DG506B, DG507B
Vishay Siliconix
Precision 16-Channel/Dual 8-Channel CMOS Analog Multiplexers
DESCRIPTION
FEATURES
The DG506B and DG507B are high performance analog
multiplexers. Their ultra-low switch charge injection, low
channel capacitance, and low leakage level allows them to
achieve superior switching performance. The DG506B is a
16-channel single-ended analog multiplexer designed to
connect one of sixteen inputs to a common output as
determined by a 4-bit binary address (A0, A1, A2, A3). The
DG507B is a dual 8-channel differential analog multiplexer
designed to connect one of eight differential inputs to a
common dual output as determined by its 3-bit binary
address (A0, A1, A2). Break-before-make switching action
protects against momentary crosstalk between adjacent
channels.
• Operate with single or dual power supply
An on channel conducts current equally well in both
directions. In the off state each channel blocks voltages up to
the power supply rails. An enable (EN) function allows the
user to reset the multiplexer/demultiplexer to all switches off
for stacking several devices. All control inputs, addresses
(Ax) and enable (EN) are TTL compatible over the full
specified operating temperature range.
• Superior alternative to:
- ADG506A, DG506A, HI-506
- ADG507A, DG507A, HI-507
• V+ to V- analog signal swing range
• 44 V power supply maximum rating
• Extended operate temperature range:
-40 °C to +125 °C
• Low leakage typically < 3 pA
• Low charge injection - QINJ = 1 pC
• Low power - ISUPPLY: 5 µA
• TTL compatible logic
• > 250 mA latch up current per JESD78
• Available in SOIC28 and TSSOP28 packages
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
BENEFITS
The DG506B and DG507B are fabricated on an enhanced
SG-II CMOS process that achieves improved performance
on: reduced charge injection, lower device leakage, and
minimized parasitic capacitance.
• Reduced switching errors
As the DG506, DG507 has a long history in the industry with
many suppliers offering copies, and in some cases improved
variations, with the best in class improvements, the Vishay
Siliconix new version of the DG506B, DG507B are the
superior alternatives to what is currently available.
• Reduced power consumption
Applications for the DG506B, DG507B include high speed
and high precision data acquisition, audio signal switching
and routing, ATE systems, and avionics. High performance
and low power dissipation make them ideal for battery
operated and remote instrumentation applications.
• Reduced glitching
• Improved data throughput
• Increased ruggedness
• Wide supply ranges (± 5 V to ± 20 V)
APPLICATIONS
• Data acquisition systems
• Audio and video signal routing
• ATE systems
• Medical instrumentation
The DG506B and DG507B have the absolute maximum
voltage rating extended to 44 V. Additionally, single supply
operation is also allowed. An epitaxial layer prevents
latch-up.
The DG506B and DG507B are both available in 28-lead
SOIC and TSSOP package options with extended
