PTS0805M1B100RP100

PTS AT www.vishay.com Vishay Beyschlag Temperature Dependent Platinum Thin Film Chip Resistor (RTD) FEATURES • Standardized characteristics according to IEC 60751 • AEC-Q200 qualified • Short reaction times down to t0.9  2 s (in air) • Outstanding stability of temperature characteristic • Superior temperature cycling robustness • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS DESIGN SUPPORT TOOLS AVAILABLE 3D 3D 3D Models Temperature measurement and control in • Automotive electronics Design Tools Models • Aviation electronics • Industrial electronics PTS AT SMD flat chip temperature dependent resistors are the perfect choice for temperature control of electronics operating under varying environmental conditions. The highly controlled platinum thin film manufacturing process guarantees an outstanding stability of temperature characteristics which ensures reliable operation even under harsh conditions. Typical applications include automotive, aviation and industrial electronics. TECHNICAL SPECIFICATIONS DESCRIPTION Resistance values R0 at 0 °C PTS0603M PTS0805M PTS1206M 100  100 , 500  100 , 500 , 1000  Temperature coefficient (0 °C to +100 °C), IEC60751 +3850 ppm/K Tolerance classes F0.3, F0.6 Temperature range -55 °C to +175 °C Long term stability |R0/R0|; R0 change after 1000 h at +155 °C  0.1 % Insulation resistance > 10 M Measurement current Imeas. (DC) (1) Self-heating at 0 °C (2) 100  0.1 mA to 0.50 mA 0.1 mA to 1.0 mA 0.1 mA to 1.0 mA 500  - 0.1 mA to 0.40 mA 0.1 mA to 0.40 mA 1000  - - 0.1 mA to 0.25 mA  0.9 K/mW  0.8 K/mW  0.7 K/mW t0.5  0.1 s t0.5  0.2 s t0.5  0.3 s t0.9  0.2 s t0.9  0.3 s t0.9  0.4 s t0.5  1.0 s t0.5  1.5 s t0.5  2.0 s t0.9  3.0 s t0.9  5.0 s Calm air (v = 0.0 m/s) Flowing water (v = 0.4 m/s) Thermal response time (2) Flowing air (v = 3.0 m/s) Failure rate: FITobserved t0.9  2.0 s  0.5 x 10-9/h Notes (1) Indicated measurement currents can be applied continuously with self-heating effect of less then 0.1 °C (2) Valid for sensor element only, in low dissipative mode. Response time and self-heating are influenced by mounting materials as substrate, solder lands, tracks and solders used Revision: 25-Jun-2019 Document Number: 28899 1 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PTS AT www.vishay.com Vishay Beyschlag DIMENSIONS in millimeters Tt W WT H Tb L DIMENSIONS AND MASS TYPE WT Tt Tb MASS (mg) 0.85 ± 0.1 > 75 % of W 0.3 + 0.15/- 0.2 0.3 + 0.15/- 0.2 1.9 1.25 ± 0.15 > 75 % of W 0.4 ± 0.2 0.4 ± 0.2 4.6 > 75 % of W 0.5 ± 0.25 0.5 ± 0.25 9.2 H L W PTS 0603 0.45 + 0.1/- 0.05 1.55 +0.05 / -0.1 PTS 0805 0.45 + 0.1 / - 0.05 2.0 ± 0.1 PTS 1206 0.55 ± 0.1 3.1 + 0.1 / - 0.2 1.6 ± 0.15 SOLDER PAD DIMENSIONS in millimeters X G Y Z RECOMMENDED SOLDERPAD DIMENSIONS TYPE WAVE SOLDERING REFLOW SOLDERING G Y X Z G Y X Z PTS 0603 0.55 1.1 1.1 2.75 0.65 0.7 0.95 2.05 PTS 0805 0.8 1.25 1.50 3.2 0.9 0.9 1.4 2.7 PTS 1206 1.4 1.5 1.9 4.4 1.5 1.15 1.75 3.8 DESCRIPTION A homogeneous film of platinum is deposited on a high grade (AI2O3) ceramic substrate and conditioned