ILD620-X009T

ILD620, ILD620GB, ILQ620, ILQ620GB www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input (Dual, Quad Channel) FEATURES Dual Channel A/C Quad Channel 1 8 • • • • • Identical channel to channel footprint ILD620 crosses to TLP620-2 ILQ620 crosses to TLP620-4 High collector emitter voltage, BVCEO = 70 V Dual and quad packages feature: - Reduced board space - Lower pin and parts count - Better channel to channel CTR match - Improved common mode rejection • Isolation test voltage 5300 VRMS • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 16 C A/C 1 A/C 2 15 E C A/C 3 14 C A/C 2 7 E A/C 4 13 E A/C 3 6 C A/C 5 12 C A/C 4 5 E A/C 6 11 E A/C 7 10 C A/C 8 9 E V D E DESCRIPTION AGENCY APPROVALS The ILD620, ILQ620, ILD620GB, and ILQ620GB are multi-channel input phototransistor optocouplers that use inverse parallel GaAs IRLED emitter and high gain NPN silicon phototransistors per channel. These devices are constructed using over/under leadframe optical coupling and double molded insulation resulting in a withstand test voltage of 5300 VRMS. The LED parameters and the linear CTR characteristics make these devices well suited for AC voltage detection. The ILD620GB and ILQ620GB with its low IF guaranteed CTRCEsat minimizes power dissipation of the AC voltage detection network that is placed in series with the LEDs. Eliminating the phototransistor base connection provides added electrical noise immunity from the transients found in many industrial control environments. • • • • • UL1577, file no. E52744 system code H, double protection cUL tested to CSA 22.2 bulletin 5A DIN EN 60747-5-5 (VDE 0884) FIMKO CQC GB4943.1-2011 and GB8898:2011 (suitable for installation altitude below 2000 m)       ORDERING INFORMATION DIP I L x 6 2 0 x x - X PART NUMBER 0 # PACKAGE OPTION x = D (Dual) or Q (Quad) # T TAPE AND REEL 7.62 mm Option 7 > 0.1 mm > 0.7 mm AGENCY CERTIFIED/PACKAGE UL, cUL, FIMKO DIP-8 SMD-8, option 7 SMD-8, option 9 DIP-16 SMD-16, option 7 SMD-16, option 9 VDE, UL, cUL, FIMKO DIP-16 SMD-16, option 9 DUAL CHANNEL 50 to 600 ILD620 ILD620-X007T (1) ILD620-X009T (1) 50 to 600 - Option 9 QUAD CHANNEL CTR (%) 100 to 600 50 to 600 ILD620GB ILD620GB-X009T (1) ILQ620 ILQ620-X007 ILQ620-X009T (1) 100 to 600 50 to 600 ILQ620-X001 ILQ620-X019T (1) 100 to 600 ILQ620GB ILQ620GB-X009T (1) 100 to 600 - Notes • Additional options may be possible, please contact sales office. (1) Also available in tubes, do not put T on the end. Rev. 1.8, 12-Apr-13 Document Number: 83653 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD620, ILD620GB, ILQ620, ILQ620GB www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT mA INPUT Forward current IF ± 60 Surge current IFSM ± 1.5 A Power dissipation Pdiss 100 mW 1.3 mW/°C Derate linearly from 25 °C OUTPUT Collector emitter breakdown voltage Collector current BVCEO 70 V IC 50 mA IC 100 mA Pdiss 150 mW 2 mW/°C VRMS t