HFA08TB60
Vishay High Power Products
HEXFRED®
Ultrafast Soft Recovery Diode, 8 A
FEATURES
•
•
•
•
•
•
Base
cathode
2
1
Cathode
Ultrafast recovery
Ultrasoft recovery
Very low IRRM
Very low Qrr
Specified at operating conditions
Designed and qualified for industrial level
BENEFITS
•
•
•
•
•
3
Anode
Reduced RFI and EMI
Reduced power loss in diode and switching transistor
Higher frequency operation
Reduced snubbing
Reduced parts count
DESCRIPTION
HFA08TB60 is a state of the art ultrafast recovery diode.
Employing the latest in epitaxial construction and advanced
processing techniques it features a superb combination of
characteristics which result in performance which is
unsurpassed by any rectifier previously available. With basic
ratings of 600 V and 8 A continuous current, the HFA08TB60
is especially well suited for use as the companion diode for
IGBTs and MOSFETs. In addition to ultrafast recovery time,
the HEXFRED® product line features extremely low values of
peak recovery current (IRRM) and does not exhibit any
tendency to “snap-off” during the tb portion of recovery. The
HEXFRED features combine to offer designers a rectifier
with lower noise and significantly lower switching losses in
both the diode and the switching transistor. These
HEXFRED advantages can help to significantly reduce
snubbing, component count and heatsink sizes. The
HEXFRED HFA08TB60 is ideally suited for applications in
power supplies and power conversion systems (such as
inverters), motor drives, and many other similar applications
where high speed, high efficiency is needed.
TO-220AC
PRODUCT SUMMARY
VR
600 V
VF at 8 A at 25 °C
1.7 V
IF(AV)
8A
trr (typical)
18 ns
TJ (maximum)
150 °C
Qrr (typical)
65 nC
dI(rec)M/dt (typical)
240 A/µs
IRRM
5.0 A
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Cathode to anode voltage
VR
Maximum continuous forward current
IF
TEST CONDITIONS
TC = 100 °C
VALUES
UNITS
600
V
8.0
Single pulse forward current
IFSM
60
Maximum repetitive forward current
IFRM
24
Maximum power dissipation
PD
Operating junction and storage temperature range
Document Number: 93044
Revision: 30-Jul-08
TC = 25 °C
36
TC = 100 °C
14
TJ, TStg
For technical questions, contact: diodes-tech@vishay.com
- 55 to + 150
A
W
°C
www.vishay.com
1
HFA08TB60
Vishay High Power Products
HEXFRED®
Ultrafast Soft Recovery Diode, 8 A
ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
Cathode to anode
breakdown voltage
VBR
IR = 100 µA
Maximum forward voltage
VFM
IF = 16 A
IF = 8.0 A
MIN.
TYP.
MAX.
600
-
-
-
1.4
1.7
-
1.7
2.1
IF = 8.0 A, TJ = 125 °C
-
1.4
1.7
VR = VR rated
-
0.3
5.0
-
100
500
See fig. 1
UNITS
V
Maximum reverse
leakage current
IRM
Junction capacitance
CT
VR = 200 V
See fig. 3
-
10
25
pF
Series inductance
LS
Measured lead to lead 5 mm from package body
-
8.0
-
nH
UNITS
TJ = 125 °C, VR = 0.8 x VR rated
See fig. 2
µA
DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified)
PARAMETER
Reverse recovery time
Peak recovery current
Reverse recovery charge
Peak rate of fall of recovery
current during tb
SYMBOL
TEST CONDITIONS
trr
IF = 1.0 A, dIF/dt = 200 A/µs, VR = 30 V
MIN.
TYP.
MAX.
-
18
-
trr1
TJ = 25 °C
-
37
55
trr2
TJ = 125 °C
-
55
90
-
3.5
5.0
-
4.5
8.0
IRRM1
TJ = 25 °C
IRRM2
TJ = 125 °C
IF = 8.0 A
dIF/dt = 200 A/µs
VR = 200 V
ns
A
Qrr1
TJ = 25 °C
-
65
138
Qrr2
TJ = 125 °C
-
124
360
dI(rec)M/dt1
TJ = 25 °C
-
240
-
dI(rec)M/dt2
TJ = 125 °C
-
210
-
MIN.
TYP.
MAX.
UNITS
-
-
300
°C
-
-
3.5
nC
A/µs
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
Lead temperature
Tlead
Thermal resistance,
junction to case
RthJC
Thermal resistance,
junction to ambient
RthJA
Typical socket mount
-
-
80
Thermal resistance,
case to heatsink
RthCS
Mounting surface, flat, smooth and greased
-
0.5
-
-
2.0
-
g
-
0.07
-
oz.
