VNQ860SP

P 6 ® VNQ860 / VNQ860SP QUAD CHANNEL HIGH SIDE DRIVER TYPE VNQ860 VNQ860SP (*) Per each channel RDS(on) (*) 270mΩ IOUT 0.25A VCC 36V CMOS COMPATIBLE I/Os s UNDERVOLTAGE & OVERVOLTAGE nSHUT- DOWN s SHORTED LOAD PROTECTION s THERMAL SHUTDOWN s VERY LOW STAND-BY CURRENT s PROTECTION AGAINST LOSS OF GROUND s 10 1 SO-20 PowerSO-10™ DESCRIPTION The VNQ860, VNQ860SP are monolithic devices made using| STMicroelectronics VIPower M0-3 Technology, intended for driving any kind load with one side connected to ground. Active current limitation combined with thermal shutdown and automatic restart protect the device against overload. Device automatically turns off in case of ground pin disconnection. This device is BLOCK DIAGRAM ORDER CODES SO-20 VNQ860 PowerSO-10™ VNQ860SP especially suitable for industrial applications in norms conformity with IEC1131 (Programmable Controllers International Standard). VCC VCC CLAMP GND OVERVOLTAGE DETECTION UNDERVOLTAGE DETECTION Power CLAMP I/O 1 OVERTEMP I/O 2 CURRENT LIMITER Power CLAMP OVERTEMP LOGIC I/O 4 OVERTEMP STATUS Power CLAMP OVERTEMP CURRENT LIMITER OUTPUT4 Power CLAMP CURRENT LIMITER OUTPUT3 CURRENT LIMITER OUTPUT2 OUTPUT1 I/O 3 January 2003 1/10 1 VNQ860 / VNQ860SP ABSOLUTE MAXIMUM RATING Symbol VCC - VCC - IGND IOUT - IOUT IIN VIN VSTAT VESD Ptot Tj Tc Tstg Parameter DC supply voltage Reverse DC supply voltage DC reverse ground pin current DC output current Reverse DC output current DC Input current Input voltage range DC Status voltage Electrostatic discharge (R=1.5 KΩ; C=100 pF) Power dissipation TC=25 °C Junction operating temperature Case operating temperature Storage temperature SO-20 Value PowerSO-10 41 - 0.3 - 200 Internally Limited -2 +/- 10 -3/+VCC + VCC 2000 16 90 Internally Limited - 40 to 150 - 55 to 150 Unit V V mA A A mA V V V W °C °C °C CONNECTION DIAGRAM I/O 4 OUTPUT 4 N.C. VCC VCC VCC VCC OUTPUT 1 I/O 1 STATUS 1 20 GROUND I/O 3 OUTPUT 3 VCC VCC VCC VCC N.C. OUTPUT 2 VCC OUTPUT 3 I/O 3 GND I/O 4 OUTPUT 4 6 7 8 9 10 TAB 5 4 3 2 1 OUTPUT 2 I/O 2 STATUS I/O 1 OUTPUT 1 10 11 I/O 2 CURRENT AND VOLTAGE CONVENTIONS ICC VCC II/O1 I/O1 VI/O1 VI/O2 VI/O3 VI/O4 II/O2 I/O2 II/O3 I/O 3 II/O4 I/O 4 ISTAT STATUS GND OUTPUT 4 OUTPUT 3 IOUT4 VOUT4 VOUT3 OUTPUT 2 IOUT3 VOUT2 OUTPUT 1 IOUT2 IOUT1 VOUT1 VCC VSTAT IGND 2/10 1 VNQ860 / VNQ860SP THERMAL DATA Symbol Rtj-amb Rtj-case Rtj-pin Parameter Thermal resistance junction-pins Thermal resistance junction-ambient (*) Thermal resistance junction-case (MAX) (MAX) (MAX) SO-20 8 58 Value PowerSO-10 50 1.4 Unit oC/W oC/W oC/W (*) When mounted on FR4 printed circuit board with 0.5 cm2 of copper area (at least 35µ thick) connected to all VCC pins. ELECTRICAL CHARACTERISTICS (8V