temperature range of -40 °C to +125 °C.
For more information, refer to Vishay Siliconix DG506B,
DG507B evaluation board note.
Document Number: 65150
S13-2567-Rev. C, 16-Dec-13
For technical questions, contact: analogswitchtechsupport@vishay.com
www.vishay.com
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG506B, DG507B
Vishay Siliconix
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG506B
Dual-In-Line
SOIC and TSSOP
DG507B
Dual-In-Line
SOIC and TSSOP
V+
1
28 D
V+
1
28 Da
NC
2
27 V-
Db
2
27 V-
NC
3
26 S8
NC
3
26 S8a
S16
4
25 S7
S8b
4
25 S7a
S15
5
24 S6
S7b
5
24 S6a
S14
6
23 S5
S6b
6
23 S5a
S13
7
22 S4
S5b
7
22 S4a
S12
8
21 S3
S4b
8
21 S3a
S11
9
20 S2
S3b
9
20 S2a
S10 10
19 S1
S2b 10
19 S1a
S9 11
18 EN
S1b 11
17 A0
GND 12
NC 13
16 A1
NC 13
16 A1
A3 14
15 A2
NC 14
15 A2
18 EN
Da
S 8a
V+
28 27 26
Db
1
NC
2
S8
D
3
V-
V+
DG507B
PLCC
NC
DG506B
PLCC
NC
Top View
S 16
Top View
4
17 A0
Decoders/Drivers
4
3
2
1
28 27 26
V-
Decoders/Drivers
S 8b
GND 12
25
S7
S7b
5
25
S7a
6
24
S6
S6b
6
24
S6a
S13
7
23
S5
S5b
7
23
S5a
S12
8
22
S4
S4b
8
22
S4a
S11
9
21
S3
S3b
9
21
S3a
S10
10
20
S2
S2b
10
20
S2a
S1
S1b
11
19
S1a
11
19
Top V iew
www.vishay.com
2
EN
A0
A1
A2
NC
NC
GND
EN
12 13 14 15 16 17 18
A0
12 13 14 15 16 17 18
A1
Decoders/Drivers
A2
Decoders/Drivers
GND
S9
5
A3
S14
NC
S15
Top V iew
For technical questions, contact: analogswitchtechsupport@vishay.com
Document Number: 65150
S13-2567-Rev. C, 16-Dec-13
This document is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG506B, DG507B
Vishay Siliconix
TRUTH TABLE DG506B
TRUTH TABLE DG507B
A3
A2
A1
A0
EN
On Switch
A2
A1
A0
EN
On Switch
X
X
X
X
0
None
X
X
X
0
None
1
0
0
0
1
1
2
0
0
1
1
2
0
1
0
1
3
0
1
1
1
4
1
0
0
1
5
1
0
1
1
6
0
0
0
0
0
0
0
1
1
1
0
0
1
0
1
3
0
0
1
1
1
4
0
1
0
0
1
5
0
1
0
1
1
6
1
1
0
1
7
0
1
1
0
1
7
1
1
1
1
8
1
1
1
1
1
8
1
0
0
0
1
9
1
0
0
1
1
10
1
0
1
0
1
11
1
0
1
1
1
12
1
1
0
0
1
13
1
1
0
1
1
14
1
1
1
0
1
15
1
1
1
1
1
16
ORDERING INFORMATION DG506B
Temp. Range
-40 °C to 125 °C
Package
Part Number
28-Pin SOIC
DG506BEW-T1-GE3
28-Pin TSSOP
DG506BEQ-T1-GE3
28-Pin PLCC
DG506BEN-T1-GE3
Logic “0” = VIL 0.8 V
Logic “1” = VIH 2.4 V
X = Do not care
ORDERING INFORMATION DG507B
Temp. Range
-40 °C to 125 °C
Package
Part Number
28-Pin SOIC
DG507BEW-T1-GE3
28-Pin TSSOP
DG507BEQ-T1-GE3
28-Pin PLCC
DG507BEN-T1-GE3
ABSOLUTE MAXIMUM RATINGS
Parameter
Limit
Voltages Referenced to V-
V+
GND
25
(V-) - 2 to (V+) + 2
or 20 mA, whichever occurs first
Digital Inputsa, VS, VD
Current (Any terminal)
30
Peak Current, S or D (Pulsed at 1 ms, 10 % duty cycle max.)
100
Storage Temperature
(EW, EQ, EN suffix)
28-Pin Wide Body SOICc
Power Dissipation (Packages)b
Thermal Resistance (J-A
)b
Unit
44
-65 to 150
V
mA
°C
840
28-Pin TSSOPd
817
28-Pin PLCCe
1693
28-Pin Wide Body SOICc
95.3
28-Pin TSSOPd
97.9
28-Pin PLCCe
47.3
mW
°C/W
Notes:
a. Signals on SX, DX or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads soldered or welded to PC board.
c. Derate 10.5 mW/°C above 70 °C.
d. Derate 10.2 mW/°C above 70 °C.
e. Derate 21.2 mW/°C above 70 °C.
