STPS41L60CR

® STPS41L60CG/CT/CR POWER SCHOTTKY RECTIFIER MAIN PRODUCTS CHARACTERISTICS IF(AV) VRRM Tj (max) VF (max) 2 x 20 A 60 V 150 °C 0.58 V A1 K A2 FEATURES AND BENEFITS NEGLIGIBLE SWITCHING LOSSES LOW FORWARD VOLTAGE DROP LOW THERMAL RESISTANCE AVALANCHE CAPABILITY SPECIFIED s s s s A2 A1 K A1 K A2 I2PAK STPS41L60CR K TO-220AB STPS41L60CT DESCRIPTION Dual center tab Schottky rectifier suited for Switch Mode Power Supply and high frequency DC to DC converters. Packaged in D2PAK, I2PAK and TO-220AB this device is intended for use in low voltage, high frequency inverters, free-wheeling and polarity protection applications. A2 A1 D2PAK STPS41L60CG ABSOLUTE RATINGS (limiting values, per diode) Symbol VRRM IF(RMS) IF(AV) IFSM IRRM PARM Tstg Tj dV/dt Parameter Repetitive peak reverse voltage RMS forward current Average forward current Surge non repetitive forward current Peak repetitive reverse current Repetitive peak avalanche power Storage temperature range Maximum operating junction temperature * Critical rate of rise reverse voltage Tc = 125°C δ = 0.5 Per diode Per device Value 60 30 20 40 220 1 9500 - 65 to + 175 150 10000 A A A W °C °C V/µs Unit V A tp = 10 ms sinusoidal tp = 2 µs square F=1kHz tp = 1µs Tj = 25°C *: dPtot 1 thermal runaway condition for a diode on its own heatsink < dTj Rth( j − a ) 1/6 July 2003 - Ed : 3A STPS41L60CG / STPS41L60CT / STPS41L60CR THERMAL RESISTANCES Symbol Rth(j-c) Rth(c) Junction to case Coupling Parameter Per diode Total Value 1.5 0.8 0.1 Unit °C/W When the diodes 1 and 2 are used simultaneously : ∆ Tj(diode 1) = P(diode1) x Rth(j-c)(Per diode) + P(diode 2) x Rth(c) STATIC ELECTRICAL CHARACTERISTICS (per diode) Symbol IR * Parameter Reverse leakage current Tests Conditions Tj = 25°C Tj = 125°C VF * Forward voltage drop Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Pulse test : * tp = 380 µs, δ < 2% Min. Typ. Max. 240 Unit µA mA V VR = VRRM 77 IF = 20 A IF = 20 A IF = 40 A IF = 40 A 0.67 0.50 130 0.60 0.58 0.77 0.71 To evaluate the conduction losses use the following equation : P = 0.42 x IF(AV) + 0.007 IF2(RMS) Fig. 1: Conduction losses versus average current. PF(av)(W) 16 δ = 0.5 Fig. 2: Average forward current versus ambient temperature (δ = 0.5). IF(av)(A) 22 Rth(j-a)=Rth(j-c) 14 12 10 8 6 4 2 δ = 0.05 δ = 0.1 20 18 δ=1 δ = 0.2 16 14 12 10 8 T 6 4 T Rth(j-a)=50°C/W IF(av)(A) 0 0 5 10 15 δ=tp/T 20 tp 2 0 δ=tp/T tp Tamb(°C) 50 75 100 125 150 25 0 25 2/6 STPS41L60CG / STPS41L60CT / STPS41L60CR Fig. 3: Normalized avalanche power derating versus pulse duration. PARM(tp) PARM(1µs) 1 Fig. 4: Normalized avalanche power derating versus junction temperature. PARM(tp) PARM(25°C) 1.2 1 0.1 0.8 0.6 0.01 0.4 0.2 0.001 0.01 0.1 1 tp(µs) 10 100 1000 Tj(°C) 0 0 25 50 75 100 125 150 Fig. 5: Non repetitive surge peak forward current versus overload duration (maximum values). IM(A) 250 225 200 175 150 125 100 75 50 25 0 1.E-03 1.E-02 1.E-01 1.E+00 Tc=125°C Tc=75°C Tc=25°C Fig. 6: Relative variation of thermal impedance junction to case versus pulse duration. Zth(j-c)/Rth(j-c) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 