TCED4100G

TCED2100/TCED4100 Vishay Semiconductors Optocoupler, Photodarlington Output, Dual Channel, High Gain FEATURES • Isolation materials according to UL94-VO • Pollution degree 2 (DIN/VDE 0110/resp. IEC 60664) • Climatic classification 55/100/21 (IEC 60068 part 1) C • Special construction: therefore, extra low coupling capacity of typical 0.2 pF, high common mode rejection E • Low temperature coefficient of CTR • Creepage current resistance according to VDE 0303/ IEC 60112 comparative tracking index: CTI ≥ 175 1 A C 8 PIN • Rated impulse VIOTM = 8 kV peak 16 PIN 17200 C voltage (transient overvoltage) • Isolation test voltage (partial discharge test voltage) Vpd = 1.6 kV peak V D E • Rated isolation VIOWM = 600 VRMS voltage • Rated recurring VIORM = 848 V peak DESCRIPTION The TCED2100/TCED4100 consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 8-pin (dual) or 16-pin (quad) plastic dual inline package. The elements are mounted on one leadframe providing a fixed distance between input and output for highest safety requirements. (RMS peak includes voltage DC) (repetitive) • Thickness though insulation ≥ 0.75 mm • Lead (Pb)-free component • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC APPLICATIONS • Switch-mode power supplies VDE STANDARDS • Line receiver These couplers perform safety functions according to the following equipment standards: • Computer peripheral interface • DIN EN 60747-5-5 Optocoupler for electrical safety requirements • Circuits for safe protective separation against electrical shock according to safety class II (reinforced isolation): - for appl. class I - IV at mains voltage ≤ 300 V - for appl. class I - III at mains voltage ≤ 600 V according to DIN EN 60747-5-5. • IEC 60950/EN 60950 Office machines (applied for reinforced isolation for mains voltage ≤ 400 VRMS) • VDE 0804 Telecommunication apparatus and data processing • IEC 60065 Safety for mains-operated household apparatus electronic and related • Microprocessor system interface AGENCY APPROVALS • UL1577, file no. E76222 system code U, double protection • CSA 22.2 bulletin 5A, double protection • DIN EN 60747-5-5 • BSI IEC 60950; IEC 60065 • FIMKO ORDER INFORMATION PART REMARKS TCED2100 CTR ≥ 600 %, DIP-8 TCED4100 CTR ≥ 600 %, DIP-16 www.vishay.com 804 For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83728 Rev. 1.6, 16-May-08 TCED2100/TCED4100 Optocoupler, Photodarlington Output, Dual Channel, High Gain Vishay Semiconductors (1) ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V Forward current IF 60 mA IFSM 1.5 A Pdiss 100 mW Tj 125 °C Collector emitter voltage VCEO 35 V Emitter collector voltage VECO 7 V mA tp ≤ 10 µs Forward surge current Power dissipation Junction temperature OUTPUT Collector current IC 80 ICM 100 mA Pdiss 150 mW Tj 125 °C tp/T = 0.5, tp ≤ 10 ms Collector peak current Power dissipation Junction temperature COUPLER Isolation test voltage (RMS) VISO 5000 VRMS Total power dissipation t = 1 min Ptot 250 mW Operating ambient temperature range Tamb - 40 to + 100 °C Storage temperature range Tstg - 55 to + 125 °C Tsld 260 °C 2 mm from case, t ≤ 10 s Soldering temperature (2) Notes (1) T amb = 25 °C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to wave profile for soldering conditions for throught hole devices. ELECTRICAL CHARACTERISTCS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. 1.4 UNIT INPUT Forward voltage IF = 20 mA VF 1.15 VR = 0 V, f = 1 MHz Cj 50 Collector emitter voltage IC = 1 mA VCEO 32 V Emitter collector voltage IE = 100 µA VECO 7 V VCE = 10 V, If = 0 A, E = 0 ICEO Junction capacitance V pF OUTPUT Collector ermitter cut-off current 15 100 nA COUPLER Collector emitter saturation voltage Cut-off frequency IF = 20 mA, IC = 5 mA VCEsat VCE = 5 V, IF = 10 mA, RL = 100 Ω fc 10 kHz f = 1 MHz Ck 0.3 pF Coupling capacitance 1 V Note Tamb = 25 °C, unless otherwise specified. Minimum and maximum values are tested requierements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO PARAMETER IC/IF Document Number: 83728 Rev. 1.6, 16-May-08 TEST CONDITION SYMBOL MIN. TYP. VCE = 2 V, IF = 1 mA CTR 600 800 For technical questions, contact: optocoupler.answers@vishay.com MAX. UNIT % www.vishay.com 805 TCED2100/TCED4100 Optocoupler, Photodarlington Output, Dual Channel, High Gain Vishay Semiconductors MAXIMUM SAFETY RATINGS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT IF 130 mA Pdiss 265 mW VIOTM 8 kV Tsi 150 °C INPUT Forward current OUTPUT Power dissipation COUPLER Rated impulse voltage Safety temperature Note According to DIN EN 60747-5-5 (see figure 1). This optocoupler is suitable for safe electrical isolation only within the safety ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits. INSULATION RATED PARAMETERS