Document Number: 65150
S13-2567-Rev. C, 16-Dec-13
For technical questions, contact: analogswitchtechsupport@vishay.com
www.vishay.com
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG506B, DG507B
Vishay Siliconix
SPECIFICATIONS
Parameter
Symbol
Analog Switch
Analog Signal Rangee
VANALOG
Drain-Source
On-Resistance
RDS(on) Matching
Source Off Leakage Current
Test Conditions
Unless Otherwise Specified
V+ = 15 V, V- = - 15 V (± 10 %)
VAX, VEN = 2.4 V, 0.8 Va
RDS(on)
VD = ± 10 V, IS = - 1 mA
RDS(on)
VD = ± 10 V
IS(off)
ID(off)
VD = ± 10 V
VS = 10 V
VEN = 0 V
VS = VD = 10 V
sequence each
switch on
±
ID(on)
Typ.c
Room
DG506B
DG506B
DG507B
Min.d
-15
170
Full
Room
10
Room
0.005
Full
DG507B
Drain On Leakage Current
Temp.b
Full
±
Drain Off Leakage Current
A Suffix
-40 °C to 125 °C
Room
0.005
Full
Room
0.005
Full
Room
0.005
Full
Room
Max.d
Min.d
15
-15
Max.d
Unit
15
V
300
300
400
400
-1
1
-1
1
-50
50
-50
50
-1
1
-1
1
-100
100
-100
100
-1
1
-1
1
-50
50
-50
50
-1
1
-1
1
-100
100
-100
100
-1
1
-1
1
Full
-50
50
-50
50
2.4
Digital Control
Logic High Input Voltage
VINH
Full
Logic Low Input Voltage
VINL
Full
0.005
D Suffix
-40 °C to 85 °C
2.4
0.8
0.8
Logic High Input Current
IIH
VAX, VEN = 2.4 V
Full
-1
1
-1
1
Logic Low Input Current
IIL
VAX, VEN = 0.8 V
Full
-1
1
-1
1
Logic Input Capacitancee
Cin
f = 1 MHz
Room
5
Room
190
tTRANS
VS1 = +10 V/-10 V,
VS16 = -10 V/+10 V,
RL = 1 M, CL = 35 pF
see figure 2
VS1 = VS16 = 5.0 V, CL = 35 pF,
RL = 1 k, see figure 4
Room
nA
V
µA
pF
Dynamic Characteristics
Transition Time
Break-Before-Make Interval
tOPEN
Enable Turn-On Time
tON(EN)
Enable Turn-Off Time
Charge Injectione
Off Isolatione
Crosstalke
- 3 dB Bandwidthe
Total Harmonic Distortione
tOFF(EN)
QINJ
CL = 1 nF, RGEN = 0 , VGEN = 0 V
OIRR
CL = 5 pF, RL = 50
f = 1 MHz
DG506B
XTALK
CL = 5 pF, RL = 50
f = 1 MHz
DG506B
RL = 50
DG506B
THD
Source Off Capacitancee
CS(off)
Drain Off Capacitancee
CD(off)
Drain On Capacitancee
CD(on)
84
Full
Room
VS1 = 5 V, VS2 to VS16 = 0 V,
RL = 1 k, CL = 35 pF
see figure 3
BW
Full
DG507B
DG507B
DG507B
RL = 10 k, 5 Vrms
f = 1 MHz
Room
Room
Room
360
360
30
10
10
151
250
53
Full
Full
300
30
Full
Room
300
ns
250
310
310
200
200
220
220
1
pC
- 85
- 84
dB
- 85
- 84
114
MHz
217
Room
0.04
Room
3
DG506B
Room
31
DG507B
Room
17
DG506B
Room
38
DG507B
Room
24
Room
0.005
%
pF
Power Supply
Positive Supply Current
I+
Negative Supply Current
I-
www.vishay.com
4
VAX, VEN = 0 V or 5 V
Full
Full
-1
For technical questions, contact: analogswitchtechsupport@vishay.com
0.1
0.1
0.1
0.1
-1
mA
µA
Document Number: 65150
S13-2567-Rev. C, 16-Dec-13
This document is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG506B, DG507B
Vishay Siliconix
SPECIFICATIONS Single Supply 12 V
Parameter
Symbol
Test Conditions
Unless Otherwise Specified
V+ = 12 V, V- = 0 V (± 10 %)
VAX, VEN = 2.4 V, 0.8 Va
A Suffix
-40 °C to 125 °C
Temp.b
Typ.c
Min.d
D Suffix