δ = 0.2 δ = 0.1 δ = 0.5 IM t 0.2 Single pulse T δ=0.5 t(s) 0.1 0.0 1.E-03 1.E-02 tp(s) 1.E-01 δ=tp/T tp 1.E+00 Fig. 7: Reverse leakage current versus reverse voltage applied (typical values). IR(mA) 1.E+03 Tj=150°C Fig. 8: Junction capacitance versus reverse voltage applied (typical values). C(nF) 10.0 F=1MHz Vosc=30mV Tj=25°C 1.E+02 Tj=125°C 1.E+01 Tj=100°C Tj=75°C 1.0 1.E+00 Tj=50°C 1.E-01 Tj=25°C VR(V) 1.E-02 0 5 10 15 20 25 30 35 40 45 50 55 60 0.1 1 VR(V) 10 100 3/6 STPS41L60CG / STPS41L60CT / STPS41L60CR Fig. 9: Forward voltage drop versus forward current. Fig. 10: Thermal resistance junction to ambient versus copper surface under tab (epoxy printed board FR4, Cu = 35µm) (STPS41L60CG only). Rth(j-a)(°C/W) 80 Tj=125°C (Maximum values) IFM(A) 100 70 60 Tj=125°C (Typical values) 50 Tj=25°C (Maximum values) 10 40 30 20 VFM(V) 1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 10 0 0 5 10 15 S(cm²) 20 25 30 35 40 PACKAGE MECHANICAL DATA I2PAK DIMENSIONS REF. A E L2 c2 Millimeters Min. Max. 4.60 2.69 0.93 1.17 1.17 0.60 1.36 9.35 2.70 10.4 13.6 3.78 1.40 4.40 2.49 0.70 1.14 1.14 0.45 1.23 8.95 2.40 10.0 13.1 3.48 1.27 Inches Min. 0.173 0.098 0.028 0.044 0.044 0.018 0.048 0.352 0.094 0.394 0.516 0.137 0.050 Max. 0.181 0.106 0.037 0.046 0.046 0.024 0.054 0.368 0.106 0.409 0.535 0.149 0.055 A A1 b b1 b2 c c2 D L1 b2 L b1 b e A1 D e E L c L1 L2 4/6 STPS41L60CG / STPS41L60CT / STPS41L60CR PACKAGE MECHANICAL DATA D2PAK DIMENSIONS REF. A E L2 C2 Millimeters Min. Max. 4.40 4.60 2.49 2.69 0.03 0.23 0.70 0.93 1.14 1.70 0.45 0.60 1.23 1.36 8.95 9.35 10.00 10.40 4.88 5.28 15.00 15.85 1.27 1.40 1.40 1.75 2.40 3.20 0.40 typ. 0° 8° Inches Min. Max. 0.173 0.181 0.098 0.106 0.001 0.009 0.027 0.037 0.045 0.067 0.017 0.024 0.048 0.054 0.352 0.368 0.393 0.409 0.192 0.208 0.590 0.624 0.050 0.055 0.055 0.069 0.094 0.126 0.016 typ. 0° 8° D L L3 A1 B2 B G A2 C R M * V2 * FLAT ZONE NO LESS THAN 2mm A A1 A2 B B2 C C2 D E G L L2 L3 M R V2 FOOTPRINT (dimensions in mm) 16.90 10.30 1.30 5.08 3.70 8.90 5/6 STPS41L60CG / STPS41L60CT / STPS41L60CR PACKAGE MECHANICAL DATA TO-220AB DIMENSIONS REF. H2 Dia L5 C L7 L6 L2 F2 F1 L9 L4 F G1 G M E D A Millimeters Min. Max. 4.40 4.60 1.23 1.32 2.40 2.72 0.49 0.70 0.61 0.88 1.14 1.70 1.14 1.70 4.95 5.15 2.40 2.70 10 10.40 16.4 typ. 13 14 2.65 2.95 15.25 15.75 6.20 6.60 3.50 3.93 2.6 typ. 3.75 3.85 Inches Min. Max. 0.173 0.181 0.048 0.051 0.094 0.107 0.019 0.027 0.024 0.034 0.044 0.066 0.044 0.066 0.194 0.202 0.094 0.106 0.393 0.409 0.645 typ. 0.511 0.551 0.104 0.116 0.600 0.620 0.244 0.259 0.137 0.154 0.102 typ. 0.147 0.151 A C D E F F1 F2 G G1 H2 L2 L4 L5 L6 L7 L9 M Diam. Ordering type STPS41L60CG STPS41L60CG-TR STPS41L60CT STPS41L60CR s Marking STPS41L60CG STPS41L60CG STPS41L60CT STPS41L60CR Package D PAK D PAK TO-220AB I PAK 2 2 2 Weight 1.48 g 1.48 g 2.20 g 1.49 g Base qty 50 1000 50 50 Delivery mode Tube Tape & reel Tube Tube EPOXY MEETS UL94,V0 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics © 2003 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 6/6