TDSG1150, TDSG1160, TDSO1150, TDSO1160, TDSY1150
www.vishay.com
Vishay Semiconductors
Standard 7-Segment Display 7 mm
FEATURES
• Evenly lighted segments
• Grey package surface
• Untinted segments
• Luminous intensity categorized
• Yellow and green categorized for color
• Wide viewing angle
• Suitable for DC and high peak current
19235
DESCRIPTION
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
The TDS.11.. series are 7 mm character seven segment LED
displays in a very compact package.
APPLICATIONS
• Panel meters
The displays are designed for a viewing distance up to
3 m and available in four bright colors. The grey package
surface and the evenly lighted untinted segments provide an
optimum on-off contrast.
• Test- and measure-equipment
• Point-of-sale terminals
• Control units
All displays are categorized in luminous intensity groups.
That allows users to assemble displays with uniform
appearence. Typical applications include instruments, panel
meters, point-of-sale terminals and household equipment.
PRODUCT GROUP AND PACKAGE DATA
• Product group: display
• Package: 7 mm
Due to the design of 7 mm displays, a certain amount of
cross-talk between segments is unavoidable. This light
leakage becomes more noticeable as the brightness of the
operated
segments
increases.
However,
higher
environmental illumination, or a partially transparent cover,
may reduce this effect. Therefore, it's important to consider
this phenomenon during design-in and to validate suitability
for the particular application and all its operation modes.
• Product series: standard
• Angle of half intensity: ± 50°
PARTS TABLE
PART
LUMINOUS
INTENSITY
(μcd)
COLOR
at IF
(mA)
WAVELENGTH
(nm)
FORWARD
VOLTAGE
(V)
at IF
(mA)
MIN. TYP. MAX.
MIN.
at IF
(mA)
CIRCUITRY
MIN.
TYP.
MAX.
TDSO1150
Orange red
450
3000
-
10
612
-
625
10
-
TYP. MAX.
2
3
20
Common anode
TDSO1150-K
Orange red
1800
-
3600
10
612
-
625
10
-
2
3
20
Common anode
TDSO1150-KL (1) Orange red
1800
-
5600
10
612
-
625
10
-
2
3
20
Common cathode
TDSO1160
Orange red
450
3000
-
10
612
-
625
10
-
2
3
20
Common cathode
TDSO1160-KL
Orange red
1800
-
5600
10
612
-
625
10
-
2
3
20
Common cathode
TDSY1150 (1)
Yellow
450
3000
-
10
581
-
594
10
-
2.4
3
20
Common anode
TDSY1150-K (1)
Yellow
1800
-
3600
10
581
-
594
10
-
2.4
3
20
Common anode
TDSY1150-KL (1)
Yellow
1800
-
5600
10
581
-
594
10
-
2.4
3
20
Common anode
TDSG1150
Green
450
6000
-
10
562
-
575
10
-
2.4
3
20
Common anode
TDSG1150-LM
Green
2800
-
9000
10
562
-
575
10
-
2.4
3
20
Common anode
TDSG1160
Green
450
6000
-
10
562
-
575
10
-
2.4
3
20
Common cathode
TDSG1160-LM
Green
2800
-
9000
10
562
-
575
10
-
2.4
3
20
Common cathode
Note
(1) Not for new designs
Rev. 2.7, 06-Dec-2021
Document Number: 83124
1
For technical questions, contact: LED@Vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TDSG1150, TDSG1160, TDSO1150, TDSO1160, TDSY1150
www.vishay.com
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
TDSO1150, TDSO1160, TDSY1150, TDSG1150, TDSG1160
PARAMETER
SYMBOL
VALUE
Reverse voltage per segment or DP
VR
6
V
DC forward current per segment or DP
IF
17
mA
tp ≤ 10 μs (non repetitive)
IFSM
0.15
A
Tamb ≤ 45 °C
PV
400
mW
Surge forward current per segment or DP
Power dissipation
TEST CONDITION
Junction temperature
UNIT
Tj
100
°C
Operating temperature range
Tamb
-40 to +85
°C
Storage temperature range
Tstg
-40 to +85
°C
Tsd
260
°C
RthJA
140
K/W
Soldering temperature
t ≤ 3 s, 2 mm below seating plane
Thermal resistance LED junction to ambient
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TDSO1150, TDSO1150-K, TDSO1160, TDSO1160-KL, ORANGE RED
PARAMETER
Luminous intensity per segment
(digit average) (1)
TEST CONDITION
IF = 10 mA
PART
SYMBOL
MIN.
TYP.
MAX.