TEST CONDITION SYMBOL MIN. Partial discharge test voltage routine test PARAMETER 100 %, ttest = 1 s Vpd 1.6 kV Partial discharge test voltage lot test (sample test) tTr = 60 s, ttest = 10 s, (see figure 2) VIOTM 8 kV Vpd 1.3 kV VIO = 500 V RIO 1012 Ω VIO = 500 V, Tamb = 100 °C RIO 1011 Ω VIO = 500 V, Tamb = 150 °C (construction test only) RIO 109 Ω Insulation resistance MAX. UNIT VIOTM 300 P tot - Total Power Dissipation (mW) TYP. t1, t2 t3 , t4 ttest tstres Photodarlington Psi (mW) 250 200 = 1 to 10 s =1s = 10 s = 12 s VPd 150 VIOWM VIORM 100 IR-Diode Isi (mA) 50 0 0 0 14887 25 50 75 100 125 150 13930 Tamb - Ambient Temperature (°C) Fig. 1 - Derating Diagram t3 ttest t4 tTr = 60 s t1 t2 t stres t Fig. 2 - Test Pulse Diagram for Sample Test According to DIN EN 60747-5-5/DIN EN 60747-; IEC60747 SWITCHING CHARACTERISTICS TEST CONDITION SYMBOL Rise time PARAMETER VCC = 2 V, IC = 10 mA, RL = 100 Ω, (see figure 3) tr 300 µs Fall time VCC = 2 V, IC = 10 mA, RL = 100 Ω, (see figure 3) tf 250 µs www.vishay.com 806 MIN. For technical questions, contact: optocoupler.answers@vishay.com TYP. MAX. UNIT Document Number: 83728 Rev. 1.6, 16-May-08 TCED2100/TCED4100 Optocoupler, Photodarlington Output, Dual Channel, High Gain Vishay Semiconductors IF IF 0 0 + V CC IF tp IC t 100 % 90 % I C = 10 mA R G = 50 Ω tp = 0.01 T 10 % 0 t p = 50 s tr td Channel I Channel II 50 Ω RL 14779 Oscilloscope R I = 1 MΩ C I = 20 pF t on tp td tr t on (= td + tr) Pulse duration Delay time Rise time Turn-on time ts tf t off ts tf t off (= ts + tf) t Storage time Fall time Turn-off time 96 11698 Fig. 3 - Test Circuit, Non-Saturated Operation Fig. 4 - Switching Times TYPICAL CHARACTERISTICS Tamb = 25 °C, unless otherwise specified I F = 10 mA VF - Forward Voltage (V) 1.2 1.1 1.0 0.9 0.8 0 14389 40 60 80 100 Tamb - Ambient Temperature (°C) 1.5 CTR rel - Relative Current Transfer Ratio 1.3 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 20 Fig. 5 - Forward Voltage vs. Ambient Temperature VCE = 5 V I F = 1 mA 1.4 14391 0.5 - 30 - 20 - 10 0 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) Fig. 7 - Relative Current Transfer Ratio vs. Ambient Temperature 100 000 I CEO - Collector Dark Current, with Open Base (nA) 1000 I F - Forward Current (mA) 10 000 100 10 1 1000 V F - Forward Voltage (V) Fig. 6 - Forward Current vs. Forward Voltage Document Number: 83728 Rev. 1.6, 16-May-08 100 10 1 0.1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 14390 VCE = 10 V IF = 0 20 14392 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) Fig. 8 - Collector Dark Current vs. Ambient Temperature For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 807 TCED2100/TCED4100 Vishay Semiconductors Optocoupler, Photodarlington Output, Dual Channel, High Gain 1000 10 000 CTR - Current Transfer Ratio (%) IC - Collector Current (mA) VCE = 2 V 100 10 1 VCE = 2 V 1000 100 0.1 0.1 14393 1 10 I F - Forward Current (mA) 10 0.1 100 14396 Fig. 9 - Collector Current vs. Forward Current 1 10 I F - Forward Current (mA) 100 Fig. 12 - Current Transfer Ratio vs. Forward Current 100 I C - Collector Current (mA) I F = 2 mA 1 mA 10 0.5 mA 0.2 mA 1 0.1 mA 0.1 0.1 1 10 100 VCE - Collector Emitter Voltage (V) 14394 V CEsat - Collector Emitter Saturation Voltage (V) Fig. 10 - Collector Current vs. Collector Emitter Voltage 1.1 CTR = 200 % used 1.0 100 % 0.9 50 % 25 % 0.8 0.7 0.6 14395 1 10 100 I C - Collector Current (mA) Fig. 11 - Collector Emitter Saturation Voltage vs. Collector Current www.vishay.com 808 For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83728 Rev. 1.6, 16-May-08 TCED2100/TCED4100 Optocoupler, Photodarlington Output, Dual Channel, High Gain Vishay Semiconductors PACKAGE DIMENSIONS in millimeters < 9.8 7.62 nom. 4.4 ± 0.2 3.6 ± 0.1 9.5 ± 0.2 6.3 ± 0.1 3.3 0.25 ± 0.05 0.53 ± 0.05 9 ± 0.8 1.32 ± 0.05 2.54 nom. 3 x 2.54 = 7.62 8 7 6 5 1 2 3 4 Weight: ca. 0.55 g Creepage distance: > 6 mm Air path: > 6 mm after mounting on PC board technical drawings according to DIN specifications 14784 < 20 3.6 ± 0.1 7.62 nom. 6.3 ± 0.1 3.3 4.4 ± 0.2 19.7 ± 0.2 5 0.25 ± 0.0 0.53 ± 0.05 9 ± 0.8 1.32 ± 0.05 2.54 nom. 7 x 2.54 = 17.78 16 15 14 13 12 11 10 9 Weight: ca. 1.08 g Creepage distance: > 6 mm Air path: > 6 mm after mounting on PC board technical drawings according to DIN specifications 14783 1 Document Number: 83728 Rev. 1.6, 16-May-08 2 3 4 5 6 7 8 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 809 TCED2100/TCED4100 Vishay Semiconductors Optocoupler, Photodarlington Output, Dual Channel, High Gain OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 810 For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83728 Rev. 1.6, 16-May-08 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: TCED2100 TCED4100