6.0
(5.0)
-
12
(10)
kgf · cm
(lbf · in)
0.063" from case (1.6 mm) for 10 s
Weight
Mounting torque
Marking device
www.vishay.com
2
Case style TO-220AC
For technical questions, contact: diodes-tech@vishay.com
K/W
HFA08TB60
Document Number: 93044
Revision: 30-Jul-08
HFA08TB60
100
1000
TJ = 150 °C
10
1
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
0.1
0.4
100
IR - Reverse Current (µA)
IF - Instantaneous Forward Current (A)
HEXFRED®
Vishay High Power Products
Ultrafast Soft Recovery Diode, 8 A
TJ = 125 °C
10
1
0.1
TJ = 25 °C
0.01
0.001
0.8
1.2
1.6
2.0
2.4
2.8
0
3.2
100
300
200
500
400
600
VFM - Forward Voltage Drop (V)
VR - Reverse Voltage (V)
Fig. 1 - Maximum Forward Voltage Drop vs.
Instantaneous Forward Current
Fig. 2 - Typical Reverse Current vs. Reverse Voltage
CT - Junction Capacitance (pF)
100
TJ = 25 °C
10
1
1
10
100
1000
VR - Reverse Voltage (V)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
ZthJC - Thermal Response
10
1
PDM
Single pulse
(thermal response)
0.01
0.00001
t1
D = 0.50
D = 0.20
D = 0.10
D = 0.05
D = 0.02
D = 0.01
0.1
0.0001
0.001
t2
Notes:
1. Duty factor D = t1/t2
2. Peak TJ = PDM x ZthJC + TC
0.01
0.1
1
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
Document Number: 93044
Revision: 30-Jul-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com
3
HFA08TB60
Vishay High Power Products
HEXFRED®
Ultrafast Soft Recovery Diode, 8 A
80
500
IF = 16 A
IF = 8 A
IF = 4 A
400
Qrr (nC)
trr (ns)
60
40
VR = 200 V
TJ = 125 °C
TJ = 25 °C
300
200
IF = 16 A
IF = 8 A
IF = 4 A
20
100
VR = 200 V
TJ = 125 °C
TJ = 25 °C
0
100
0
100
1000
dIF/dt (A/µs)
dIF/dt (A/µs)
Fig. 5 - Typical Reverse Recovery Time vs. dIF/dt
Fig. 7 - Typical Stored Charge vs. dIF/dt
20
10 000
VR = 200 V
TJ = 125 °C
TJ = 25 °C
dI(rec)M/dt (A/µs)
15
Irr (A)
1000
IF = 16 A
IF = 8 A
IF = 4 A
10
IF = 16 A
IF = 8 A
IF = 4 A
1000
5
VR = 200 V
TJ = 125 °C
TJ = 25 °C
0
100
www.vishay.com
4
1000
100
100
1000
dIF/dt (A/µs)
dIF/dt (A/µs)
Fig. 6 - Typical Recovery Current vs. dIF/dt
Fig. 8 - Typical dI(rec)M/dt vs. dIF/dt
For technical questions, contact: diodes-tech@vishay.com
Document Number: 93044
Revision: 30-Jul-08
HFA08TB60
HEXFRED®
Vishay High Power Products
Ultrafast Soft Recovery Diode, 8 A
VR = 200 V
0.01 Ω
L = 70 µH
D.U.T.
dIF/dt
adjust
D
IRFP250
G
S
Fig. 9 - Reverse Recovery Parameter Test Circuit
(3)
trr
IF
ta
tb
0
Qrr
(2)
IRRM
(4)
0.5 IRRM
dI(rec)M/dt (5)
0.75 IRRM
(1) dIF/dt
(1) dIF/dt - rate of change of current
through zero crossing
(2) IRRM - peak reverse recovery current
(3) trr - reverse recovery time measured
from zero crossing point of negative
going IF to point where a line passing
through 0.75 IRRM and 0.50 IRRM
extrapolated to zero current.
(4) Qrr - area under curve defined by trr
and IRRM
Qrr =
trr x IRRM
2
(5) dI(rec)M/dt - peak rate of change of
current during tb portion of trr
Fig. 10 - Reverse Recovery Waveform and Definitions
LINKS TO RELATED DOCUMENTS
Dimensions
http://www.vishay.com/doc?95221
Part marking information
http://www.vishay.com/doc?95224
Document Number: 93044
Revision: 30-Jul-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com
5
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
很抱歉,暂时无法提供与“HFA08TB60”相匹配的价格&库存,您可以联系我们找货
免费人工找货