TS952IYPT

TS951-TS952-TS954 Input/output rail-to-rail low power operational amplifier Features ■ ■ ■ ■ ■ ■ ■ ■ Rail-to-rail input common-mode voltage range Rail-to-rail output voltage swing Operating from 2.7V to 12V High-speed (3MHz, 1V/µs) Low consumption (0.9mA @ 3V) Supply voltage rejection ratio: 80dB Latch-up immunity Available in SOT23-5 micropackage Output VDD 1 TS951ILT 5 V CC 2 Non-inverting input 3 4 Inverting input TS951ID Applications ■ ■ ■ ■ ■ ■ ■ ■ Set-top boxes Laptop/notebook computers Transformer/line drivers Personal entertainment (CD players) Portable communications (cell phones, pagers) Instrumentation & sensoring Digital-to-analog converter buffers Portable headphone speaker drivers TS952IN-TS952ID-TS952IPT Output 1 Inverting Input 1 Non-inverting Input 1 VDD 1 2 3 4 + + 8 VCC 7 Output 2 6 Inverting Input 2 5 Non-inverting Input 2 Description The TS95x family are rail-to-rail BiCMOS operational amplifiers optimized and fully specified for 3V and 5V operation. The TS951 is housed in the space-saving 5-pin SOT23 package that makes it well suited for battery-powered systems. This micropackage simplifies the PC board design because of its ability to be placed in tight spaces (outside dimensions are: 2.8mm x 2.9mm). TS954IN-TS954ID-TS954IPT Output 1 1 Inverting Input 1 2 Non-inverting Input 1 3 VCC 4 Non-inverting Input 2 5 Inverting Input 2 6 Output 2 7 + + + + 14 Output 4 13 Inverting Input 4 12 Non-inverting Input 4 11 VDD 10 Non-inverting Input 3 9 8 Inverting Input 3 Output 3 December 2007 Rev 6 1/17 www.st.com 17 Absolute maximum ratings and operating conditions TS951-TS952-TS954 1 Absolute maximum ratings and operating conditions Table 1. Symbol VCC Vid Vin Tstg Tj Absolute maximum ratings (AMR) Parameter Supply voltage (1) Differential input voltage (2) Input voltage (3) Storage temperature range Maximum junction temperature Thermal resistance junction to ambient (4) SOT23-5 SO-8 SO-14 TSSOP8 TSSOP14 Thermal resistance junction to case (4) SOT23-5 SO-8 SO-14 TSSOP8 TSSOP14 HBM: human body model(5) TS951 TS952 TS954 Value 14 ±1 VDD-0.3 to VCC+0.3 -65 to +150 150 °C Unit V V V Rthja 250 125 103 120 100 °C/W Rthjc 81 40 31 37 32 °C/W 1 2 3 100 kV ESD MM: machine model(6) CDM: charged device model(7) TS951 TS952 TS954 Latch-up immunity Lead temperature (soldering, 10sec) V 1.5 1.5 1 200 260 kV mA °C 1. All voltage values, except differential voltage are with respect to network ground terminal. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. If Vid > ±1V, the maximum input current must not exceed ±1mA. In this case (Vid > ±1V), an input series resistor must be added to limit input current. 3. Do not exceed 14V. 4. Short-circuits can cause excessive heating and destructive dissipation. Rth are typical values. 5. Human body model: A 100pF capacitor is charged to the specified voltage, then discharged through a 1.5kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating. 6. Machine model: A 200pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5Ω). This is done for all couples of connected pin combinations while the other pins are floating. 7. Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly to the ground through only one pin. This is done for all pins. 2/17 TS951-TS952-TS954 Table 2. Symbol VCC Vicm Toper Supply voltage Absolute maximum ratings and operating conditions Operating conditions Parameter Value 2.7 to 12 VDD -0.2 to VCC +0.2 -40 to +125 Unit V V °C Common mode input voltage range Operating free air temperature range 3/17 Electrical characteristics TS951-TS952-TS954 2 Electrical characteristics Table 3. Symbol Vio DVio Iio Input offset voltage Tmin ≤ Tamb ≤ Tmax Input offset voltage drift Input offset current Tmin ≤ Tamb ≤ Tmax Input bias current Vicm = VCC/2 Tmin ≤ Tamb ≤ Tmax Common mode rejection ratio Supply voltage rejection ratio VCC = 2.7V to 3.3V Large signal voltage gain Vo = 2Vpk-pk, RL = 600Ω High level output voltage RL = 600Ω Low level output voltage RL = 600Ω Output short-circuit current Supply current (per amplifier) No load, Vicm = VCC/2 Gain bandwidth product RL = 2kΩ Slew rate Phase margin at unit gain RL = 600Ω, CL =100pF Gain margin RL = 600Ω, CL =100pF Equivalent input noise voltage f = 1kHz Total harmonic distortion Vout = 4Vpk-pk, F = 10kHz, AV = 2, RL =10kΩ 10 0.9 1.3 2.8 50 2 1 30 80 VCC = +3V, VDD = 0V, RL connected to VCC/2, Tamb = 25°C (unless otherwise specified) Parameter Min. Typ. Max. 6 8 Unit mV µV/°C nA Iib CMR SVR 35 100 200 nA 80 dB dB 60 80 80 Avd VOH VOL Isc ICC GBP SR ∅m Gm dB 2.9 V 80 250 mV mA mA 3 1 60 MHz V/µs Degrees 10 dB nV ----------Hz en THD 25 0.01 % 4/17 TS951-TS952-TS954 Table 4. Symbol Vio DVio Iio Input offset voltage Tmin ≤ Tamb ≤ Tmax Input offset voltage drift Input offset current Vicm = VCC/2 Tmin ≤ Tamb ≤ Tmax Input bias current Vicm = VCC/2 Tmin ≤ Tamb ≤ Tmax Common mode rejection ratio Supply voltage rejection ratio VCC = 2.7V to 3.3V Large signal voltage gain Vo = 2Vpk-pk, RL = 600Ω High level output voltage RL = 600Ω Low level output voltage RL = 600Ω Output short-circuit current Supply current (per amplifier) No load, Vicm = VCC/2 Gain bandwidth product RL = 2kΩ Slew rate Phase margin at unit gain RL = 600Ω, CL =100pF Gain margin RL = 600Ω, CL =100pF Equivalent input noise voltage f = 1kHz Total harmonic distortion Vout = 4Vpk-pk, F = 10kHz, AV = 2, RL =10kΩ 10 4.7 50 60 Electrical characteristics VCC = +5V, VDD = 0V, RL connected to VCC/2, Tamb = 25°C (unless otherwise specified) Parameter Min. Typ. Max. 6 8 2 1 30 80 100 200 Unit mV µV/°C nA Iib CMR SVR Avd VOH VOL Isc ICC GBP SR ∅m Gm 35 80 80 86 4.8 nA dB dB dB V 80 300 mV mA 0.95 1.4 mA 3 1 60 MHz V/μs Degrees 10 dB nV ----------Hz en THD 25 0.01 % 5/17 Electrical characteristics TS951-TS952-TS954 Figure 1. Supply current vs. supply voltage Figure 2. Output short circuit current vs. output voltage Figure 3. Voltage gain and phase vs. frequency Figure 4. Supply current vs. temperature Figure 5. Output short circuit current vs. temperature Figure 6. Slew rate vs. temperature 6/17 TS951-TS952-TS954 Electrical characteristics Figure 7. THD + noise vs. Vout Figure 8. THD + noise vs. frequency Figure 9. THD + noise vs. Vout Figure 10. Equivalent input noise voltage vs. frequency 7/17 Package information TS951-TS952-TS954 3 Package information In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. 3.1 SOT23-5 package information Figure 11. SOT23-5 package mechanical drawing Table 5. SOT23-5 package mechanical data Dimensions Ref. Min. A A1 A2 b C D E E1 e e1 L 0.35 0.90 0.00 0.90 0.35 0.09 2.80 2.60 1.50 Millimeters Typ. Max. 1.45 0.15 1.30 0.50 0.20 3.00 3.00 1.75 0.95 1.9 0.55 13.7 Min. 35.4 0.00 35.4 13.7 3.5 110.2 102.3 59.0 Mils Typ. Max. 57.1 5.9 51.2 19.7 7.8 118.1 118.1 68.8 37.4 74.8 21.6 8/17 TS951-TS952-TS954 Package information 3.2 DIP8 package information Figure 12. DIP8 package mechanical drawing Table 6. DIP8 package mechanical data Dimensions Ref. Min. A A1 A2 b b2 c D E E1 e eA eB L 2.92 0.38 2.92 0.36 1.14 0.20 9.02 7.62 6.10 Millimeters Typ. Max. 5.33 0.015 3.30 0.46 1.52 0.25 9.27 7.87 6.35 2.54 7.62 10.92 3.30 3.81 0.115 4.95 0.56 1.78 0.36 10.16 8.26 7.11 0.115 0.014 0.045 0.008 0.355 0.300 0.240 Min. Inches Typ. Max. 0.210 0.130 0.018 0.060 0.010 0.365 0.310 0.250 0.100 0.300 0.195 0.022 0.070 0.014 0.400 0.325 0.280 0.430 0.130 0.150 9/17 Package information TS951-TS952-TS954 3.3 SO-8 package information Figure 13. SO-8 package mechanical drawing Table 7. SO-8 package mechanical data Dimensions Ref. Min. A A1 A2 b c D H E1 e h L k ccc 0.25 0.40 1° 0.10 1.25 0.28 0.17 4.80 5.80 3.80 Millimeters Typ. Max. 1.75 0.25 0.004 0.049 0.48 0.23 4.90 6.00 3.90 1.27 0.50 1.27 8° 0.10 0.010 0.016 1° 5.00 6.20 