DBZ55135WP10136CB1

DB 055135 HQ, DBZ 055135 HQ www.vishay.com Vishay Draloric RF Power Feed-Through Capacitors with Conductor Rod, Class 1, R16 HQ Ceramic Dielectric FEATURES • High voltage ratings • High feed-through currents • Two different versions of the outer electrode terminal APPLICATIONS These capacitors feature a Q-factor greater than 10 000 which makes it well suited in operating frequency range from 0.1 MHz up to 30 MHz where high voltages and currents are present. CAPACITANCE RANGE 100 pF CAPACITANCE TOLERANCE QUICK REFERENCE DATA ± 10 % DESCRIPTION VALUE Ceramic Class 1 Ceramic Dielectric Type DB 055135 Voltage (Vp) R16 High Q (TCC + 100 ppm/K) DBZ 055135 20 000 Min. Capacitance (pF) 100 Max. Capacitance (pF) 100 Mounting CERAMIC DIELECTRICS R16 HQ Screw terminal MATERIAL Capacitor elements made from class 1 ceramic dielectric with noble metal electrodes. Connection terminals: made from copper / brass, silver plated RATED VOLTAGE 20 kVp DIELECTRIC STRENGTH TEST 200 % of rated AC voltage (50 Hz, 5 minutes) RF POWER TEST 114 % of rated power, for 5 minutes in a test generator circuit DISSIPATION FACTOR FINISH Max. 0.025 % (1 MHz) Capacitor body completely protective lacquered. The contoured insulating rims are additionally glazed. INSULATION RESISTANCE MARKING Type designator, capacitance value and tolerance, rated peak voltage, ceramic material code, production date code, manufacturer logo Min. 100 000 M (at 25 °C) OPERATING TEMPERATURE RANGE -55 °C to +100 °C ACCESSORIES ADDED All feed-through capacitors are supplied with the necessary nuts and washers to make the connection to the conductor rod. Revision: 02-Sep-15 Document Number: 22148 1 For technical questions, contact: powcap@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DB 055135 HQ, DBZ 055135 HQ www.vishay.com Vishay Draloric SAP PART NUMBER AND ELECTRICAL DATA PART NUMBER CERAMIC CAP. VALUES (pF) RATED VOLTAGE (kVP) RATED POWER (1) (kvar) RATED CURRENT (ARMS) FEED-THROUGH CURRENT (2) (A) R16 HQ 100 20.0 Max. 900.0 150.0 80.0 R16 HQ 100 20.0 Max. 900.0 150.0 80.0 TYPE DB 055135 DB055135WP10136CB1 TYPE DBZ 055135 DBZ55135WP10136CB1 Notes (1) The surface temperature during operation must not exceed +100 °C (2) DC or low frequency RMS current (< 20 kHz) DIMENSIONS in millimeters (inches) DB 055135 Ø 82 (3.23 Dia.) Ø 75 (2.95 Dia.) 4±1 (0.16 ± 0.04) 25 ± 1 (0.98 ± 0.04) + 0.08 - 0.04) +2 -1 150 65 ± 2 (2.56 ± 0.08) 2 (0.08) (5.91 Ø 55 (2.17 Dia.) 173 ± 2 (6.88 ± 0.08) 1 (0.04) 135 ± 2 (5.31 ± 0.08) M10 Thread (both ends) 62 ± 2 (2.44 ± 0.08) 135 ± 2 (5.31 ± 0.08) DBZ 055135 SW 17 (0.67 HEX) SW 17 (0.67 HEX) M10 Thread (both ends) 25 ± 1 (0.98 ± 0.04) 60° Revision: 02-Sep-15 165.0 ± 1.5 (6.496 ± 0.059) 135.0 ± 1.5 (5.315 ± 0.059) 60° Ø 100.0 ± 0.5 (3.937 ± 0.020 Dia.) Ø 86.0 ± 0.5 (3.386 ± 0.020 Dia.) Ø 9.5 + 0.3 (0.374 + 0.012 Dia.) Ø 5.5 + 0.2 (0.217 + 0.008 Dia.) Document Number: 22148 2 For technical questions, contact: powcap@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DB 055135 HQ, DBZ 055135 HQ www.vishay.com Vishay Draloric MOUNTING GUIDELINES • The connection to one electrode must be flexible in order to prevent the generation of physical force which could damage the capacitor elements. Such forces are often generated by the dimensional differences resulting from the normal physical tolerances of these components. • The capacitor elements must not be used as a mechanical support for other devices or components. • Use two wrenches when tightening the nuts on both sides of the conductor rod. The outer electrode terminal flange of these feed-through capacitors components should be fixed after tightening the inner electrode’s connection. • Make sure that not too much force applied to the solder connections between hardware and noble metal electrode. A torque less than 5 Nm is recommended. DERATING DIAGRAM DB055135WP10136CB1, DBZ55135WP10136CB1 7.16 MHz Ug (kVp) 100 Ig (ARMS) Qg (kvar) 1000 39.8 MHz Ug 10 100 Qg 1 10 Ig 0.1 1 10 100 1 1000 Frequency (MHz) RELATED DOCUMENTS General Information Revision: 02-Sep-15 www.vishay.com/doc?22071 Document Number: 22148 3 For technical questions, contact: powcap@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 09-Jul-2021 1 Document Number: 91000