DEA075150HT-8036A1

Nov. 2015 Ver.1.0 TDK Corporation Multilayer High Pass Filter For 5GHz W-LAN DEA Series P/N: 0.65x0.5mm [EIA 0202] TYPE DEA075150HT-8036A1 All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies PRELIMINARY Nov. 2015 Ver.1.0 TDK Corporation DEA075150HT-8036A1 ■ SHAPES AND DIMENSIONS Dimensions (mm) L W T a b c d 0.65 0.50 0.25 0.20 0.20 0.115 0.21 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 　 　 Terminal functions Input Port (1) Output Port (2) GND (3) GND (4) Note: These samples are marked with trial sample identification. In mass production, this sample marking will be changed to show in the TDK full specification. ■ TEMPERATURE RANGE Operating temperature –40 to +85 °C Storage temperature –40 to +85 °C ■ TERMINATION FINISH Material Au plate All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies PRELIMINARY Nov. 2015 Ver.1.0 TDK Corporation DEA075150HT-8036A1 ■ ELECTRICAL CHARACTERISTICS Parameter Insertion Loss (dB) Attenuation (dB) Characteristic Impedance (ohm) Ta = +25+/-5°C ( Measurement ) TDK Spec Min. Typ. Max. 5850 0.17 0.50 2500 15 28 50 (Nominal) Frequency (MHz) 5150 to 2400 to All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies Nov. 2015 Ver.1.0 TDK Corporation PRELIMINARY DEA075150HT-8036A1 ■ FREQUENCY CHARACTERISTICS S11 POLA REF 1.0 U 1 VSWR SCALE 1.0U FS S21 Log MAG REF 0.0dB SCALE 1dB/ 0 jV MARKER 1 5150 MHz 1.08 0.8 1 MARKER 1 5150 MHz 0.17 dB 2 MARKER 2 5850 MHz 0.12 dB 1 0.6 MARKER 2 5850 MHz 1.05 0.4 0.2 0 1 -0.2 -0.4 -0.8 3 MARKER 6 0 MHz #N/A -1 Log MAG MARKER 4 0 MHz #N/A MARKER 5 0 MHz #N/A -0.6 S21 2 MARKER 3 0 MHz #N/A dB U 0 -1 MARKER 3 0 MHz #N/A REF 0.0dB SCALE 5.0dB/ MARKER 4 0 MHz #N/A dB MARKER 5 0 MHz #N/A dB 4 5 4000 S11 0 5 10 15 MARKER 1 2400 MHz 34.7 dB 0 MARKER 2 2500 MHz 28.1 dB 10 MARKER 3 0 MHz #N/A dB 20 25 MARKER 6 0 MHz #N/A dB INSERTION LOSS 4500 5000 Log MAG 5500 REF -10.0dB 6000 6500 SCALE 5.0dB/ MARKER 1 5150 MHz 27.9 dB 5 MARKER 2 5850 MHz 31.7 dB 15 MARKER 3 0 MHz #N/A dB 20 25 30 MARKER 4 0 MHz 0.0 dB 2 35 MARKER 4 0 MHz #N/A dB 1 30 2 35 MARKER 5 0 MHz 0.0 dB 1 40 45 ATTENUATION 50 500 S21 1000 1500 2000 Log MAG 2500 REF 0.0dB 3000 3500 4000 MARKER 6 0 MHz 0.0 dB MARKER 5 0 MHz #N/A dB 40 45 RETURN LOSS 50 4000 4500 5000 5500 6000 6500 MARKER 6 0 MHz #N/A dB SCALE 5.0dB/ 0 4 3 5 ATTENUATION 10 MARKER 7 2400 MHz 34.7 dB MARKER 8 2500 MHz 28.1 dB 15 20 MARKER 9 5150 MHz 0.17 dB 25 30 2 MARKER 10 5850 MHz 0.12 dB 35 1 40 MARKER 11 0 MHz #N/A dB 45 50 MARKER 12 0 MHz #N/A dB 55 60 500 1500 2500 3500 4500 5500 6500 7500 8500 9500 10500 11500 12500 All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies PRELIMINARY Nov. 2015 Ver.1.0 TDK Corporation DEA075150HT-8036A1 ■ RECOMMENDED LAND PATTERN ■ ENVIROMENT INFORMATION RoHS Statement RoHS Compliance All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies Nov. 2015 Ver.1.0 TDK Corporation PRELIMINARY DEA075150HT-8036A1 ■ RECOMMENDED REFLOW PROFILE Pb free solder Soaking Temp. Time t1 T1 T2 150°C 180°C 60 to 120sec Temp. T3 230°C Working Time t2 more than 30sec Soldering Temp. Time T4 t3 Peak Temp. T5 247 to 253°C within 10sec 260°C Max. All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies Nov. 2015 Ver.1.0 TDK Corporation PRELIMINARY DEA075150HT-8036A1 ■ PACKAGING STYLE Reel Dimensions 13+/-0.2 13.0+/-1.0 2.0+/-0.5 60+1.0/-0.0 Label 21+/-0.8 180+0/-1.5 Unit: mm 9+1.0/-0.0 Carrier Tape STANDARD PACKAGE QUANTITY ( pieces/reel ) 10,000 All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS The products listed on this specification sheet are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for any other use exceeding the range or conditions set forth in this specification sheet. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Aerospace/Aviation equipment Transportation equipment (cars, electric trains, ships, etc.) Medical equipment Power-generation control equipment Atomic energy-related equipment Seabed equipment Transportation control equipment Public information-processing equipment Military equipment Electric heating apparatus, burning equipment Disaster prevention/crime prevention equipment Safety equipment Other applications that are not considered general-purpose applications When using this product in general-purpose applications, you are kindly requested to take into consideration securing protection circuit/equipment or providing backup circuits, etc., to ensure higher safety. All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies