MCT5211-X007

MCT5211 Vishay Semiconductors Optocoupler, Phototransistor Output, Low Input Current, with Base Connection FEATURES • Saturation CTR - MCT5211, > 100 % at IF = 1.6 mA A 1 6 B C 2 5 C • High isolation voltage, 5300 VRMS 4 E • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC NC 3 i179004-7 V D E AGENCY APPROVALS • UL1577, file no. E52744 system code H, double protection i179004-3 • BSI IEC 60950; IEC 60065 DESCRIPTION • DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 (pending), available with option 1 The MCT5211 is a optocoupler with a high efficiency AIGaAs LED optically coupled to a NPN phototransistor. The high performance LED makes operation at low input currents practical. The coupler is housed in a six pin DIP package. Isolation test voltage is 5300 VRMS. Because these parts have guaranteed CTRs at 1 mA and 3 mA, they are ideally suitable for interfacing from CMOS to TTL or LSTTL to TTL. They are also ideal for telecommunications applications such as ring or off-hook detection. • CSA 93751 ORDERING INFORMATION M C T 5 2 1 1 - PART NUMBER X 0 # # PACKAGE OPTION T TAPE AND REEL DIP 7.62 mm Option 7 > 0.7 mm Option 9 > 0.1 mm CTR (%) AGENCY CERTIFIED/PACKAGE 1 mA UL, BSI, CSA > 110 DIP-6 MCT5211 SMD-6, option 7 MCT5211-X007T (1) SMD-6, option 9 MCT5211-X009T (1) UL, BSI, CSA, VDE > 110 SMD-6, option 7 MCT5211-X017T Note • Additional options may be possible, please contact sales office. (1) Also available in tubes, do not put T on the end. Document Number: 83657 Rev. 1.6, 23-Feb-11 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 1 MCT5211 Vishay Semiconductors Optocoupler, Phototransistor Output, Low Input Current, with Base Connection ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Peak reverse voltage VR 6 V Forward continuos current IF 40 mA Pdiss 75 mW 1 mW/°C Power dissipation Derate linearly from 25 °C OUTPUT Collector emitter breakdown voltage BVCEO 30 V Emitter collector breakdown voltage BVECO 7 V Collector base breakdown voltage BVCBO 70 V Pdiss 200 mW 2.6 mW/°C VRMS Power dissipation Derate linearly from 25 °C COUPLER Isolation test voltage VISO 5300 Total package dissipation (LED and detector) Ptot 260 mW Derate linearly from 25 °C 3.5 mW/°C Creepage distance 7 mm Clearance distance 7 mm Comparative tracking index per DIN IEC 112/VDE 0303, part 1 CTI 175 VIO = 500 V, Tamb = 25 °C RIO  1012 VIO = 500 V, Tamb = 100 °C RIO  1011  Operating temperature Tamb - 55 to + 100 °C Storage temperature Tstg - 55 to + 150 °C Isolation resistance  Note • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT 1.2 1.5 V INPUT Forward voltage IF = 5 mA VF Reverse voltage IR = 10 μA VR 6 V OUTPUT DC forward current gain VCE = 5 V, IC = 100 μA hFE 100 Collector emitter breakdown voltage IC = 100 μA BVCEO 30 V Emitter collector breakdown voltage IE = 100 μA BVECO 7 V Collector base breakdown voltage IE = 10 μA BVCBO 70 V Collector emitter leakage voltage VCE = 10 V ICEO 5 100 nA VCEsat 0.25 0.4 V 200 COUPLER Saturation voltage IF = 1.6 mA, IC = 1.6 mA MCT5211 Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. www.vishay.com 2 For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83657 Rev. 1.6, 23-Feb-11 MCT5211 Optocoupler, Phototransistor Output, Low Input Current, with Base Connection Vishay Semiconductors CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER Current transfer ratio (collector emitter saturated) Current transfer ratio Current transfer ratio (collector base) TEST CONDITION PART SYMBOL MIN. TYP. VCE = 0.4 V, IF = 1.6 mA MCT5211 CTRCEsat 100 200 MAX. UNIT % VCE = 0.4 V, IF = 1 mA MCT5211 CTRCEsat 75 150 % VCE = 5 V, IF = 1.6 mA MCT5211 CTR 150 300 % VCE = 5 V, IF = 1 mA MCT5211 CTR 110 225 % VCE = 4.3 V, IF = 1.6 mA MCT5211 CTRCB 0.3 0.6 % VCE = 4.3 V, IF = 1 mA MCT5211 CTRCB 0.25 0.5 % SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Propagation delay high to low Propagation delay low to high TEST CONDITION PART SYMBOL RL = 750  , IF = 1.6 mA, VCC = 5 V MCT5211 tPHL 20 μs RL = 1.5 k , IF = 1 mA, VCC = 5 V MCT5211 tPHL 40 μs RL = 750  , IF = 1.6 mA, VCC = 5 V MCT5211 tPLH 20 μs RL = 1.5 k , IF = 1 mA, VCC = 5 V MCT5211 tPLH 40 μs V CC = 5 V Input MIN. TYP. MAX. UNIT IF RL VOUT tD VO tR t PL H V TH = 1.5 V imct5210_18 t PHL tS tF imct5210_03 Fig. 1 - Switching Schematic Document Number: 83657 Rev. 1.6, 23-Feb-11 Fig. 2 - Switching Waveform For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 3 MCT5211 Vishay Semiconductors Optocoupler, Phototransistor Output, Low Input Current, with Base Connection TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 35 1000 Icb - Photocurrent (µA) IF - LED Current (mA) 30 25 20 15 10 100 10 1 5 0 1.0 1.1 1.2 1.3 VF - LED Forward Voltage (V) imct5210_01 0.1 0.1 1.4 imct5210_05 100 100 1.0 CTRcb - Collector Base CTR (%) IF - LED Current (mA) 10 Fig. 6 - Photocurrent vs. LED Current Fig. 3 - Forward Current vs. Forward Voltage 10 1 0.1 1.0 0.8 0.6 0.4 0.2 0.0 1.2 1.1 1.3 1.4 VF - LED Forward Voltage (V) imct5210_04 0 imct5210_07 Fig. 4 - LED Forward Current vs. Forward Voltage 5 10 15 20 25 30 35 IF - LED Current (mA) Fig. 7 - Collector Base CTR vs. LED Current 300 1.0 CTRcb - Collector Base - CTR (%) Icb - Photocurrent (µA) 1 IF - LED Current (mA) 250 200 150 100 50 0 0 imct5210_05 5 10 15 20 25 30 35 40 IF - LED Current (mA) Fig. 5 - Collector Base Photocurrent vs. LED Current www.vishay.com 4 0.8 0.6 0.4 0.2 0.0 0.1 imct5210_08 1 10 100 IF - LED Current (mA) Fig. 8 - Collector Base CTR vs. LED Current For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83657 Rev. 1.6, 23-Feb-11 MCT5211 Optocoupler, Phototransistor Output, Low Input Current, with Base Connection 800 700 500 10 V 5V 2V 1V 0.4 V 200 600 500 Vce 10 V 400 5V 300 2V 1V 200 0.4 V 100 100 .1 1 10 100 1 10 100 1000 imct5210_12 IF - LED Current (mA) imct5210_09 .1 Ib - Base Current (µA) Fig. 9 - CTR vs. LED Current 70 Vce 10 V 60 5V 100 50 2V 40 1V 30 800 Vce = 10 V IF - LED Current (mA) 80 Fig. 12 - Transistor Current Gain vs. Base Current 0.4 V 20 700 10 Ice = Icb x hFE 1 600 hFE - Transistor Gain Ratio (%) Vce 400 300 700 HFE - DC Current Gain (Ice/Ib) 600 Ice - Collector Current (mA) Vishay Semiconductors 10 0 imct5210_10 5 10 15 20 IF - LED Current (mA) 0.1 0.1 25 imct5210_13 Fig. 10 - Collector Current vs. LED Current 100 500 1000 Icb - Photocurrent (mA) 100 10 V 5V 2V 1V 0.4 V 700 Vce = 0.4 V Vce 10 10 Fig. 13 - Transfer Curve IF - LED Current (mA) Ice - Collector Current (mA) 100 1 1 600 Ice = Icb x HFE 10 500 400 1 300 200 0.1 0.1 imct5210_11 1 10 100 IF - LED Current (mA) Fig. 11 - Collector Current vs. LED Current Document Number: 83657 Rev. 1.6, 23-Feb-11 .1 .1 imct5210_14 1 10 100 HFE - Transistor Gain 0 100 1000 Icb - Photocurrent (µA) Fig. 14 - Transfer Curve For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 5 MCT5211 Vishay Semiconductors Optocoupler, Phototransistor Output, Low Input Current, with Base Connection 70 Propagation Delay (µs) 60 tPLH 50 IF = 1 mA RL = 10 K 40 Vth = 1.5 V Vce = 5 V 30 tPHL 20 10 105 imct5210_15 106 107 Rbe - Base Emitter Resistor Fig. 15 - Propagation Delay vs. Base Emitter Resistor Propagation Delay (µs) 50 40 30 tPLH IF = 1.6 mA RL = 4.7 K Vth = 1.5 V Vce = 5 V 20 10 tPLH 0 105 imct5210_16 106 107 Rbe - Base Emitter Resistor Fig. 16 - Propagation Delay vs. Base Emitter Resistor 40 Probagation Delay (µs) 35 30 tPLH IF = 3 mA RL = 3 K Vth = 1.5 V Vce = 5 V 25 20 15 10 tPHL 5 0 104 imct5210_17 105 106 107 Rbe - Base Emitter Resistor Fig. 17 - Propagation Delay vs. Base Emitter Resistor www.vishay.com 6 For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83657 Rev. 1.6, 23-Feb-11 MCT5211 Optocoupler, Phototransistor Output, Low Input Current, with Base Connection Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 3 2 1 4 5 6 Pin one ID 6.4 ± 0.1 ISO method A 8.6 ± 0.1 7.62 typ. 1.2 ± 0.1 1 min. 3.555 ± 0.255 18° 4° typ. 2.95 ± 0.5 0.8 min. 0.85 ± 0.05 0.25 typ. 3° to 9° 0.5 ± 0.05 7.62 to 8.81 i178004 2.54 typ. Option 7 Option 9 7.62 typ. 10.3 max. 7.62 typ. 0.7 min. 4.3 ± 0.3 8 min. 0.1 ± 0.1 3.6 ± 0.3 0.6 min. 0.6 min. 10.3 max. 8 min. 20802-19 0.76 R 0.25 2.54 0.76 2.54 R 0.25 1.78 8 min. 11.05 1.52 1.78 8 min. 11.05 1.52 PACKAGE MARKING (example) MCT5211 V YWW H 68 21764-98 Notes • Only option 7 is reflected in the package marking. • The VDE logo is only marked on option 1 parts. • Tape and reel suffix (T) is not part of the package marking. Document Number: 83657 Rev. 1.6, 23-Feb-11 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 7 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1