-40 °C to 85 °C
Max.d
Min.d
12
0
Max.d
Unit
12
V
Analog Switch
Analog Signal Rangee
On-Resistance
RDS(on) Matching
VANALOG
RDS(on)
Full
Room
VD = 10 V/0 V, IS = 1 mA
RDS(on)
IS(off)
Switch Off Leakage Current
ID(off)
V+ = 12 V, V- = 0 V
VD = 0 V/10 V,
VS = 10 V/0 V
DG506B
DG507B
DG506B
ID(on)
Full
Room
10
Room
0.005
Full
ID(off)
Channel On Leakage Current
0
270
V+ = 12 V, V- = 0 V
VS = VD = 0 V/10 V
DG507B
Room
0.005
Full
Room
0.005
Full
Room
0.005
Full
Room
0.005
450
450
650
650
-1
1
-1
1
-50
-50
-50
50
-1
1
-1
1
-100
100
-100
100
-1
1
-1
1
-50
50
-50
50
-1
1
-1
1
-100
100
-100
100
-1
1
-1
1
Full
-50
50
-50
50
2.4
nA
Digital Control
Logic High Input Voltage
VINH
Full
2.4
Logic Low Input Voltage
VINL
Full
Logic High Input Current
IIH
VAX, VEN = 2.4 V
Full
-1
1
-1
1
Logic Low Input Current
IIL
VAX, VEN = 0.8 V
Full
-1
1
-1
1
Logic Input Capacitancee
Cin
f = 1 MHz
Room
5
tTRANS
VS1 = 10 V/0 V, VS16 = 0 V/10 V,
RL = 1 M, CL = 35 pF, see figure 2
Room
228
VS1 = VS16 = 5 V, CL = 35 pF,
RL = 1 k, see figure 4
Room
0.8
0.8
V
µA
pF
Dynamic Characteristics
Transition Time
Break-Before-Make Interval
Enable Turn-On Time
Enable Turn-Off Time
tOPEN
tON(EN)
tOFF(EN)
QINJ
Off Isolatione
OIRR
CL = 5 pF, RL = 50
f = 1 MHz
DG506B
XTALK
CL = 5 pF, RL = 50
f = 1 MHz
DG506B
- 3 dB Bandwidthe
BW
RL = 50
Total Harmonic Distortione
THD
RL = 10 k, 5 VRMS,
f = 20 Hz to 20 kHz
Document Number: 65150
S13-2567-Rev. C, 16-Dec-13
Full
40
DG507B
DG507B
DG506B
DG507B
Full
Room
Room
Room
Room
450
40
10
10
197
300
420
420
46
200
200
220
220
Full
Room
380
450
115
Full
CL = 1 nF, RGEN = 0 , VGEN = 0 V
Charge Injectione
Crosstalke
Full
Room
VS1 = 5 V, VS2 to VS16 = 0 V,
RL = 1 k, CL = 35 pF
see figure 3
380
4
300
ns
pC
-86
-84
-85
dB
-84
104
191
0.23
For technical questions, contact: analogswitchtechsupport@vishay.com
MHz
%
www.vishay.com
5
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG506B, DG507B
Vishay Siliconix
SPECIFICATIONS Single Supply 12 V
Parameter
Test Conditions
Unless Otherwise Specified
V+ = 12 V, V- = 0 V (± 10 %)
VAX, VEN = 2.4 V, 0.8 Va
Symbol
A Suffix
-40 °C to 125 °C
Temp.b Typ.c
Min.d
Max.d
D Suffix
-40 °C to 85 °C
Min.d
Max.d
Unit
Dynamic Characteristics
Source Off Capacitancee
CS(off)
Drain Off Capacitancee
CD(off)
Channel On Capacitancee
CD(on)
4
DG506B
f = 1 MHz
DG507B
37
Room
pF
20
DG506B
43
DG507B
26
Power Supply
Power Supply Current
I+
Room
VAX, VEN = 0 V, or 5 V
0.005
Full
0.1
0.1
0.1
0.1
mA
Notes:
a. VAX, VEN = input voltage perform proper function.
b. Room = 25 °C, Full = as determined by the operating temperature suffix.
c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet.
e. Guaranteed by design, not subject to production test.
f. RDS(on) = RDS(on) max. - RDS(on) min.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
SCHEMATIC DIAGRAM Typical Channel
V+
VREF
GND
VD
VA0
AX
Level
Shift
Decode/
Drive
V+
V-
S1
EN
Sn
V-
Figure 1.
