 0 to 15 = OFF
3
IDD(ON1)
REXT = 6.2KΩ
OUT 0 to 15 = ON
1
REXT = 1KΩ
OUT 0 to 15 = ON
3
IDD(OFF2)
Supply Current (OFF)
)
s
t(
VO = ≥0.2V, REXT = 6.2KΩ,
VDD = 5V
RSIN(down) Pull-down Resistor
IDD(OFF1)
V
3.15
d
o
r
P
e
let
VO = ≥0.5V, REXT = 1KΩ,
VDD = 3.3V
Pull-up Resistor
t
e
l
o
ct
VDD0.4V
VO = ≥0.2V, REXT = 6.2KΩ,
VDD = 3.3V
)
(s
Output Current
s
b
O
Max.
Input Voltage High Level
IOL2A
O
Typ.
VIH
IOL1A
bs
Min.
mA
Supply Current (ON)
IDD(ON2)
13/26
STP16CP596
6 Switching characteristics
6
Switching characteristics
Table 8.
Switching characteristics (VDD = 3.3V, T = 25°C, unless otherwise specified.)
Symbol
Parameter
tPLH1
Typ.
Max.
Unit
Propagation Delay Time,
CLK-OUTn, LE = H, OE = L
250
280
ns
tPLH2
Propagation Delay Time,
LE-OUTn, OE = L
220
250
ns
tPLH3
Propagation Delay Time,
OE-OUTn, LE = H
200
250
tPLH
Propagation Delay Time,
CLK-SDO
tPHL1
Test conditions
VDD = 3.3V
VIH = VDD
VIL = GND
CL = 13pF
IO = 40mA
Propagation Delay Time,
CLK-OUTn, LE = H, OE = L REXT = 470 Ω
tPHL2
Propagation Delay Time,
LE-OUTn, OE = L
tPHL3
Propagation Delay Time,
OE-OUTn, LE = H
tPHL
Propagation Delay Time,
CLK-SDO
tON
Output Rise Time
tOFF
Output Fall Time
)-
r
P
e
t
le
10 ~ 90% of voltage waveform
so
90 ~ 10% of voltage waveform
b
O
-
t
c
u
d
o
r
P
e
s
b
O
(s)
25
VL = 3 V
RL = 65 Ω
t
e
l
o
s
(
t
c
du
Min.
50
25
ns
ns
)
s
t(
50
ns
50
ns
50
70
ns
25
50
ns
260
400
ns
50
80
ns
uc
25
od
Note: 1 To prevent current overshoot, during the Outputs switching, the overhead output voltage must
be less than 1V.
o
r
P
)
s
(
ct
2 The Maximum suggested swithching frequency is up tp 10KHz.
e
t
e
ol
s
b
O
s
b
O
t
e
l
o
14/26
r
P
e
u
d
o
STP16CP596
7
7 Test circuit
Test circuit
Figure 11. DC Characteristics
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
Figure 12. AC Characteristics
15/26
8 Typical characteristics
8
STP16CP596
Typical characteristics
Figure 13. Output current-REXT resistor
Figure 14. Power dissipation vs. temperature
package
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
Figure 15. Output current vs. drop voltage
16/26
Figure 16. Output current vs ±∆IOL(%)
STP16CP596
8 Typical characteristics
Figure 17. Blue powerLED application circuit
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
17/26
9 Package mechanical data
9
STP16CP596
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect. The category of
second Level Interconnect is marked on the package and on the inner box label, in compliance
with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also
marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are
available at: www.st.com.
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
18/26
STP16CP596
Table 9.
9 Package mechanical data
Plastic DIP-24 (0.25) Mechanical data
mm
inch
Ref
Min
Typ
A
A1
Max
Min
Typ
4.32
0.38
A2
Max
0.170
0.015
3.3
0.130
B
0.41
0.46
0.51
0.016
0.018
0.020
B1
1.40
1.52
1.65
0.055
0.060
0.065
c
0.20
0.25
0.30
0.008
0.010
0.012
D
31.62
31.75
31.88
1.245
1.250
1.255
E
7.62
8.26
0.300
E1
6.35
6.86
0.250
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
6.60
0.325
0.260
e
2.54
0.100
E1
7.62
0.300
0.270
L
3.18
3.43
0.125
0.135
M
0°
15°
0°
15°
Figure 18. Plastic DIP-24 (0.25) Package dimensions
19/26
STP16CP596
9 Package mechanical data
Table 10.
