SPECIFICATION
SPEC. No. C060NAA00321
DATE: Apr.26th,2017
To
XIAMEN XIANGGAO ELECTRONICS CO.,LTD
CUSTOMER’S PRODUCT NAME
TDK’S PRODUCT NAME
HHM22137A1
HHM22137A1
RECEIPT CONFIRMATION
DATE:
TDK Corporation
Sales
YEAR
MONTH
DAY
Engineering
Electronic Components Sales &
Marketing Group
Electronic Components Business Company
Communication Devices Business Group
APPROVED
Person in charge
APPROVED
CHECKED
N.Harada
N.Ootsuka
Person in charge
H.Ashida
No. C060NAA00321
2/15
Apr.26th,2017
TDK Corporation
Specification Change History
Customer’s Product Name : HHM22137A1
TDK Product Name :
HHM22137A1
Ver.
Date
Person in
charge
-
Apr.26th,2017
H.Ashida
Change Item
Initial issue
No. C060NAA00321
3/15
Directional Coupler Specification
Apr.26th,2017
(TDK Part Number : HHM22137A1)
TDK Corporation
1. Marking
Direction Mark
2. Mechanical Outline
2-1 Package
Package:
Surface mount package
Delivery medium:
Tape on reel
Soldering method:
IR-reflow
Size:
1.60 X 0.80mm typ.
Height:
0.60 mm typ.
[MECHANICAL CHARACTERISTICS]
50 ohm
GND
Dimensions (mm)
L
W
T
1.60 0.80 0.60
a
0.10
b
0.30
c
0.25
d
0.55
e
0.15
+/-0.10
+/-0.10
+/-0.10
+/-0.10
+/-0.10
+/-0.10
+/-0.10
+/-0.10
Terminal functions
Output Port
(1)
GND
(2)
Input Port
(3)
(4)
(5)
(6)
Monitor
Output
4
6
5
1
2
3
OUT
GND
IN
Monitor Output Port
GND
50ohm Termination
No. C060NAA00321
4/15
Apr.26th,2017
TDK Corporation
2-2. Coplanarity of HHM22137A1
0.05mm max. difference in Z-direction as follows
Coplanarity measurement method
1.6mm
Coplanarity = T1-T2
Z
0.05mm
Terminal
Each terminal extends the full of the HHM22137A1. Hence any coplanarity deviation between
terminals is due to curvature in the substrate. TDK guarantees that the edge of each terminal is
within 0.05mm of the horizontal plane.
3. Environment (Temperature & Humidity)
3-1 Operating & Storage condition
Storage temperature range:
-40 ~ +85 oC
Operating temperature range: -40 ~ +85 oC
Humidity:
0 ~ 90 % RH (Max. wet bulb temperature 38oC)
3-2 Storage condition before soldering
Temperature:
+5 ~ +30 oC
Humidity:
20 ~ 70 % RH
Term of storage:
Baking:
Within 6 months
Unnecessary
No. C060NAA00321
5/15
Apr.26th,2017
TDK Corporation
4. Electrical Specification
(Ta=25+/-5 OC)
Parameter
Coupling Factor (dB)
Coupling Factor (dB)
Insertion Loss (dB)
Isolation (dB)
Isolation (dB)
Part to part coupling
factor variation
Over temperature
coupling factor variation
Return Loss (dB)
( Input Port )
( Coupling Port )
Coupling factor variation
over frequency (MHz)
Frequency
(MHz)
578 to
673
673 to 2700
2700 to 3500
3500 to 12750
673 to 2700
2700 to 3500
3500 to 12750
578 to 2700
673 to 2700
673 to 2700
2700 to 3500
3500 to 12750
673 to 2700
673
578
2700
3500
578
2700
3500
578
699
807
852
880
925
1425
1475
1525
1625
1705
1805
1850
1920
2110
2300
2490
to
TDK Spec
Min. Typ. Max.
27.3
24.7
14.3
8.7
22.0
25.5
28.5
13.0
14.6
7.0
9.8
0.13
0.20
45.0
47.0
20.0
23.2
13.0
14.1
4.0
8.0
1.0
0.3
1.0
2700 -0.5
to 2700
to 3500
to 12750
to 2700
to 3500
to 12750
to
673 -0.65
to
748 -0.35
to
849 -0.20
to
894 -0.20
to
915 -0.20
to
960 -0.20
to 1465 -0.10
to 1510 -0.10
to 1560 -0.10
to 1661 -0.10
to 1785 -0.20
to 1885 -0.30
to 1920 -0.30
to 2025 -0.40
to 2170 -0.30
to 2400 -0.30
to 2700 -1.70
0.3
0.5
-19.9
-12.5
-1.0
±0.54
±0.25
±0.16
±0.15
±0.10
±0.13
±0.00
±0.01
±0.02
±0.05
±0.14
±0.19
±0.18
±0.03
±0.17
±0.09
±1.32
-15.0
-15.0
-10.0
0.0
0.65
0.35
0.20
0.20
0.20
0.20
0.10
0.10
0.10
0.10
0.20
0.30
0.30
0.40
0.30
0.30
1.70
Comments
Input and output 50ohms
Input and output VSWR 2:1
(R=100ohm)
Input and output 50ohms
Input and output 50ohms
Input port at 40:1 VSWR
(R=2000ohm)
Input and output VSWR 2:1
Input and output VSWR 2:1
No. C060NAA00321
6/15
Apr.26th,2017
TDK Corporation
Parameter
Insertion loss from couling
and 50ohm term port
TDK Spec
Frequency
(MHz)
Min. Typ. Max.
578 to 2700
0.92
1.30
Characteristic Impedance (ohm)
( Input / Output Port )
( Coupling Port )
(Termination Port )
Power Capacity (dBm)
Coupler Type
Daisy Chain Available
Bi-Directional
50 (Nominal)
-
Yes
No
-
35
Comments
No. C060NAA00321
7/15
Apr.26th,2017
TDK Corporation
5.Typical electrical characteristics
Coupling
Frequency
578 MHz
673 MHz
2700 MHz
3500 MHz
5950 MHz
9800 MHz
12750 MHz
Coupling
27.8 dB
26.8 dB
22.7 dB
14.3 dB
13.4 dB
30.1 dB
16.1 dB
Frequency
578 MHz
673 MHz
2700 MHz
3500 MHz
5950 MHz
9800 MHz
12750 MHz
Isolaiton
47.7 dB
47.1 dB
50.6 dB
34.0 dB
18.0 dB
23.8 dB
14.9 dB
Frequency
578 MHz
673 MHz
2700 MHz
3500 MHz
5950 MHz
9800 MHz
12750 MHz
Insertion Loss
0.05 dB
0.05 dB
0.12 dB
0.31 dB
0.47 dB
0.41 dB
0.48 dB
Frequency
578 MHz
673 MHz
2700 MHz
3500 MHz
5950 MHz
9800 MHz
12750 MHz
Return Loss
22.0 dB
21.7 dB
28.9 dB
13.8 dB
3.1 dB
3.5 dB
2.2 dB
Isolaiton
Insertion Loss
Return Loss (Coupling Port)
No. C060NAA00321
8/15
Apr.26th,2017
TDK Corporation
Insersion Loss @ Coupling and 50 ohm term port
Frequency
578 MHz
673 MHz
2700 MHz
3500 MHz
5950 MHz
9800 MHz
12750 MHz
Insertion Loss
0.39 dB
0.40 dB
0.92 dB
1.30 dB
11.78 dB
4.76 dB
15.37 dB
Coupling @ input and output 50ohm
Coupling @ input 100ohm
Coupling @ output 100ohm
Frequency
673
1700
2700
3500
5950
9800
12750
MHz
MHz
MHz
MHz
MHz
MHz
MHz
Coupling
50ohm
26.8
23.3
22.7
14.3
13.4
30.1
16.1
In/100
Out/100
27.0
23.4
22.7
14.6
12.5
28.8
15.1
27.3
23.8
23.1
14.6
13.8
30.3
16.9
Isolation @ input and output 50ohm
Isolation @ input 2000 ohm
Frequency
673
1700
2700
3500
5950
9800
12750
MHz
MHz
MHz
MHz
MHz
MHz
MHz
Isolaiton
50ohm
47.1
48.9
50.6
34.0
18.0
23.8
14.9
2000ohm
27.8
24.0
23.2
14.1
22.4
23.1
23.0
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
No. C060NAA00321
9/15
Apr.26th,2017
TDK Corporation
6. Test Circuit
Network
Analyzer
50 ohm
PORT1
PORT2
PORT3
50ohm
Note 1: The Port Extension
function on the Network Analyzer
is used to extend the calibration
plane to the DUT terminals.
IN
D.U.T
OUT
Note 2: Loss in the PCB traces is
compensated for by measurement
50 ohm term
data taken on a PCB Thru’ line.
Coupling
50 ohm
7. Recommended Land Pattern
Unit: mm
No. C060NAA00321
10/15
Apr.26th,2017
TDK Corporation
8. Environmental and quality proposal
This product satisfies the electrical specification after the following tests.
(When measured after two hours in normal conditions)
Temperature
All data initially taken at +25°C, then repeated at -40°C and again at
characteristics:
+85°C.
Heat proof:
+85 °C+/-2 °C for 1000 hours
Cold proof:
-40 °C +/-2 °C or 500 hours
Moisture proof:
+60 °C +/-2 °C, 90~95% R.H.
