LH1546ADFTR

LH1546AD, LH1546ADF, LH1546ADFTR www.vishay.com Vishay Semiconductors 1 Form A Solid-State Relay FEATURES S S' • Current limit protection • Isolation test voltage 5300 VRMS • Typical RON 28  A 1 1 4 S • Load voltage 350 V • Load current 120 mA K 2 • High surge capability 3 S1 • Clean bounce free switching i179058-3 i179080 • Low power consumption 1 • High reliability monolithic receptor DESCRIPTION • SMD lead available on tape and reel The LH1546AD (4 pin DIP) is robust, ideal for telecom and ground fault applications. It is an SPST normally open switch (1 form A) that replaces electromechanical relays in many applications. It is constructed using a GaAs LED for actuation control and an integrated monolithic die for the switch output. The die, fabricated in a high-voltage dielectrically isolated BCDMOS technology, is comprised of a photodiode array, switch control circuitry and MOSFET switches. In addition, it employs current-limiting circuitry which meets lightning surge testing as per ANSI/TIA-968-B and other regulatory voltage surge requirements when overvoltage protection is provided. • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC APPLICATIONS • General telecom switching - On/off hook control - Ring relay - Dial pulse - Ground start - Ground fault protection • Instrumentation • Industrial controls Note • See “solid-state relays” (application note 56) AGENCY APPROVALS UL1577: file no. E52744 system code H, double protection BSI/BABT: certification no. 7980 ORDERING INFORMATION L H 1 5 PART NUMBER 4 6 A # ELECTR. VARIATION # PACKAGE CONFIG. T TAPE AND REEL PACKAGE 7.62 mm SMD > 0.1 mm UL, BSI SMD-4, gullwing, tubes LH1546ADF SMD-4, gullwing, tape and reel LH1546ADFTR DIP-4, tubes Rev. 1.7, 25-Jul-11 DIP R LH1546AD 1 Document Number: 83836 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LH1546AD, LH1546ADF, LH1546ADFTR www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT IF 50 mA IR 10 μA VR 8 V IL  50 μA VL 350 V IL 120 mA INPUT LED continuous forward current LED reverse voltage OUTPUT DC or peak AC load voltage Continuous DC load current at 25 °C SSR SSR output power dissipation (continuous) Pdiss 550 mW Ambient temperature range Tamb - 40 to + 85 °C °C Storage temperature range Soldering temperature (1) Isolation test voltage Isolation resistance Tstg - 40 to + 150 t = 10 s max. Tsld 260 °C t=1s VISO 5300 VRMS VIO = 500 V, Tamb = 25 °C RIO  1012  VIO = 500 V, Tamb = 100 °C RIO  1011  Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. 1.7 3 UNIT INPUT LED forward current, switch turn-on IL = 100 mA, t = 10 ms IFon LED forward current, switch turn-off VL = ± 300 V IFoff 0.2 1.6 IF = 10 mA VF 1.15 1.2 1.45 V IF = 5 mA, IL = 50 mA RON 28 35  Off-resistance IF = 0 mA, VL = ± 100 V ROFF Off-state leakage current IF = 0 mA, VL = ± 100 V IO 0.32 CO 55 pF CO 10 pF CIO 0.5 pF LED forward voltage mA mA OUTPUT On-resistance, AC/DC: pin 3 (±) to 4 (±) Output capacitance pin 3 to 4 IF = 0 mA, VL = 1 V 0.5 300 G 200 nA TRANSFER Capacitance (input to output) VISO = 1 V Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL TYP. MAX. UNIT Turn-on time IF = 5 mA, IL = 50 mA ton 2 3 ms Turn-off time IF = 5 mA, IL = 50 mA toff 0.08 3 ms Rev. 1.7, 25-Jul-11 MIN. 2 Document Number: 83836 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LH1546AD, LH1546ADF, LH1546ADFTR www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 120 40 IL = 50 mA IFon = 5 mA 80 Change in Ron (%), Normalized to 25 °C Load Current (mA) IF = 5.0 mA 30 100 IFon = 3 mA 60 IFon = 2 mA 40 20 20 10 0 - 10 - 20 - 30 0 - 40 - 20 17335 0 20 40 60 - 40 - 40 80 20 40 60 80 90 1.6 T = - 40 °C T = - 20 °C T = 0 °C 1.4 80 Capacitance (pF) 1.5 VF (V) 0 Ambient Temperature (°C) Fig. 4 - CTRCB vs. LED Current Fig. 1 - Recommended