TSSOP24 Mechanical data
mm
inch
Ref
Min
Typ
A
A1
Max
Min
Typ
1.1
0.05
A2
0.15
Max
0.043
0.002
0.9
0.006
0.035
b
0.19
0.30
0.0075
0.0118
c
0.09
0.20
0.0035
0.0079
D
7.7
7.9
0.303
0.311
E
4.3
4.5
0.169
0.177
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
e
0.65 BSC
H
6.25
6.5
0.246
0.256
K
0°
8°
0°
8°
L
0.50
0.70
0.020
0.028
Figure 19. TSSOP24 Package dimensions
20/26
0.0256 BSC
STP16CP596
Table 11.
9 Package mechanical data
Tape & Reel TSSOP24
mm
inch
Ref
Min
A
Typ
Max
Min
330
Max
12.992
C
12.8
D
20.2
0.795
N
60
2.362
T
13.2
Typ
0.504
22.4
0.519
0.882
Ao
6.8
7
0.268
0.276
Bo
8.2
8.4
0.323
0.331
Ko
1.7
1.9
0.067
0.075
Po
3.9
4.1
0.153
0.161
P
11.9
12.1
0.468
0.476
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
Figure 20. Reel dimensions
21/26
STP16CP596
9 Package mechanical data
Table 12.
SO-24 Mechanical data
mm
inch
Ref
Min
Typ
A
a1
Max
Min
Typ
2.65
0.1
0.104
0.2
a2
Max
0.004
0.008
2.45
0.096
b
0.35
0.49
0.014
0.019
b1
0.23
0.32
0.009
0.012
C
0.5
0.020
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
c1
45°(typ.)
D
15.20
15.60
0.598
0.614
E
10.00
10.65
0.393
0.419
e
1.27
0.050
e3
13.97
0.550
F
7.40
7.60
0.291
0.300
L
0.50
1.27
0.020
0.050
S
Figure 21. SO-24 Package dimensions
22/26
°(max.) 8
STP16CP596
Table 13.
9 Package mechanical data
Tape & Reel SO-24
mm
inch
Ref
Min
A
Typ
Max
Min
330
Max
12.992
C
12.8
D
20.2
0.795
N
60
2.362
T
13.2
Typ
0.504
30.4
0.519
1.197
Ao
10.8
11.0
0.425
0.433
Bo
15.7
15.9
0.618
0.626
Ko
2.9
3.1
0.114
0.122
Po
3.9
4.1
0.153
0.161
P
11.9
12.1
0.468
0.476
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
Figure 22. Reel dimensions
23/26
STP16CP596
9 Package mechanical data
Table 14.
TSSOP24 Exposed-pad
mm
inch
Ref
Min
Typ
Max
A
1.2
A1
0.15
A2
0.8
b
1
Min
Typ
Max
0.047
0.004
0.006
0.039
0.041
1.05
0.031
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.0089
D
7.7
7.9
0.303
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
D1
7.8
2.7
0.311
0.106
E
6.2
6.4
6.6
0.244
0.252
0.260
E1
4.3
4.4
4.5
0.169
0.173
0.177
E2
1.5
e
0.65
K
0°
L
0.45
0.60
Figure 23. TSSOP24 dimensions
24/26
0.307
0.059
0.0256
8°
0°
0.75
0.018
8°
0.024
0.030
STP16CP596
10
10 Revision history
Revision history
Table 15.
Revision history
Date
Revision
Change
08-Apr-2005
1
First Release.
02-May-2005
2
Typing Error on the description features.
25-Jul-2005
3
Add note on Fig. 1 and Table 5.
16-May-2006
4
New template, few updates
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
25/26
STP16CP596
10 Revision history
)
s
(
t
c
u
d
o
)
r
s
(
P
t
c
e
t
u
e
d
l
o
o
r
s
P
b
e
O
t
e
l
)
o
s
(
s
t
b
c
u
O
d
o
)
r
s
P
(
t
c
e
t
u
e
l
d
o
o
r
s
P
b
O
e
t
e
l
o
s
b
O
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED,
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS,
NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR
SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
26/26
工商网监
湘ICP备2023018690号
