STTH60L06TV

STTH60L06TV Turbo 2 ultrafast high voltage rectifier Main product characteristics IF(AV) VRRM Tj VF (typ) trr (typ) 2 x 40 A 600 V 150° C 1.30 V 50 ns A1 K1 A1 K2 A2 K2 STTH60L06TV1 K1 A2 STTH60L06TV2 A1 K2 K1 Features and benefits ■ ■ ■ ■ ■ A1 K1 A2 K2 Ultrafast switching Low reverse current Low thermal resistance Reduces switching & conduction losses Insulated package: Electrical insulation = 2500 VRMS Capacitance = 45 pF A2 ISOTOP Description The STTH60L06TV, which is using ST Turbo 2 600V technology, is specially suited for use in switching power supplies, and industrial applications (such as welding), as rectification diode. Table 1. Symbol VRRM IF(RMS) IF(AV) IFSM Tstg Tj Repetitive peak reverse voltage RMS forward current Average forward current, δ = 0.5 Surge non repetitive forward current Storage temperature range Maximum operating junction temperature Order codes Part Number STTH60L06TV1 STTH60L06TV2 Marking STTH60L06TV1 STTH60L06TV2 Absolute ratings (limiting values per diode at 25° C, unless otherwise specified) Parameter Value 600 100 Tc = 75° C per diode Tc = 70° C per diode tp = 10 ms Sinusoidal 30 40 210 -55 to + 150 150 A °C °C Unit V A A October 2006 Rev 3 1/7 www.st.com Characteristics STTH60L06TV 1 Table 2. Characteristics Thermal parameters Symbol Rth(j-c) Rth(c) Parameter Per diode Junction to case Total Coupling thermal resistance 0.85 0.1 °C/W Value 1.60 Unit When the diodes are used simultaneously: ∆Tj(diode1) = P(diode1) x Rth(j-c) (per diode) + P(diode2) x Rth(c) Table 3. Symbol IR(1) VF(2) Static electrical characteristics (per diode) Parameter Reverse leakage current Test conditions Tj = 25° C Tj = 125° C Forward voltage drop Tj = 25° C Tj = 150° C VR = VRRM Min. Typ Max. 25 µA 25 250 1.55 IF = 60 A V 1.0 1.25 Unit 1. Pulse test: tp = 5 ms, δ < 2 % 2. Pulse test: tp = 380 µs, δ < 2 % To evaluate the conduction losses use the following equation: P = 0.95 x IF(AV) + 0.010 IF2(RMS) Table 4. Symbol Dynamic characteristics (per diode) Parameter Test conditions IF = 0.5 A, Irr = 0.25 A IR = 1 A, Tj = 25° C IF = 1 A, dIF/dt = 50 A/µs, VR = 30 V, Tj = 25° C Reverse recovery current Forward recovery time Forward recovery voltage IF = 30 A, dIF/dt = 100 A/µs, VR = 400 V, Tj = 125° C IF = 30 A dIF/dt = 100 A/µs VFR = 1.1 x VFmax, Tj = 25° C IF = 30 A, dIF/dt = 100 A/µs, VFR = 1.1 x VFmax, Tj = 25° C 2.5 65 11.5 Min. Typ Max. 65 ns 90 16 500 A ns V Unit trr Reverse recovery time IRM tfr VFP 2/7 STTH60L06TV Characteristics Figure 1. P(W) 80 Conduction losses versus average current (per diode) δ = 0.1 Figure 2. IFM(A) 100 Forward voltage drop versus forward current (per diode) 70 60 50 40 30 20 10 δ = 0.2 δ = 0.5 90 80 70 Tj=150°C (maximum values) δ = 0.05 δ=1 60 50 40 Tj=150°C (typical values) Tj=25°C (maximum values) T 30 20 IF(AV)(A) 0 0 10 20 30 δ=tp/T 40 tp 50 10 0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 VFM(V) 1.4 1.6 1.8 2.0 2.2 Figure 3. Relative variation of thermal impedance junction to case versus pulse duration Figure 4. Peak reverse recovery current