www.vishay.com
6
For technical questions, contact: analogswitchtechsupport@vishay.com
Document Number: 65150
S13-2567-Rev. C, 16-Dec-13
This document is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG506B, DG507B
Vishay Siliconix
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
500
500
T = 25 °C
IS = 1 mA
V+ = + 5.0 V
V- = - 5.0 V
RON - On-Resistance (Ω)
400
350
V+ = + 15 V
V- = - 15 V
300
V+ = + 10.8 V
V- = - 10.8 V
250
200
150
V+ = 10.8 V
400
350
V+ = 12 V
300
250
200
V+ = 20 V
150
100
V+ = + 13.5 V
V- = - 13.5 V
V+ = + 20 V
V- = - 20 V
50
0
- 20
100
50
- 15
- 10
-5
0
5
10
15
20
0
2
4
6
8
10
12
14
16
18
20
VD - Analog Voltage (V)
VD - Analog Voltage (V)
On-Resistance vs. VD and Dual Supply Voltage
On-Resistance vs. VD and Single Supply Voltage
700
500
+ 125 °C
+ 85 °C
+ 25 °C
- 40 °C
V+ = + 5.0 V, V- = - 5.0 V
IS = 1 mA
450
V+ = + 10.8 V, V- = - 10.8 V
IS = 1 mA
+ 125 °C
+ 85 °C
+ 25 °C
- 40 °C
400
RON - On-Resistance (Ω)
600
RON - On-Resistance (Ω)
T = 25 °C
IS = 1 mA
450
RON - On-Resistance (Ω)
450
500
400
300
200
350
300
250
200
150
100
100
50
0
-5
-4
-3
-2
-1
0
1
2
3
4
0
- 15
5
- 10
VD - Analog Voltage (V)
10
15
500
V+ = + 13.5 V, V- = - 13.5 V
IS = 1 mA
+ 125 °C
+ 85 °C
+ 25 °C
- 40 °C
450
350
300
250
200
150
300
250
200
150
100
50
50
-5
0
5
10
VD - Analog Voltage (V)
On-Resistance vs. Analog Voltage
and Temperature
Document Number: 65150
S13-2567-Rev. C, 16-Dec-13
+ 125 °C
+ 85 °C
+ 25 °C
- 40 °C
350
100
- 10
V+ = + 15 V, V- = - 15 V
IS = 1 mA
400
RON - On-Resistance (Ω)
400
RON - On-Resistance (Ω)
5
On-Resistance vs. Analog Voltage
and Temperature
500
0
- 15
0
VD - Analog Voltage (V)
On-Resistance vs. Analog Voltage
and Temperature
450
-5
15
0
- 15
- 10
-5
0
5
10
15
VD - Analog Voltage (V)
On-Resistance vs. Analog Voltage
and Temperature
For technical questions, contact: analogswitchtechsupport@vishay.com
www.vishay.com
7
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG506B, DG507B
Vishay Siliconix
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
500
700
V+ = + 20 V, V- = - 20 V
IS = 1 mA
RON - On-Resistance (Ω)
350
550
300
250
200
150
450
400
350
300
250
200
100
50
50
0
- 20
0
- 15
- 10
-5
0
5
10
15
20
0
1
2
3
4
5
6
7
8
9
10 11 12
VD - Analog Voltage (V)
VD - Analog Voltage (V)
On-Resistance vs. Analog Voltage
and Temperature
On-Resistance vs. Analog Voltage
and Temperature
500
700
600
550
500
450
400
350
300
250
200
+ 125 °C
+ 85 °C
+ 25 °C
- 40 °C
V+ = + 20 V, V- = 0 V
IS = 1 mA
450
400
RON - On-Resistance (Ω)
+ 125 °C
+ 85 °C
+ 25 °C
- 40 °C
V+ = + 12 V, V- = 0 V
IS = 1 mA
650
RON - On-Resistance (Ω)
500
150
100
150
350
300
250
200
150
100
100
50
50
0
0
0
1
2
3
4
5
6
7
8
9
0
10 11 12
2
4
6
8
10
12
14
16
VD - Analog Voltage (V)
VD - Analog Voltage (V)
On-Resistance vs. Analog Voltage
and Temperature
