LH1518AABTR

LH1518AAB, LH1518AABTR, LH1518AT www.vishay.com Vishay Semiconductors 1 Form A Solid-State Relay (Normally Open) FEATURES • Isolation test voltage 5300 VRMS • Load voltage 250 V A 1 6 S1 C 2 5 DC • Load current 155 mA / 300 mA • Clean bounce free switching • Current limit protection • Low power consumption 3 4 S2 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • General telecom switching • Instrumentation DESCRIPTION • Industrial controls The LH1518 is an SPST normally open switch (1 Form A) that can replace electromechanical relays in many applications. The relay is constructed using a GaAlAs LED for actuation control and high reliable MOSFETs for the output switch. In addition, it employs current-limiting circuitry to provide overvoltage protection. The LH1518 provides current limiting also for unidirectional DC applications. • Automatic test equipment AGENCY APPROVALS • UL1577, file no. E52744 ORDERING INFORMATION L H 1 5 PART NUMBER PACKAGE SMD-6, tube SMD-6, tape and reel DIP-6, tube Rev. 1.6, 05-Jul-2018 1 8 # ELECTR. VARIATION # # PACKAGE CONFIG. T DIP R TAPE AND REEL 7.62 mm SMD > 0.1 mm UL LH1518AAB LH1518AABTR LH1518AT Document Number: 83816 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LH1518AAB, LH1518AABTR, LH1518AT www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER CONDITION SYMBOL VALUE UNIT IRED continuous forward current IF 50 mA IRED reverse voltage VR 5 V Pdiss 80 mW DC or peak AC load voltage VL 250 V Continuous load current (AC/DC configuration) IL 155 mA IL 300 mA Pdiss 550 mW INPUT Input power dissipation OUTPUT Continuous load current (DC only configuration) SSR output power dissipation (continuous) SSR Ambient temperature range Tamb -40 to +85 °C Storage temperature range Tstg -40 to +150 °C Tsld 260 °C Soldering temperature t = 10 s max. Note • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT INPUT IRED forward current, switch turn-on IL = 100 mA, t = 10 ms IFon - 0.4 2 mA IRED forward current, switch turn-off VL = ± 200 V IFoff 0.05 0.35 - mA IF = 10 mA VF 1.15 1.36 1.45 V On-resistance (AC/DC configuration) IF = 5 mA, IL = 50 mA RON 6 12 20 Ω On-resistance (DC only configuration) IF = 5 mA, IL = 100 mA RON 1.5 3.2 5 Ω IRED forward voltage OUTPUT Off-resistance IF = 0 mA, VL = ± 100 V ROFF 0.5 5000 - GΩ IF = 0 mA, VL = ± 100 V IO -