4.00 0.011 0.007 0.189 0.228 0.150 Min. Inches Typ. Max. 0.069 0.010 0.019 0.010 0.193 0.236 0.154 0.050 0.020 0.050 8° 0.004 0.197 0.244 0.157 10/17 TS951-TS952-TS954 Package information 3.4 TSSOP8 package information Figure 14. TSSOP8 package mechanical drawing Table 8. TSSOP8 package mechanical data Dimensions Ref. Min. A A1 A2 b c D E E1 e k L L1 aaa 0° 0.45 0.05 0.80 0.19 0.09 2.90 6.20 4.30 Millimeters Typ. Max. 1.2 0.15 1.00 1.05 0.30 0.20 3.00 6.40 4.40 0.65 8° 0.60 1 0.1 0.75 0° 0.018 3.10 6.60 4.50 0.002 0.031 0.007 0.004 0.114 0.244 0.169 Min. Inches Typ. Max. 0.047 0.006 0.039 0.041 0.012 0.008 0.118 0.252 0.173 0.0256 8° 0.024 0.039 0.004 0.030 0.122 0.260 0.177 11/17 Package information TS951-TS952-TS954 3.5 DIP14 package information Figure 15. DIP14 package mechanical drawing Table 9. DIP14 package mechanical data Dimensions Ref. Min. a1 B b b1 D E e e3 F I L Z 1.27 0.51 1.39 Millimeters Typ. Max. Min. 0.020 1.65 0.5 0.25 20 8.5 2.54 15.24 7.1 5.1 3.3 2.54 0.050 0.055 Inches Typ. Max. 0.065 0.020 0.010 0.787 0.335 0.100 0.600 0.280 0.201 0.130 0.100 12/17 TS951-TS952-TS954 Package information 3.6 SO-14 package information Figure 16. SO-14 package mechanical drawing Table 10. SO-14 package mechanical data Dimensions Ref. Min. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 8.55 5.8 0.35 0.19 0.1 Millimeters Typ. Max. 1.75 0.2 1.65 0.46 0.25 0.5 45° (typ.) 8.75 6.2 1.27 7.62 4.0 5.3 1.27 0.68 8° (max.) 0.149 0.181 0.019 0.336 0.228 0.013 0.007 0.003 Min. Inches Typ. Max. 0.068 0.007 0.064 0.018 0.010 0.019 0.344 0.244 0.050 0.300 0.157 0.208 0.050 0.026 13/17 Package information TS951-TS952-TS954 3.7 TSSOP14 package information Figure 17. TSSOP14 package mechanical drawing A A2 A1 b e K c L E D E1 PIN 1 IDENTIFICATION 1 Table 11. TSSOP14 package mechanical data Dimensions Ref. Min. A A1 A2 b c D E E1 e K L1 0° 0.45 0.05 0.8 0.19 0.09 4.9 6.2 4.3 Millimeters Typ. Max. 1.2 0.15 1 1.05 0.30 0.20 5 6.4 4.4 0.65 BSC 8° 0.60 0.75 0° 0.018 5.1 6.6 4.48 0.002 0.031 0.007 0.004 0.193 0.244 0.169 Min. Inches Typ. Max. 0.047 0.004 0.039 0.006 0.041 0.012 0.0089 0.197 0.252 0.173 0.0256 BSC 8° 0.024 0.030 0.201 0.260 0.176 14/17 TS951-TS952-TS954 Ordering information 4 Table 12. Ordering information Order codes Temperature range Package DIP8 SO-8 SOT23-5L SOT23-5L (Automotive grade) DIP8 SO-8 SO-8 (Automotive grade) -40°C to +125°C TSSOP8 TSSOP8 (Automotive grade) DIP14 SO-14 SO-14 (Automotive grade) TSSOP14 TSSOP14 (Automotive grade) Tape & reel 954Y Tube or Tape & reel 954IY 954I Tape & reel 952Y Tube TS954IN 954I Tube or Tape & reel 952IY 952I Tape & reel K102 Tube TS952IN 952I Packing Tube Tube or Tape & reel Marking TS951IN 951I K101 Part number TS951IN TS951ID TS951IDT TS951ILT TS951IYLT(1) TS952IN TS952ID TS952IDT TS952IYD(2) TS952IYDT(2) TS952IPT TS952IYPT(1) TS954IN TS954ID TS954IDT TS954IYD(2) TS954IYDT(2) TS954IPT TS954IYPT(1) 1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 & Q 002 or equivalent are on-going. 2. Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 & Q 002 or equivalent. 15/17 Revision history TS951-TS952-TS954 5 Revision history Table 13. Date 1-May-2001 2-Jan- 2005 3-Jul-2005 4-Aug-2005 15-Dec-2005 Document revision history Revision 1 2 3 4 5 Initial release. Modifications on AMR Table 1 on page 2 (explanation of Vid and Vi limits, ESD MM and CDM values added, Rthja added). PPAP references inserted in the datasheet see Table 12: Order codes. Table data was badly formatted, see Table 4 on page 5. TS951IYLT PPAP reference added, see Table 12: Order codes. Added missing order codes, and automotive grade status in Table 12: Order codes. Updated footnotes for ESD parameters in Table 1: Absolute maximum ratings (AMR). Reformatted package information. Changes 10-Dec-2007 6 16/17 TS951-TS952-TS954 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 17/17