ILD74-X009T

ILD74, ILQ74 www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output (Dual, Quad Channel) Dual Channel A 1 8 E FEATURES C 2 7 C • ILD74, ILQ74 TTL compatible C 3 6 C • Transfer ratio, 35 % typical A 4 5 E • Coupling capacitance, 0.5 pF A 1 16 E C 2 15 C C 3 14 C A 4 13 E A 5 12 E C 6 11 C C 7 10 C A 8 9 E • Single, dual, and quad channel Quad Channel • Industry standard DIP packages • Material categorization: for definitions of compliance www.vishay.com/doc?99912 please see AGENCY APPROVALS • UL / cUL 1577 • DIN EN 60747-5-5 (VDE 0884-5), available with option 1 i179015-1 • CQC LINKS TO ADDITIONAL RESOURCES • CSA 93751 • FIMKO: ILQ74 series Related Documents • FIMKO: ILD74 series DESCRIPTION The ILD74, ILQ74 is an optically coupled pair with a GaAIAs infrared LED and a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and output. The ILD74, ILQ74 is especially for driving medium-speed logic, where it may be used to eliminate troublesome ground loop and noise problems. Also it can be used to replace relays and transformers in many digital interface applications, as well as analog applications such as CTR modulation. The ILD74 has two isolated channels in a single DIP package; the ILQ74 has four isolated channels per package. ORDERING INFORMATION I L x 7 4 - X 0 PART NUMBER # # PACKAGE OPTION x = D (Dual) or Q (Quad) AGENCY CERTIFIED / PACKAGE DIP-# Option 6 7.62 mm 10.16 mm Option 7 Option 9 T TAPE AND REEL > 0.7 mm DUAL CHANNEL CTR (%) ≥ 12.5 ≥ 12.5 DIP-8 SMD-8, option 9 DIP-16 ILD74 ILD74-X009T - ILQ74 SMD-16, option 9 - ILQ74-X009T (1) ≥ 12.5 - ≥ 12.5 ILQ74-X001 UL, cUL, CQC, CSA, FIMKO VDE, UL, cUL, CQC, CSA, FIMKO DIP-16 > 0.1 mm QUAD CHANNEL Notes • Additional options may be possible, please contact sales office (1) Also available in tubes, do not put “T” on the end Rev. 1.8, 15-Apr-2021 Document Number: 83640 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD74, ILQ74 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT INPUT Peak reverse voltage VR 3 V Forward continuous current IF 60 mA Power dissipation Pdiss Derate linearly from 55 % 100 mW 1.33 mW/°C OUTPUT Collector emitter breakdown voltage BVCEO 20 V Emitter collector breakdown voltage BVECO 5 V Collector base breakdown voltage BVCBO 70 V Pdiss 150 mW 2 mW/°C mW Power dissipation Derate linearly from 25 °C COUPLER Total package dissipation ILD74 Ptot 400 ILQ74 Ptot 500 mW 5.33 mW/°C ILD74 Derate linearly from 25 °C 6.67 mW/°C Storage temperature ILQ74 Tstg -55 to +150 °C Operating temperature Tamb -55 to +100 °C 10 s Lead soldering time at 260 °C Note • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Forward voltage IF = 20 mA VF - 1.3 1.5 V Reverse current VR = 3 V IR - 0.1 100 μA Capacitance VR = 0 V CO - 25 - pF INPUT OUTPUT Collector emitter breakdown voltage IC = 1 mA BVCEO 20 50 - V Collector emitter leakage current VCE = 5 V, IF = 0 A ICEO - 5 500 nA Capacitance collector emitter VCE = 0 V, f = 1 Hz CCE - 10 - pF IC = 2 mA, IF = 16 mA COUPLER