On-Resistance vs. Analog Voltage
and Temperature
10 000
100
1000
80
18
20
V± = ± 15 V
T = 25 °C
60
I+
10
Leakage Current (pA)
100
Supply Current (µA)
+ 125 °C
+ 85 °C
+ 25 °C
- 40 °C
V+ = + 10.8 V, V- = 0 V
IS = 1 mA
600
+ 125 °C
+ 85 °C
+ 25 °C
- 40 °C
400
RON - On-Resistance (Ω)
450
650
IGND
1
0.1
I-
0.01
0.0001
10
100
1K
10K
100K
1M
IS(OFF)
ID(ON)
20
0
- 20
ID(OFF)
- 40
- 60
V+ = + 15 V
V- = - 15 V
0.001
40
- 80
10M
- 100
- 15
- 10
-5
0
5
10
Input Switching Frequency (Hz)
VD - Analog Voltage (V)
Supply Current vs. Input Switching Frequency
Leakage Current vs. Analog Voltage
www.vishay.com
8
For technical questions, contact: analogswitchtechsupport@vishay.com
15
Document Number: 65150
S13-2567-Rev. C, 16-Dec-13
This document is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG506B, DG507B
Vishay Siliconix
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
10 000
2.50
V+ = + 15 V
V- = - 15 V
2.25
Switching Threshold (V)
Leakage Currrent (pA)
1000
ID(OFF)
100
ID(ON)
10
IS(OFF)
2.00
1.75
1.50
1.25
1.00
1
0.75
0.1
- 60 - 40 - 20
0.50
0
20
40
60
80
100 120 140
2
6
10
14
18
22
26
30
Temperature (ºC)
V+ - Supply Voltage
Leakage Current vs. Temperature
Switching Threshold vs. Single Supply V
0
0
DG507B
DG506B
- 10
- 10
Loss
Loss
- 40
- 20
V+ = + 15 V
V- = - 15 V
RL = 50
- 50
Loss, OIRR, XTALK (dB)
Loss, OIRR, XTALK (dB)
- 20
- 30
OIRR
- 60
- 70
XTALK
(adjacent)
- 80
- 90
- 30
- 40
V+ = + 15 V
V- = - 15 V
RL = 50
- 50
OIRR
- 60
- 70
XTALK
(adjacent)
- 80
- 90
XTALK
(non-adjacent)
- 100
- 110
100K
1M
10M
XTALK
(non-adjacent)
- 100
100M
- 110
100K
1G
1M
Frequency (Hz)
10M
100M
Insertion Loss, Off-Isolation, Crosstalk vs. Frequency
0
0
DG506B
DG507B
- 10
- 10
Loss
V+ = + 12 V
V- = 0 V
RL = 50
- 50
OIRR
- 60
- 70
XTALK
(adjacent)
- 80
- 90
- 30
- 40
V+ = + 12 V
V- = 0 V
RL = 50
- 50
OIRR
- 60
- 70
XTALK
(adjacent)
- 80
- 90
XTALK
(non-adjacent)
- 100
- 110
100K
Loss
- 20
Loss, OIRR, XTALK (dB)
Loss, OIRR, XTALK (dB)
- 20
- 40
1G
Frequency (Hz)
Insertion Loss, Off-Isolation, Crosstalk vs. Frequency
- 30
34
1M
10M
100M
1G
Frequency (Hz)
Insertion Loss, Off-Isolation, Crosstalk vs. Frequency
Document Number: 65150
S13-2567-Rev. C, 16-Dec-13
XTALK
(non-adjacent)
- 100
- 110
100K
1M
10M
100M
1G
Frequency (Hz)
Insertion Loss, Off-Isolation, Crosstalk vs. Frequency
For technical questions, contact: analogswitchtechsupport@vishay.com
www.vishay.com
9
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG506B, DG507B
Vishay Siliconix
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
15
15
DG506B
T = 25 °C
DG507B
T = 25 °C
10
QINJ - Charge Injection (pC)
QINJ - Charge Injection (pC)
10
V+ = + 15 V
V- = - 15 V
5
0
V+ = + 12 V
V- = 0 V
-5
- 10
- 15
- 10
-5
0
5
10
15
0
V+ = + 12 V
V- = 0 V
-5
- 15
- 20
20
- 15
- 10
-5
0
5
10
15
VS - Analog Voltage (V)