Operating Conditions 1.3 1.2 T = 25 °C T = 50 °C T = 70 °C T = 85 °C 1.1 1.0 70 60 50 40 30 20 10 0.9 0 0.1 1 ilh1546ad_01 10 0 100 10 20 30 40 50 60 70 80 90 100 ilh1546ad_04 IF (mA) Fig. 2 - LED Voltage vs. Temperature Applied Voltage (V) Fig. 5 - Switch Capacitance vs. Applied Voltage 250 100 IL = 100 mA 200 150 ILeakage (nA) LED Forward Current for Switch Turn-on (%), Normalized to 25 °C - 20 ilh1546ad_03 Ambient Temperature (°C) 100 50 10 T = 85 °C T = 70 °C T = 50 °C T = 25 °C 1 0 - 50 - 40 17334 0.1 - 20 0 20 40 60 0 80 Ambient Temperature (°C) Fig. 3 - LED Current for Switch Turn-on vs. Temperature Rev. 1.7, 25-Jul-11 50 100 150 200 250 300 350 400 ilh1546ad_06 Load Voltage (V) Fig. 6 - Leakage Current vs. Applied Voltage 3 Document Number: 83836 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LH1546AD, LH1546ADF, LH1546ADFTR www.vishay.com Vishay Semiconductors 140 60 40 20 0 - 20 - 40 T = 85 °C 120 IF = 2.0 mA IF = 3.0 mA IF = 4.0 mA IF = 5.0 mA IF = 6.0 mA IF = 8.0 mA IF = 10 mA Turn-off Time (µs) Change in Ton (%), Normalized to 25 °C 80 T = 25 °C 100 80 T = - 40 °C 60 40 20 0 - 20 ilh1546ad_07 0 20 40 60 80 0 Ambient Temperature (°C) ilh1546ad_10 5 10 20 25 30 35 40 45 50 100 LED Forward Current (mA) Fig. 10 - Turn-off Time vs. LED Current Fig. 7 - Turn-on Time vs. Temperature 30 IF = 10 mA IF = 8.0 mA IF = 6.0 mA Change in Toff (%), Normalized to 25 °C 20 10 0 - 10 IF = 2.0 mA IF = 3.0 mA IF = 4.0 mA IF = 5.0 mA - 20 - 30 - 40 - 50 - 40 - 20 ilh1546ad_08 0 20 40 60 80 Ambient Temperature (°C) Fig. 8 - Turn-off Time vs. Temperature 6 5 T = 25 °C T = - 40 °C T = 85 °C Ton (ms) 4 3 2 1 0 0 5 ilh1546ad_09 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) Fig. 9 - Turn-on Time vs. LED Current Rev. 1.7, 25-Jul-11 4 Document Number: 83836 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LH1546AD, LH1546ADF, LH1546ADFTR www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters DIP 4 3 6.81 6.48 ISO method A 1 2 Pin one ID 4.83 4.55 7.62 typ. 0.79 typ. 1.14 0.76 1.27 typ. 3.81 3.30 6.35 5.84 10° 4° typ. 3.30 2.79 0.89 0.508 0.56 0.46 3° to 9° 0.30 0.20 1.27 i178028 2.54 SMD 0.76 Pin one ID R 0.25 2.54 1.78 6.48 6.81 8 min. 1.52 11.05 3 4 9.52 10.03 4.55 4.83 0.76 1.14 7.52 7.90 0.79 typ. 10° 3.30 3.81 0.25 typ. ISO method A 8 min. 0.249 0.102 4° typ. 2.54 typ. 1.27 typ. i178029 Lead coplanarity 0.004 max. 0.508 1.020 3° to 7° PACKAGE MARKING (example) LH1546 V YWW H 68 Note • Tape and reel suffix (TR) is not part of the package marking. Rev. 1.7, 25-Jul-11 5 Document Number: 83836 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Footprint and Schematic Information www.vishay.com Vishay Semiconductors Footprint and Schematic Information for LH1546 The footprint and schematic symbols for the following parts can be accessed using the associated links. They are available in Eagle, Altium, KiCad, OrCAD / Allegro, Pulsonix, and PADS. Note that the 3D models for these parts can be found on the Vishay product page. PART NUMBER FOOTPRINT / SCHEMATIC LH1546AAB www.snapeda.com/parts/LH1546AAB/Vishay/view-part LH1546AABTR www.snapeda.com/parts/LH1546AABTR/Vishay/view-part LH1546AD www.snapeda.com/parts/LH1546AD/Vishay/view-part LH1546ADF www.snapeda.com/parts/LH1546ADF/Vishay/view-part LH1546ADFTR www.snapeda.com/parts/LH1546ADFTR/Vishay/view-part LH1546AEF www.snapeda.com/parts/LH1546AEF/Vishay/view-part LH1546AEFT2 www.snapeda.com/parts/LH1546AEFT2/Vishay/view-part LH1546AEFTR www.snapeda.com/parts/LH1546AEFTR/Vishay/view-part LH1546AT www.snapeda.com/parts/LH1546AT/Vishay/view-part For technical issues and product support, please contact optocoupleranswers@vishay.com. SMD 1 DIP 22624 i179080 1 i179041-2 Rev. 1.0, 09-May-17 Document Number: 84490 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000