Heat shock:
Vibration:
-40 ~ +85 °C for 350 cycles
each cycle being 30 min
10-500Hz vibration frequency (10G Max.)
with 1.52mmp-p amplitude for two hours in x,y,z directions
1.Acceleration
Mechanical shock:
for 1000 hours
2.Direction
3.Time
1000m/s2
X, Y, Z ,X’,Y’,Z’,axes
6ms duration and 3 times in each direction
The dipped surface of the terminal shall be at least 75% covered with
solder after dipped in solder bath of 245 oC+/-3 °C for 3+/-0.5 sec.
Solderability
Remark solder: Sn-3.0Ag-0.5Cu
Remark flux:
Solder heat shock:
Rosin 25%, Alcohol 75%
It shall be possible to hot air reflow the components three times with a
temperature profile shown below.
Drop shock:
Dropped onto steel plate or concrete from 100cm height three times.
Bending test:
Solder specimen components on the test printed circuit board(L:100 x
w:40 x t:0.8mm) in appended recommended PCB pattern Apply the load
in direction of the arrow until bending reaches 1mm for 5+/-1 sec.
No. C060NAA00321
11/15
Apr.26th,2017
TDK Corporation
R230
1
gap+/-1
45
45
Unit:mm
Board adhesion
Solder specimen components on the test printed circuit board(L:100 x
(Push test):
w:40 x t:0.8mm) in appended recommended PCB pattern Apply the load
in direction of the arrow until 5N for 5 +/-1 sec .
PCB
DUT
5N
No. C060NAA00321
12/15
Apr.26th,2017
TDK Corporation
9. Recommended reflowing temperature profile
Pb free solder
3oC/sec
or lower
Preheating
Temp.
T1
T2
Time
t1
150°C 200°C 60 to 120sec
6oC /sec
or lower
Soldering
Critical zone (T3 to T4)
Peak
Time
Temp.
Time
Temp.
T3
t2
T4
t3 *
217°C
60 to 120sec
240 to 260°C
30 sec Max
* t3 : Time within 5°C of actual peak temperature
The maximum number of reflow is 3.
Note:
Lead free solder is recommended.
Recommended solder is Sn-3.0Ag-0.5Cu. (M705 by Senju Metal Industry)
No. C060NAA00321
13/15
Apr.26th,2017
TDK Corporation
10. Packing
10-1 Carrier tape
Carrier tape 1 , Material : paper
K
Loading Direction
J
E
Sprocket hole
C
D
A
B
H
A
B
C
D
G
E
F
F
Unit : mm
G
H
J
K
0.97
1.8
8.0
3.5
1.75
4.0
2.0
4.0
1.5
0.8
+/-0.05
+/-0.05
+/-0.2
+/-0.05
+/-0.1
+/-0.1
+/-0.05
+/-0.1
+0.1/-0
MAX
Carrier tape 2 , Material : PS
K
Loading Direction
J
E
Sprocket hole
C
D
A
B
H
t
G
F
Unit : mm
A
B
C
D
E
F
G
H
J
K
t
0.97
1.8
8.0
3.5
1.75
4.0
2.0
4.0
1.5
0.8
0.25
+/-0.05
+/-0.05
+/-0.2
+/-0.05
+/-0.1
+/-0.1
+/-0.05
+/-0.1
+0.1/-0
MAX
+/-0.05
“Carrier tape 1” is currently adopted. "Carrier tape 2" will be running change after Feb.2016.
No. C060NAA00321
14/15
Apr.26th,2017
TDK Corporation
10-2. Reel Dimensions
13+/-0.2
13.0+/-1.0
LabelA
2.0+/-0.5
60+1.0/-0
LabelB
21+/-0.8
180 +0/-1.5
9.0 +1.0/-0
10-3. Standard Reel Packaging quantities
4000pcs./reel
Unit : mm
No. C060NAA00321
15/15
Apr.26th,2017
TDK Corporation
11. Other
11-1 Notice
The products listed on this specification sheet are intended for use in general electronic equipment (AV
equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment,
personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation
and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below,
whose performance and/or quality require a more stringent level of safety or reliability, or whose failure,
malfunction or trouble could cause serious damage to society, person or property. Please understand that
we are not responsible for any damage or liability caused by use of the products in any of the applications
below or for any other use exceeding the range or conditions set forth in this specification sheet.
Aerospace/Aviation equipment
Transportation equipment (cars, electric trains, ships, etc.)
Medical equipment
Power-generation control equipment
Atomic energy-related equipment
Seabed equipment
Transportation control equipment
Public information-processing equipment
Military equipment
Electric heating apparatus, burning equipment
Disaster prevention/crime prevention equipment
Safety equipment
Other applications that are not considered general-purpose applications
When using this product in general-purpose applications, you are kindly requested to take into
consideration securing protection circuit/equipment or providing backup circuits, etc., to ensure higher
safety.
11-2 Product Origin
1.
TDK Akita Corporation, Akita, Japan
2.
TDK Dalian Corporation, Dalian ,China