VS - Analog Voltage (V)
Charge Injection vs. Analog Voltage
Charge Injection vs. Analog Voltage
20
35
60
DG506B
V± = ± 15 V
T = 25 °C
55
50
DG507B
V± = ± 15 V
T = 25 °C
30
45
CD(on)/CS(on)
CD(on)/CS(on)
25
40
Capacitance (pF)
Capacitance (pF)
V+ = + 15 V
V- = - 15 V
- 10
- 15
- 20
35
30
CD(off)
25
20
20
CD(off)
15
10
15
10
0
- 15
- 10
CS(off)
5
CS(off)
5
-5
0
5
10
0
- 15
15
- 10
-5
0
5
10
VANALOG (V)
VANALOG (V)
Capacitance vs. VANALOG
Capacitance vs. VANALOG
60
15
35
DG506B
V+ = + 12 V
T = 25 °C
55
50
DG507B
V+ = + 12 V
T = 25 °C
30
CD(on)/CS(on)
CD(on)/CS(on)
45
25
40
35
Capacitance (pF)
Capacitance (pF)
5
CD(off)
30
25
20
CD(off)
20
15
10
15
10
CS(off)
5
CS(off)
5
0
0
0
www.vishay.com
10
1
2
3
4
5
6
7
8
9
10 11 12
0
1
2
3
4
5
6
7
8
9
VANALOG (V)
VANALOG (V)
Capacitance vs. VANALOG
Capacitance vs. VANALOG
For technical questions, contact: analogswitchtechsupport@vishay.com
10 11 12
Document Number: 65150
S13-2567-Rev. C, 16-Dec-13
This document is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG506B, DG507B
Vishay Siliconix
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
10
RL = 10 k
VSignal = 5 VRMS
THD (%)
1
V = + 12 V
0.1
V = ± 15 V
0.01
10
100
1000
10 000
100 000
Frequency (Hz)
THD vs. Frequency
TEST CIRCUITS
+ 15 V
A3
A2
V+
S1
A1
50
± 10 V
S2 - S7
A0
DG506B S16
EN
GND
+ 3.0 V
± 10 V
VO
D
V-
Logic
Input
50 %
0V
35 pF
1 M
tr < 20 ns
tf < 20 ns
3V
- 15 V
VS1
+ 15 V
VO
A2
A1
A0
50
0V
V+
± 10 V
S1b
90 %
VS16
S1a - S4a, Da
DG507B S8b
GND
tTRANS
tTRANS
± 10 V
S1 ON
S16 ON
VO
Db
EN
+ 3.0 V
90 %
Switch
Output
V1 M
35 pF
- 15 V
Figure 2. Transition Time
Document Number: 65150
S13-2567-Rev. C, 16-Dec-13
For technical questions, contact: analogswitchtechsupport@vishay.com
www.vishay.com
11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG506B, DG507B
Vishay Siliconix
TEST CIRCUITS
+ 15 V
V+
S1
5V
EN
S2 - S16
A0
DG506B
A1
A2
A3
50 Ω
D
V-
GND
VO
Logic
Input
50 %
0V
35 pF
1 kΩ
tr < 20 ns
tf < 20 ns
3V
tON(EN)
- 15 V
VO
+ 15 V
VO
S1b
5V
0V
EN
S1a - S8a, Da
S2b - S8b
A0
50 Ω
90 %
90 %
Switch
Output
V+
A1
A2
tOFF(EN)
DG507B
Db
VO
V-
GND
35 pF
1 kΩ
- 15 V
Figure 3. Enable Switching Time
+ 15 V
V+
EN
+ 3.0 V
Logic
Input
All S and Da
+5V
tr < 20 ns
tf < 20 ns
3V
50 %
0V
A0
DG506B
DG507B
A1
A2
A3
50
GND
Db, D
VO
VO
V-
80 %
Switch
Output
- 15 V
1 k
35 pF
VO
0V
tOPEN
Figure 4. Break-Before-Make Interval
www.vishay.com
12
For technical questions, contact: analogswitchtechsupport@vishay.com
Document Number: 65150
S13-2567-Rev. C, 16-Dec-13
This document is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG506B, DG507B
Vishay Siliconix
TEST CIRCUITS
+ 15 V
Rg
V+
SX
Logic
Input
EN
OFF
ON
OFF
0V
A0
Channel
Select
3V
VO
D
CL
1 nF
AX
GND
ΔVO
Switch
Output
V-
ΔVO is the measured voltage due to charge transfer
error Q, when the channel turns off.
