BAV100, BAV101, BAV102, BAV103
www.vishay.com
Vishay Semiconductors
Small Signal Switching Diodes, High Voltage
FEATURES
• Silicon epitaxial planar diode
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
• General purposes
LINKS TO ADDITIONAL RESOURCES
3D 3D
3D Models
MECHANICAL DATA
Case: MiniMELF (SOD-80)
Weight: approx. 31 mg
Cathode band color: black
Packaging codes / options:
GS18/10K per 13" reel (8 mm tape), 10K/box
GS08/2.5K per 7" reel (8 mm tape), 12.5K/box
PARTS TABLE
PART
TYPE
DIFFERENTIATION
ORDERING CODE
TYPE
MARKING
CIRCUIT CONFIGURATION
REMARKS
BAV100
VRRM = 60 V
BAV100-GS18 or BAV100-GS08
-
Single
Tape and reel
BAV101
VRRM = 120 V
BAV101-GS18 or BAV101-GS08
-
Single
Tape and reel
BAV102
VRRM = 200 V
BAV102-GS18 or BAV102-GS08
-
Single
Tape and reel
BAV103
VRRM = 250 V
BAV103-GS18 or BAV103-GS08
-
Single
Tape and reel
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
Repetitive peak reverse voltage
Reverse voltage
PART
SYMBOL
VALUE
UNIT
BAV100
VRRM
60
V
BAV101
VRRM
120
V
BAV102
VRRM
200
V
BAV103
VRRM
250
V
BAV100
VR
50
V
BAV101
VR
100
V
BAV102
VR
150
V
BAV103
Peak forward surge current
Repetitive peak forward current
Forward continuous current
Power dissipation
tp = 1 s
VR
200
V
IFSM
1
A
IFRM
625
mA
IF
250
mA
Ptot
500
mW
Rev. 1.9, 26-Nov-2021
Document Number: 85542
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAV100, BAV101, BAV102, BAV103
www.vishay.com
Vishay Semiconductors
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
RthJL
350
K/W
RthJA
500
K/W
Thermal resistance junction to lead
Thermal resistance junction to ambient air
On PC board
50 mm x 50 mm x 1.6 mm
Junction temperature
Storage temperature range
Tj
175
°C
Tstg
-65 to +175
°C
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
Forward voltage
PART
IF = 100 mA
Reverse current
Breakdown voltage
Differential forward current
Reverse recovery time
MIN.
TYP.
MAX.
UNIT
VF
1
V
VR = 50 V
BAV100
IR
100
nA
VR = 100 V
BAV101
IR
100
nA
VR = 150 V
BAV102
IR
100
nA
VR = 200 V
BAV103
IR
100
nA
Tj = 100 °C, VR = 50 V
BAV100
IR
15
μA
Tj = 100 °C, VR = 100 V
BAV101
IR
15
μA
Tj = 100 °C, VR = 150 V
BAV102
IR
15
μA
15
μA
Tj = 100 °C, VR = 200 V
BAV103
IR
IR = 100 μA, tp/T = 0.01,
tp = 0.3 ms
BAV100
V(BR)
60
V
IR = 100 μA, tp/T = 0.01,
tp = 0.3 ms
BAV101
V(BR)
120
V
BAV102
V(BR)
200
V
BAV103
V(BR)
250
V
IR = 100 μA, tp/T = 0.01,
tp = 0.3 ms
Diode capacitance
SYMBOL
VR = 0 V, f = 1 MHz,
VHF = 50 mV
CD
1.5
pF
IF = 10 mA
rf
5
Ω
IF = IR = 30 mA,
iR = 3 mA, RL = 100 Ω
trr
50
ns
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
1000
100
I F - Forward Current (mA)
I R - Reverse Current (µA)
1000
Scattering Limit
10
1
VR = VRRM
0.1
0.01
Scattering Limit
10
1
0.1
0
94 9084
Tj = 25 °C
100
40
80
120
160
200
Tj - Junction Temperature (°C)
Fig. 1 - Reverse Current vs. Junction Temperature
0
94 9085
0.4
0.8
1.2
1.6
2.0
V F - Forward Voltage (V)
Fig. 2 - Forward Current vs. Forward Voltage
Rev. 1.9, 26-Nov-2021
Document Number: 85542
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAV100, BAV101, BAV102, BAV103
rf - Differential Forward Resistance (Ω)
www.vishay.com
Vishay Semiconductors
1000
100
Tj = 25 °C
10
1
0.1
1
10
100
I F - Forward Current (mA)
94 9089
Fig. 3 - Differential Forward Resistance vs. Forward Current
PACKAGE DIMENSIONS in millimeters (inches): MiniMELF (SOD-80)
1.6 (0.063)
1.4 (0.055)
Cathode indentification
*
0.47 (0.019) max.
3.7 (0.146)
3.3 (0.130)
* The gap between plug and glass can
be either on cathode or anode side
2.5 (0.098) max.
1.25 (0.49) min.
2 (0.079) min.
Foot print recommendation:
5 (0.197) ref.
Document no.:6.560-5005.01-4
Rev. 8 - Date: 07.June.2006
96 12070
Rev. 1.9, 26-Nov-2021
Document Number: 85542
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000