to achieve the correct temperature coefficient and stability. The sensor-elements are covered by a protective coating designed for electrical, mechanical and climatic protection. The terminations receive a final pure matte tin on nickel plating, the immunity against tin whisker growth has been proven under extensive testing. QUALITY The result of the determined production is verified by an extensive testing procedure and optical inspection performed on 100 % of the individual sensors. Only accepted products are laid directly into the paper tape in accordance with IEC 60286-3. STORAGE Solderability is specified for 2 years after production or re-qualification. The permitted storage time is 20 years. ASSEMBLY The Pt-sensors are suitable for processing on automatic SMD assembly systems. They are suitable for automatic soldering using wave, reflow or vapour phase as shown in IEC61760-1. The encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, Revision: 25-Jun-2019 including alcohols, esters and aqueous solutions. The suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system. The use of potting resins in close contact with the protective coating or terminations is not recommended. For frequent high temperature usage, thermal compatible substrates and solder alloys should be selected to minimize any thermal mismatch. All products comply with the CEFIC-EECA-EICTA list of legal restrictions on hazardous substances. This includes full compatibility with the following directives: • 2000/53/EC End of Life Vehicle Directive (ELV) and Annex II (ELV II) • 2011/65/EU Restriction of the use of Hazardous Substances Directive (RoHS) • 2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE) APPROVALS The Pt-sensors are tested in accordance with • IEC 60751 • IEC 60068 series The PTS AT are AEC-Q200 qualified. Document Number: 28899 2 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PTS AT www.vishay.com Vishay Beyschlag PART NUMBER AND PRODUCT DESCRIPTION (1) PART NUMBER (2): PTS0805M1B500RP100 P T S 0 8 0 5 M TYPE SIZE CODE 3 digits 4 digits 1 digit PTS = platinum temperature sensor SMD 0603 0805 1206 M = AT (automotive) 1 B 5 0 TOLERANCE CLASS VERSION 0 R P 1 0 0 RESISTANCE VALUE PACKAGING (3) 2 digits 4 digits 2 digits 2 digits 1B = class F0.3 2B = class F0.6 100R = 100  500R = 500  1K00 = 1000  PU P1 P5 00 = standard SPECIAL PRODUCT DESCRIPTION (4): PTS 0805-B AT P1 500R PTS 0805 -B AT P1 500R TYPE SIZE CODE TOLERANCE CLASS VERSION PACKAGING (3) RESISTANCE VALUE PTS = platinum temperature sensor SMD 0603 0805 1206 AT = automotive PU P1 P5 100R = 100  500R = 500  1K = 1000  B = class F0.3 2B = class F0.6 Notes (1) Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION (2) The part number is shown to facilitate the introduction of a unified part numbering system (3) Please refer to table PACKAGING (4) We recommend that the Production Description is used to minimize the possibility of errors in order handling PACKAGING TYPE CODE PTS 0603 PTS 0805 PTS 1206 QUANTITY PU 100 P1 1000 P5 5000 CARRIER TAPE