VN750B5TR-E

VN750-E High-side driver Datasheet − production data Features Type VN750-E VN750PT-E VN750B5-E VN750-12-E RDS(on) IOUT VCC 60 mΩ 6A 36 V 3(17$: $77 *$3*5, 3(17$:$77 LQOLQH *$3*5, ■ ECOPACK®: lead free and RoHS compliant ■ Automotive Grade: compliance with AEC guidelines  3 3$.  33$ . ■ CMOS compatible input ■ On-state open-load detection ■ Off-state open-load detection ■ Shorted load protection Description ■ Undervoltage and overvoltage shutdown ■ Protection against loss of ground ■ Very low standby current ■ Reverse battery protection The VN750-E is a monolithic device designed in STMicroelectronics® VIPower® M0-3 technology intended for driving any kind of load with one side connected to ground. *$3*5, *$3*5, Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). Active current limitation combined with thermal shutdown and automatic restart help protect the device against overload. The device detects open load condition in on-state and off-state. Output shorted to VCC is detected in the off-state. Device automatically turns off in case of ground pin disconnection. Table 1. Device summary Order codes Package Tube Tape and reel PENTAWATT VN750-E - P2PAK VN750B5-E VN750B5TR-E PPAK VN750PT-E VN750PTTR-E PENTAWATT in-line VN750-12-E - September 2013 This is information on a product in full production. Doc ID 10891 Rev 7 1/38 www.st.com 1 Contents VN750-E Contents 1 Block diagram and pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 Electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 4 2.1 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.2 Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.4 Electrical characteristics curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2.5 GND protection network against reverse battery . . . . . . . . . . . . . . . . . . . 16 2.5.1 Solution 1: resistor in the ground line (RGND only) . . . . . . . . . . . . . . . . 16 2.5.2 Solution 2: diode (DGND) in the ground line . . . . . . . . . . . . . . . . . . . . . 17 2.6 Load dump protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.7 Microcontroller I/Os protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.8 Open-load detection in off-state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.9 PPAK/P2PAK maximum demagnetization energy (VCC=13.5V) . . . . . . . 19 Package and PCB thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 3.1 P2PAK thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 3.2 PPAK thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Package and packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 4.1 ECOPACK® packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 4.2 PENTAWATT mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 4.2.1 5 2/38 PENTAWATT (in-line) mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . 27 2 4.3 P PAK mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 4.4 PPAK mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 4.5 PENTAWATT packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 4.6 P2PAK packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 4.7 PPAK packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Doc ID 10891 Rev 7 VN750-E List of tables List of tables Table 1. Table 2. Table 3. Table 4. Table 5. Table 6. Table 7. Table 8. Table 9. Table 10. Table 11. Table 12. Table 13. Table 14. Table 15. Table 16. Device summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Suggested connections for unused and not connected pins . . . . . . . . . . . . . . . . . . . . . . . . 5 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Thermal data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Truth table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Electrical transient requirements on VCC pin (part 1/3). . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Electrical transient requirements on VCC pin (part 2/3). . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Electrical transient requirements on VCC pin (part 3/3). . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 P2PAK thermal parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 PPAK thermal parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 PENTAWATT mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 PENTAWATT (in-line) mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 P2PAK mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 PPAK mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Doc ID 10891 Rev 7 3/38 List of figures VN750-E List of figures Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. Figure 14. Figure 15. Figure 16. Figure 17. Figure 18. Figure 19. Figure 20. Figure 21. Figure 22. Figure 23. Figure 24. Figure 25. Figure 26. Figure 27. Figure 28. Figure 29. Figure 30. Figure 31. Figure 32. Figure 33. Figure 34. Figure 35. Figure 36. Figure 37. Figure 38. Figure 39. Figure 40. Figure 41. Figure 42. Figure 43. Figure 44. 