QINJ = CL x ΔVO
- 15 V
Figure 5. Charge Injection
+ 15 V
+ 15 V
VIN
Rg = 50 Ω
VIN
VS
V+
S1
VS
SX
VOUT
S16
A0
D
VOUT
AX
GND
Rg = 50 Ω
S16
A0
RL
50 Ω
RL
50 Ω
V-
EN
V+
S1
D
AX
GND
3V
EN
RL
50 Ω
V-
- 15 V
3V
VOUT
Off Isolation = 20 log
VIN
- 15 V
Crosstalk = 20 log
VOUT
VIN
Figure 6. Off Isolation
Figure 7. Crosstalk
+ 15 V
+ 15 V
VS
VIN
V+
S1
V+
Rg = 50 Ω
S1
Meter
A0
A0
D
AX
GND
EN
V-
VO
Channel
Select
AX
RL
50 Ω
D
GND
3V
- 15 V
Insertion Loss = 20 log
VOUT
VIN
Figure 8. Insertion Loss
Impedance
Analyzer
or Equivalent
S8
EN
0V
or
3V
f = 1 MHz
V- 15 V
Figure 9. Source Drain Capacitance
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?65150.
Document Number: 65150
S13-2567-Rev. C, 16-Dec-13
For technical questions, contact: analogswitchtechsupport@vishay.com
www.vishay.com
13
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
Vishay Siliconix
TSSOP:
28ĆLEAD
All Corner R0.1 (max)
R0.1–0.15
4_"2_
0.127 Typ.
Pin 1 Indicator
O0.70x0.038"0.012 DP
Surface Polished
0.735
6.400"0.050
4.400"0.025
5_–8_ Typ.
R0.1–0.15
0.600"0.050
1.00"0.050
Detail A
0.686"0.050
0.625
9.70"0.025
1.016"0.025
5.05"0.050
0.28 Typ.
0.65 Typ.
0.050
0.1 (Ref)
0.457"0.020
0.432"0.020
12_ (8X)
Detail A
NOTES:
1. Package Surface: Shiny Finish (Ro 0.15 – 0.20).
ECN: S-03946—Rev. C, 09-Jul-01
DWG: 5851
Document Number: 71202
06-Jul-01
2.
Package Warpage: 0.012 (max).
3.
Package Corner Radius: R0.1 mm (max).
4.
Top to BTM Cavity Mismatch: 0.037 (max).
5.
Tolerance: "0.050 unless otherwise specified.
6.
End Flash Max: 0.1016 mm.
www.vishay.com
1
Package Information
Vishay Siliconix
PLCC: 28-LEAD
D-SQUARE
MILLIMETERS
MIN.
MAX.
A
4.20
4.57
2.29
3.04
A1
0.51
A2
B
0.331
0.553
0.661
0.812
B1
D
12.32
12.57
11.430
11.582
D1
9.91
10.92
D2
1.27 BSC
e1
ECN: T09-0766-Rev. D, 28-Sep-09
DWG: 5491
DIM.
A2
INCHES
MIN.
MAX.
0.165
0.180
0.090
0.120
0.020
0.013
0.021
0.026
0.032
0.485
0.495
0.450
0.456
0.390
0.430
0.050 BSC
e1
B1
D2
B
D1-SQUARE
A1
D
A
Document Number: 71264
28-Sep-09
0.101 mm
0.004"
www.vishay.com
1
Package Information
www.vishay.com
Vishay Siliconix
SOIC (WIDE-BODY): 28-LEADS
0.06 0.002D
CAVITY NO.
0.3525 0.001
0.334 0.005
28 27
26 25 24 23 22 21
20 19
18
R0.004
17 16 15
0.010
0.1475 0.001
R0.008
0.295 0.001
R0.009
1
2 3
4
5
6
7
8
9
10
11
12 13 14
4°
R0.004
2°
0.032 0.005
0.070 0.005
0.055 0.005
DETAIL A
PIN 1 INDICATOR
0.047 0.007 0.001 dp
SURFACE POLISHED
0.334 0.005
0.291 0.001
0.091 0.001
0.020 45°
0.705 0.001
0.098 0.002
R0.004
0.00825 ± 0.00325
0.041 0.001
0.050 TYP.
0.017 0.0003
7°(4 )
0.295 0.001
0.406 0.004
DETAIL A
All Dimensions In Inches
ECN: E11-2209-Rev. D, 01-Aug-11
DWG: 5850
Revision: 01-Aug-11
1
Document Number: 71268
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
工商网监
湘ICP备2023018690号