WIDTH PITCH Paper tape acc. IEC 60286-3 8 mm 4 mm BOX/REEL BOX/REEL DIAMETER Plastic box 114 mm Reel 180 mm/7" TEST AND REQUIREMENTS - PERFORMANCE TYPICAL PERFORMANCE TEST CONDITIONS REQUIREMENTS |R0/R0|  ± |R0/R0|  ± T  ± High temperature exposure (storage) AEC-Q200, 1000 h at 155 °C 0.1 % 0.015 % 0.04 °C High temperature exposure (storage) 1000 h at 175 °C 0.2 % 0.018 % 0.05 °C AEC-Q200, 1000 cycles -55 °C to +155 °C 0.5 % 0.04 % 0.10 °C Biased humidity 1000 h, 1 mA biased at 85 °C / 85 % rh 0.5 % 0.015 % 0.04 °C Operational life 1000 h, 1 mA biased at 125 °C 0.2 % 0.01 % 0.03 °C MIL-STD 202, method 204 0.1 % 0.02 % 0.05 °C Temperature cycling Vibration Mechanical shock Resistance to soldering heat ESD Board flex Terminal strength Revision: 25-Jun-2019 MIL-STD 202, method 213 0.1 % 0.02 % 0.05 °C Solder bath dipping 10 s at 260°C 0.25 % 0.05 % 0.13 °C AEC-Q200-002, HBM (CD) 1.0 kV (0603), 1.5 kV (0805), 2.0 kV (1206) 0.2 % 0.01 % 0.03 °C AEC-Q200-005, 2 mm during 60 s 0.2 % 0.015 % 0.04 °C AEC-Q200-006, shear test 10 N / 17.7 N during 60 s 0.25 % 0.018 % 0.05 °C Document Number: 28899 3 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PTS AT www.vishay.com Vishay Beyschlag FUNCTIONAL PERFORMANCE The temperature resistance relationships of the PTS series follow different equations: According to IEC 60751 the values of the coefficients are: A = 3.9083 x 10-3 °C-1 B = -5.775 x 10-7 °C-2 C = -4.183 x 10-12 °C-4 For the temperature range of -55 °C up to 0 °C: RT = R0 x (1 + A x T + B x T2 + C x (T - 100 °C) x T3) The tolerances values of the PTS AT series are classified by the following equations as specified by IEC 60751: And for the temperature range of 0 °C up to +175 °C: RT = R0 x (1 + A x T + B x T2) Class F0.3: TF0.3 = ± (0.3 + 0.005 x |T|) RT: Resistance as a function of temperature R0: Nominal resistance value at 0 °C T: Temperature in °C Class F0.6: TF0.6 = ± (0.6 + 0.010 x |T|) NOMINAL RESISTANCE VALUES AND TEMPERATURE TOLERANCE TEMPERATURE in °C -55 -50 -25 0 25 50 75 100 125 150 175 R0 = 100  78.319 80.306 90.192 100.00 109.73 119.40 128.99 138.51 147.95 157.33 166.63 NOMINAL RESISTANCE in  R0 = 500  R0 = 1000  391.59 783.19 401.53 803.06 450.96 901.92 500.00 1000.00 548.67 1097.35 596.99 1193.97 644.94 1289.87 692.53 1385.06 739.76 1479.51 786.63 1573.25 833.13 1666.27 TOLERANCE in K CLASS F0.3 CLASS F0.6 ± 0.58 ± 1.15 ± 0.55 ± 1.10 ± 0.43 ± 0.85 ± 0.30 ± 0.60 ± 0.43 ± 0.85 ± 0.55 ± 1.10 ± 0.68 ± 1.35 ± 0.80 ± 1.60 ± 0.93 ± 1.85 ± 1.05 ± 2.10 ± 1.18 ± 2.35 Ratio RT/R0 1.7 1.6 1.5 RT/R0 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 - 75 - 50 - 25 0 25 50 75 100 125 150 175 Temperature in °C Tolerances for ClassF0.3 and F0.6 2.4 1.2 F0.6 Temp. Tol. 1.1 2.0 1.0 F0.6 R0 Tol. 1.8 1.6 0.8 1.4 0.7 F0.3 Temp. Tol. 1.2 1.0 0.6 0.5 0.8 0.4 F0.3 R0 Tol. 0.6 0.4 0.2 0.0 - 75 0.9 R0 Tol. in ± % Temperature Tol. in ± °C 2.2 0.3 0.2 - 50 - 25 0 25 50 75 100 125 150 0.1 0.0 175 Temperature in °C Revision: 25-Jun-2019 Document Number: 28899 4 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000