4/38 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Configuration diagram (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Current and voltage conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Status timings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Switching time waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Off-state output current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 High level input current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Input clamp voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Status leakage current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Status low output voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Status clamp voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 On-state resistance Vs Tcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 On-state resistance Vs VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Open-load on-state detection threshold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Input high level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Input low level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Input hysteresis voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Overvoltage shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Open-load off-state voltage detection threshold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Turn-on voltage slope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Turn-off voltage slope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Ilim Vs Tcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Application schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Open-load detection in off-state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PPAK /P2PAK maximum turn-off current versus inductance . . . . . . . . . . . . . . . . . . . . . . . 19 P2PAK PC board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 P2PAK Rthj-amb Vs. PCB copper area in open box free air condition . . . . . . . . . . . . . . . 20 P2PAK thermal impedance junction ambient single pulse . . . . . . . . . . . . . . . . . . . . . . . . . 21 P2PAK thermal fitting model of a single channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 PPAK PC board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 PPAK Rthj-amb Vs. PCB copper area in open box free air condition . . . . . . . . . . . . . . . . 23 PPAK thermal impedance junction ambient single pulse . . . . . . . . . . . . . . . . . . . . . . . . . 23 PPAK thermal fitting model of a single channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 PENTAWATT package dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 PENTAWATT (in-line) package dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 P2PAK package dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 PPAK package dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 PENTAWATT tube shipment (no suffix) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 P2PAK tube shipment (no suffix) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 P2PAK tape and reel (suffix “13TR”). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 PPAK suggested pad layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 PPAK tube shipment (no suffix) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 PPAK tape and reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Doc ID 10891 Rev 7 VN750-E 1 Block diagram and pin description Block diagram and pin description Figure 1. Block diagram 9 && 29(592/7$*( '(7(&7,21 9 && &ODPS 81'(592/7$*( '(7(&7,21 *1' 3RZHU  &/$03 '5,9(5  ,1387 287387 /2*,& &855(17  /,0,7(5 21 67$7(  23(1/2$' '(7(&7,21 67$786  29(57(03(5$785( '(7(&7,21 2))  67$7(  23(1/2$' $1'  287387  6+257('  72  9 && '(7(&7,21 *$3*5, Figure 2. Configuration diagram (top view) 287387 67$786 9&& ,1387 *1'      33$.33$. 3(17$:$77 *$3*5, *$3*5, Table 2. Suggested connections for unused and not connected pins Connection/pin Status N.C. Output Input Floating X X X X To ground X Doc ID 10891 Rev 7 Through 10 KΩ resistor 5/38 Electrical specifications 2 VN750-E Electrical specifications Figure 3. Current and voltage conventions ,6 9) ,,1 ,1387 9&& ,67$7 ,287 67$786 9&& 287387 *1' 9,1 967$7 9287 ,*1' *$3*5, 2.1 Absolute maximum ratings Stress values that exceed those listed in the “Absolute maximum ratings” table can cause permanent damage to the device. These are stress ratings only, and operation of the device at these, or any other conditions greater than those, indicated in the operating sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Refer also to the STMicroelectronics sure program and other relevant quality documents. Table 3. Absolute maximum ratings Value Symbol Parameter P2PAK PENTAWATT VCC 41 V - VCC Reverse DC supply voltage - 0.3 V - Ignd DC reverse ground pin current - 200 mA IOUT DC output current Internally limited A -6 A - IOUT 6/38 DC supply voltage Unit PPAK Reverse DC output current IIN DC input current +/- 10 mA ISTAT DC status current +/- 10 mA VESD Electrostatic discharge (human body model: R=1.5 KΩ; C=100pF) - Input - Status - Output - VCC 4000 4000 5000 5000 V V V V Doc ID 10891 Rev 7 VN750-E Electrical specifications Table 3. Absolute maximum ratings (continued) Value Symbol Parameter PENTAWATT EMAX Ptot 138 138 mJ 60 W Internally limited °C Tj Junction operating temperature Tc Case operating temperature - 40 to 150 °C Storage temperature - 55 to 150 °C Tstg 2.2 PPAK Maximum switching energy (L=2.46 mH; RL=0 Ω; Vbat=13.5 V; Tjstart=150 °C; IL=9 A) Power dissipation TC=25°C Unit P2PAK Thermal data Table 4. Thermal data Max. value Symbol Parameter Unit PENTAWATT P2PAK PPAK Rthj-case Thermal resistance junction-case 2.1 2.1 2.1 °C/W Rthj-lead Thermal resistance junction-lead - - - °C/W 62.1 52.1(1) 77.1(1) °C/W 62.1 37(2) 44(2) °C/W Rthj-amb Thermal resistance junction-ambient 1. When mounted on a standard single-sided FR-4 board with 0.5cm2 of Cu (at least 35µm thick). Horizontal mounting and no artificial air flow. 2. When mounted on a standard single-sided FR-4 board with 6cm2 of Cu (at least 35µm thick). Horizontal mounting and no artificial air flow. 2.3 Electrical characteristics Values specified in this section are for 8 VTjsh Ilim Current limitation 9 V