versus dIF/dt (typical values, per diode) Zth(j-c)/Rth(j-c) 1.0 0.9 0.8 0.7 0.6 25 0.5 20 0.4 0.3 15 45 40 35 30 IRM(A) VR=400V Tj=125°C IF=2 x IF(AV) IF=IF(AV) IF=0.5 x IF(AV) T 0.2 0.1 Single pulse 10 5 tp(s) 1.E-02 1.E-01 0.0 1.E-03 δ=tp/T 1.E+00 tp 0 1.E+01 0 50 100 150 dIF/dt(A/µs) 200 250 300 350 400 450 500 Figure 5. trr(ns) 800 700 600 Reverse recovery time versus dIF/dt (typical values, per diode) VR=400V Tj=125°C Figure 6. Qrr(nC) 3500 VR=400V Tj=125°C Reverse recovery charges versus dIF/dt (typical values, per diode) 3000 IF=2 x IF(AV) IF=2 x IF(AV) 2500 2000 IF=IF(AV) 500 400 300 200 100 1000 500 IF=IF(AV) IF=0.5 x IF(AV) 1500 IF=0.5 x IF(AV) dIF/dt(A/µs) 0 0 50 100 150 200 250 300 350 400 450 500 0 0 100 dIF/dt(A/µs) 200 300 400 500 3/7 Characteristics STTH60L06TV Figure 7. Reverse recovery softness factor versus dIF/dt (typical values, per diode) Figure 8. Relative variations of dynamic parameters versus junction temperature S factor 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.2 IF< 2 x IF(AV) VR=400V Tj=125°C 1.4 S factor 1.2 1.0 0.8 QRR 0.6 trr 0.4 IRM IF=IF(AV) VR=400V Reference: Tj=125°C Tj(°C) dIF/dt(A/µs) 0.0 25 0 50 100 150 200 250 300 350 400 450 500 50 75 100 125 0.0 Figure 9. Transient peak forward voltage versus dIF/dt (typical values, per diode) Figure 10. Forward recovery time versus dIF/dt (typical values, per diode) tfr(ns) 450 400 350 300 250 200 IF=IF(AV) VFR=1.1 x VF max. Tj=125°C VFP(V) 10 9 8 7 6 5 4 3 2 1 0 0 50 100 150 IF=IF(AV) Tj=125°C 150 100 50 dIF/dt(A/µs) 200 250 300 350 400 450 500 dIF/dt(A/µs) 0 0 100 200 300 400 500 Figure 11. Junction capacitance versus reverse voltage applied (typical values, per diode) C(pF) 1000 F=1MHz VOSC=30mVRMS Tj=25°C 100 VR(V) 10 1 10 100 1000 4/7 STTH60L06TV Package mechanical data 2 Package mechanical data Epoxy meets UL94, V0 Cooling method: by conduction (C) Table 5. ISOTOP dimensions DIMENSIONS REF. Millimeters Min. A A1 B C C2 D D1 E E1 E2 G G1 G2 F F1 P P1 S 11.80 8.90 7.8 0.75 1.95 37.80 31.50 25.15 23.85 Max 12.20 9.10 8.20 0.85 2.05 38.20 31.70 25.50 24.15 Inches Min. 0.465 0.350 0.307 0.030 0.077 1.488 1.240 0.990 0.939 Max. 0.480 0.358 0.323 0.033 0.081 1.504 1.248 1.004 0.951 24.80 typ. 14.90 12.60 3.50 4.10 4.60 4.00 4.00 30.10 15.10 12.80 4.30 4.30 5.00 4.30 4.40 30.30 0.976 typ. 0.587 0.496 0.138 0.161 0.181 0.157 0.157 1.185 0.594 0.504 0.169 0.169 0.197 0.69 0.173 1.193 In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. 5/7 Ordering information STTH60L06TV 3 Ordering information Part Number STTH60L06TV1 STTH60L06TV2 Marking STTH60L06TV1 STTH60L06TV2 Package ISOTOP ISOTOP Weight Base qty Delivery mode Tube Tube 27 g 10 (without screws) (with screws) 27 g 10 (without screws) (with screws) 4 Revision history Date 07-Sep-2004 10-Sep-2004 13-Oct-2006 Revision 1 2 3 First issue Average forward current (page 1) and Junction to case (page 2) values changed Reformatted to current standard. Added part number STTH60L06TV2. Description of Changes 6/7 STTH60L06TV Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 7/7