Saturation voltage, collector emitter VCEsat - 0.3 0.5 V Resistance (input to output) RIO - 100 - GΩ Capacitance (input to output) CIO - 0.5 - pF Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER DC current transfer ratio Rev. 1.8, 15-Apr-2021 TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT IF = 16 mA, VCE = 5 V CTRDC 12.5 35 - % Document Number: 83640 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD74, ILQ74 www.vishay.com Vishay Semiconductors SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Switching times TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT RL = 100 Ω, VCE = 10 V, IC = 2 mA ton, toff - 3 - μs SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION Climatic classification SYMBOL VALUE According to IEC 68 part 1 UNIT 55 / 100 / 21 Comparative tracking index CTI 175 VISO 4420 VRMS Maximum transient isolation voltage VIOTM 10 000 Vpeak Maximum repetitive peak isolation voltage VIORM 890 Vpeak VIO = 500 V, Tamb = 25 °C RIO ≥ 1012 Ω VIO = 500 V, Tamb = 100 °C RIO ≥ 1011 Ω Output safety power PSO 400 mW Input safety current ISI 275 mA Safety temperature TS 175 °C ≥7 mm ≥7 mm ≥ 0.4 mm Maximum rated withstanding isolation voltage t = 1 min Isolation resistance Creepage distance Clearance distance Insulation thickness DTI Note • As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.5 NCTR - Normalized (CTR) VF - Forward Voltage (V) 1.4 1.3 Tamb = - 55 °C 1.2 Tamb = 25 °C 1.1 1.0 0.9 Tamb = 85 °C 0.8 Normalized to: VCE = 10 V, IF = 10 mA TA = 25 °C CTRce(sat) VCE = 0.4 V 1.0 0.5 NCTR(SAT) NCTR 0.0 0.7 0.1 iil74_01 1 10 IF - Forward Current (mA) Fig. 1 Forward Voltage vs. Forward Current Rev. 1.8, 15-Apr-2021 0.1 100 iil74_02 1 10 100 IF - LED Current (mA) Fig. 1 - Normalized Non-Saturated and Saturated CTR vs. LED Current Document Number: 83640 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD74, ILQ74 www.vishay.com 35 Normalized to: VCE = 10 V, IF = 10 mA, TA = 25 °C CTRce(sat) VCE = 0.4 V TA = 50 °C 1.0 0.5 NCTR(SAT) NCTR ICE - Collector Current (mA) NCTR - Normalized (CTR) 1.5 Vishay Semiconductors 1 10 50 °C 20 70 °C 25 °C 15 85 °C 10 5 0 100 IF - LED Current (mA) iil74_03 1.0 CTRce(sat) VCE = 0.4 V TA = 70 °C 0.5 NCTR(SAT) NCTR I CEO - Collector Emitter (nA) Normalized to: VCE = 10 V,IF = 10 mA TA = 25 °C 0.0 1 10 10 5 10 4 10 3 10 2 10 1 40 50 60 Typical 10 -1 -2 - 20 0 20 40 60 80 100 TA - Ambient Temperature (°C) iil74_07 Fig. 3 - Normalized Non-Saturated and Saturated CTR vs. LED Current 30 VCE = 10 V 100 10 100 IF - LED Current (mA) iil74_04 20 IF - LED Current (mA) Fig. 5 - Collector Emitter Current vs. Temperature and LED Current 1.5 0.1 10 iil74_06 Fig. 2 - Normalized Non-Saturated and Saturated CTR vs. LED Current NCTR - Normalized (CTR) 25 0 0.0 0.1 Fig. 6 - Collector Emitter Leakage Current vs.Temperature 1.5 1.5 Normalized to: VCE = 10 V, IF = 10 mA, TA = 25 °C CTRce(sat) VCE = 0.4 V 1.0 TA = 85 °C 0.5 NCTR(SAT) NCTR NCTRcb - Normalized CTRcb NCTR - Normalized CTR 30 1.0 Normalized to: IF = 10 mA Vcb = 9.3 V TA = 25 °C 25 °C 0.5 50 °C 70 °C 0.0 0.0 0.1 iil74_05 1 10 IF - LED Current (mA) Fig. 4 - Normalized Non-Saturated and Saturated CTR vs. LED Current Rev. 1.8, 15-Apr-2021 0.1 100 iil74_08 1 10 100 IF - Current (mA) Fig. 7 - Normalized CTRcb vs. LED Current and Temperature Document Number: 83640 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD74, ILQ74 www.vishay.com NhFE(sat) - Normalized Saturated hFE Vishay Semiconductors 100 TA = 25 °C Icb = 1.0357 * IF ^ 1.3631 10 1 0.1 0.01 0.1 1 10 100 IF - LED Current (mA) iil74_09 70 °C 50 °C 25 °C - 20 °C 0.5 VCE = 0.4 V 0.0 1 10 100 1000 1 0.1 NIb, TA = - 20 °C NIb, TA = 25 °C NIb, TA = 50 °C NIb, TA = 70 °C 0.01 0.1 1 10 100 I F - LED Current (mA) iil74_10 70 °C 50 °C 1.0 25 °C 2.5 TA = 25 °C, IF = 10 mA VCC = 5 V, Vth = 1.5 V 100 tpHL 2.0 10 1.5 tpLH 1 0.1 iil74_13 Fig. 9 - Normalized Photocurrent vs. IF and Temperature 1.2 tpLH - Propagation Delay (µs) Normalized to: IF = 10 mA, TA = 25 °C 1000 Ib - Base Current (µA) Fig. 11 - Normalized Saturated hFE vs. Base Current and Temperature 10 Normalized Photcurrent Normalized to: VCE = 10 V IB = 20 µA TA = 25 °C 1.0 iil74_12 Fig. 8 - Collector Base Photocurrent vs. LED Current NhFE - Normalized (hFE) 1.5 1 10 tpHL - Propagation Delay (µs) Icb - Collector Base Photocurrent (µA) 1000 1.0 100 RL - Collector Load Resistor (KΩ) Fig. 12 - Propagation Delay vs. Collector Load Resistor Normalized to: Ib = 20 µA VCE = 10 V Ta = 25 °C - 20 °C 0.8 0.6 0.4 1 iil74_11 10 100 1000 Ib - Base Current (µA) Fig. 10 - Normalized Non-Saturated hFE vs. Base Current and Temperature Rev. 1.8, 15-Apr-2021 Document Number: 83640 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD74, ILQ74 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters Pin one ID 4 3 2 1 5 6 7 8 6.645 ± 0.165 ISO method A 9.77 ± 0.14 0.95 ± 0.19 7.62 typ. 0.79 4° typ. 3.555 ± 0.255 6.095 ± 0.255 1.27 10° 3.045 ± 0.255 0.70 ± 0.19 3° to 9° 0.51 ± 0.05 2.54 typ. 0.25 ± 0.05 i178006 Pin one ID 8 7 6 5 4 3 2 1 6.48 6.81 9 10 11 12 13 14 15 16 ISO method A 19.77 20.07 0.76 1.14 0.79 7.62 typ. 3.30 3.81 10° typ. 4° 0.46 0.56 0.51 0.89 2.54 typ. 3° to 9° 1.27 5.84 6.35 2.79 3.30 0.20 0.30 i178007 Option 6 Option 7 Option 9 7.62 typ. 7.62 typ. 10.3 max. 7.62 typ. 3.5 ± 0.3 0.7 min. 4.3 ± 0.3 0.1 ± 0.1 3.6 ± 0.3 0.1 min. 8 min. 2.55 ± 0.25 0.6 min. 10.3 max. 0.6 min. 8 min. 10.16 typ. 0.76 0.76 20802-21 2.54 R 0.25 2.54 R 0.25 1.78 8 min. 11.05 1.78 1.52 8 min. 11.05 1.52 0.76 2.54 R 0.25 1.78 8 min. 11.05 Rev. 1.8, 15-Apr-2021 1.52 Document Number: 83640 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD74, ILQ74 www.vishay.com Vishay Semiconductors PACKAGE MARKING ILD74 V D E V YWW H 68 ILQ74 V D E V YWW H 68 Notes • Only options 1 and 7 reflected in the package marking • The VDE logo is only marked on option 1 parts • Tape and reel suffix (T) is not part of the package marking Rev. 1.8, 15-Apr-2021 Document Number: 83640 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000