STTH12S06FP

STTH12S06 Turbo 2 ultrafast high voltage rectifier Table 1. Main product characteristics IF(AV) VRRM IRM (typ.) Tj (max) VF (typ) trr (typ) 12 A 600 V 6A 175 °C 1.5 V 14 ns A K TO-220FPAC STTH12S06FP Features and benefits ■ ■ ■ ■ ■ ■ Ultrafast recovery Low reverse recovery current Reduces losses in diode and switching transistor Low thermal resistance Higher frequency operation Insulated voltage: 1500 VRMS Description ST's STTH12S06 is a state of the art Ultrafast recovery diode. By the use of 600 V Pt doping Planar technology, this diode will outperform the power factor correction circuits operating in hardswitching conditions. The extremely low reverse recovery current of the STTH12S06, reduces significantly the switching power losses of the MOSFET, and thus increases the Table 2. Symbol VRRM IF(AV) IFSM Tstg Tj Repetitive peak reverse voltage Average forward current Surge non repetitive forward current Storage temperature range Maximum operating junction temperature tp = 10 ms sinusoidal efficiency of the application. This allows designers to reduce the size of their heatsinks. This device is also intended for applications in power supplies and power conversions systems, and other power switching applications. Absolute ratings (limiting values at 125 °C, unless otherwise stated) Parameter Value 600 12 100 - 65 + 175 175 Unit V A A °C °C October 2007 Rev 1 1/6 www.st.com 6 Characteristics STTH12S06 1 Characteristics Table 3. Symbol Rth (j-c) Junction to case Thermal resistances Parameter Value 4.6 Unit °C/W Table 4. Symbol IR Static electrical characteristics Parameter Reverse leakage current Tests conditions VR = 600 V Tj = 25 °C Tj = 125 °C Tj = 25 °C Tj = 150 °C 1.5 35 Min. Typ. Max. 30 µA 400 3.4 V 1.9 Unit VF Forward voltage drop IF = 12 A Table 5. Symbol trr IRM S factor Qrr Dynamic electrical characteristics Tests conditions IF = 1 A dIF/dt = - 200 A/µs VR = 400 V IF = 12A dIF/dt = - 200 A/µs VR = 200 V IF = 12A dIF/dt = - 200 A/µs Tj = 125 °C VR = 30 V Min. Typ. 14 6.0 0.3 160 nC Max. 21 8.0 Unit ns A Figure 1. P(W) 34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 0 2 Conduction losses versus average current δ=0.05 Figure 2. IFM(A) Forward voltage drop versus forward current 100 δ=0.1 δ=0.2 δ=0.5 δ=1 90 80 70 60 50 40 30 Tj=150°C (Typical values) Tj=150°C (Maximum values) Tj=25°C (Maximum values) T 20 tp IF(AV)(A) 4 6 8 10 δ=tp/T 12 14 10 0 16 VFM(V) 0 1 2 3 4 5 6 7 2/6 STTH12S06 Characteristics Figure 3. Relative variation of thermal impedance, junction to case, versus pulse duration Figure 4. Peak reverse recovery current versus dIF/dt (typical values) Zth(j-c)/Rth(j-c) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 1.E-03 tp(s) 1.E-02 1.E-01 1.E+00 1.E+01 Single pulse 12 11 10 9 8 7 6 5 4 3 2 1 0 IRM(A) IF = 12 A VR=400V Tj=125°C Tj=25°C dIF/dt(A/µs) 10 100 1000 Figure 5. tRR(ns) Reverse recovery time versus dIF/dt (typical values) IF = 12 A VR=400V Figure 6. QRR(nC) IF = 12 A VR=400V Reverse recovery charges versus dIF/dt (typical values) 120 260 240 220 200 180 160 100 80 Tj=125°C 60 Tj=125°C 140 120 100 80 60 40 dIF/dt(A/µs) Tj=25°C 40 Tj=25°C 20 20 0 400 450 500 550 600 dIF/dt(A/µs) 10 100 1000 0 0 50 100 150 200 250 300 350 Figure 7. Junction capacitance versus reverse voltage applied (typical values) F=1MHz Vosc=30mVRMS Tj=25°C C(pF) 100 VR(V) 10 1 10 100 1000 3/6 Package information STTH12S06 2 Package information ● ● ● ● Epoxy meets UL94, V0 Cooling method: by conduction (C) Recommended torque value: 0.55 Nm Maximum torque value: 0.7 Nm In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. Table 6. TO-220FPAC dimensions Dimensions Ref. Millimeters Min. A A H B Inches Min. 0.173 0.098 0.098 0.018 0.030 0.045 0.195 0.094 0.393 Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.205 0.106 0.409 Max. 4.6 2.7 2.75 0.70 1 1.70 5.20 2.7 10.4 4.4 2.5 2.5 0.45 0.75 1.15 4.95 2.4 10 B D E Dia F L6 L2 L3 L5 F1 L4 D L7 F1 G G1 H L2 L3 16 Typ. 28.6 9.8 2.9 15.9 9.00 3.00 30.6 10.6 3.6 16.4 9.30 3.20 0.63 Typ. 1.126 0.386 0.114 0.626 0.354 0.118 1.205 0.417 0.142 0.646 0.366 0.126 F G1 G E L4 L5 L6 L7 Dia. 4/6 STTH12S06 Ordering information 3 Ordering information Table 7. Ordering information Marking STTH12S06FP Package TO-220FPAC Weight 1.64 Base qty 50 Delivery mode Tube Part number STTH12S06FP 4 Revision history Table 8. Date 02-Oct-2007 Revision history Revision 1 Initial release. Changes 5/6 STTH12S06 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 6/6