TDSO1150
IV
450
3000
-
TDSO1150-K
1800
-
3600
TDSO1150-KL (2)
1800
-
5600
TDSO1160
450
3000
-
TDSO1160-KL
Dominant wavelength
IF = 10 mA
Peak wavelength
IF = 10 mA
Angle of half intensity
IF = 10 mA
Forward voltage per segment or DP
IF = 20 mA
Reverse voltage per segment or DP
IR = 10 μA
TDSO1150,
TDSO1150-K,
TDSO1150-KL,
TDSO1160,
TDSO1160-KL
UNIT
μcd
1800
-
5600
λd
612
-
625
nm
λp
-
630
-
nm
j
-
± 50
-
°
VF
-
2
3
V
VR
6
15
-
V
Notes
(2) I
Vmin. and IV groups are mean values of all segments (a to g, D1 to D4), matching factor within segments is ≥ 0.5, excluding decimal points
and colon
(3) Not for new designs
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TDSY1150, TDSY1150-K, TDSY1150-KL, TDSO1160, YELLOW, NOT FOR NEW DESIGNS
PARAMETER
TEST CONDITION
PART
SYMBOL
TDSY1150
Luminous intensity per segment
(digit average) (1)
IF = 10 mA
TDSY1150-K
IV
TDSY1150-KL
MIN.
TYP.
MAX.
450
3000
-
1800
-
3600
1800
-
5600
UNIT
μcd
Dominant wavelength
IF = 10 mA
λd
581
-
594
nm
Peak wavelength
IF = 10 mA
λp
-
585
-
nm
Angle of half intensity
IF = 10 mA
j
-
± 50
-
°
Forward voltage per segment or DP
IF = 20 mA
VF
-
2.4
3
V
Reverse voltage per segment or DP
IR = 10 μA
VR
6
15
-
V
TDSY1150,
TDSY1150-K,
TDSY1150-KL
Note
(4) I
Vmin. and IV groups are mean values of all segments (a to g, D1 to D4), matching factor within segments is ≥ 0.5, excluding decimal points
and colon
Rev. 2.7, 06-Dec-2021
Document Number: 83124
2
For technical questions, contact: LED@Vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TDSG1150, TDSG1160, TDSO1150, TDSO1160, TDSY1150
www.vishay.com
Vishay Semiconductors
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TDSG1150, TDSG1150-LM, TDSG1160, GREEN
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
450
6000
-
2800
-
9000
450
6000
-
TDSG1150
Luminous intensity per segment
(digit average) (1)
IF = 10 mA
Dominant wavelength
IF = 10 mA
Peak wavelength
IF = 10 mA
Angle of half intensity
IF = 10 mA
Forward voltage per segment or DP
IF = 20 mA
Reverse voltage per segment or DP
IR = 10 μA
TDSG1150-LM
IV
TDSG1160
TDSG1160-LM
TDSG1150,
TDSG1150-LM,
TDSG1160,
TDSG1160-LM
UNIT
μcd
2800
-
9000
λd
562
-
575
nm
λp
-
565
-
nm
j
-
± 50
-
°
VF
-
2.4
3
V
VR
6
15
-
V
Note
(5) I
Vmin. and IV groups are mean values of all segments (a to g, D1 to D4), matching factor within segments is ≥ 0.5, excluding decimal points
and colon
LUMINOUS INTENSITY CLASSIFICATION
GROUP
LIGHT INTENSITY (μcd)
COLOR CLASSIFICATION
ORANGE RED
GROUP
YELLOW
GREEN
MIN.
MAX.
MIN.
MAX.
MIN.
MAX.
1
612
617
581
584
-
-
560
2
616
621
583
586
-
-
450
900
3
620
625
585
588
562
565
H
700
1400
4
-
-
587
590
564
567
569
STANDARD
MIN.
MAX.
E
180
360
F
280
G
I
1100
2200
5
-
-
589
592
566
K
1800
3600
6
-
-
591
594
568
571
L
2800
5600
7
-
-
-
-
570
573
M
4500
9000
8
-
-
-
-
572
575
N
7000
14 000
Note
• The above type numbers represent the order groups which
include only a few brightness groups. Only one group will be
shipped in one tube (there will be no mixing of two groups in one
tube).
In order to ensure availability, single brightness groups will not
be orderable
Note
• Wavelengths are tested at a current pulse duration of 25 ms and
an accuracy of ± 1 nm
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
0°
10°
20°
20
15
10
5
40°
1.0
0.9
50°
0.8
60°
0
0
20044
20
40
60
80
Fig. 1 - Forward Current vs. Ambient Temperature
Rev. 2.7, 06-Dec-2021
80°
0.6
100
Tamb - Ambient Temperature (°C)
70°
0.7
ϕ - Angular Displacement
30°
IV rel - Relative Luminous Intensity
IF - Forward Current (mA)
25
0.4
0.2
0
95 10082
Fig. 2 - Relative Luminous Intensity vs. Angular Displacement
Document Number: 83124
3
For technical questions, contact: LED@Vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TDSG1150, TDSG1160, TDSO1150, TDSO1160, TDSY1150
www.vishay.com
Vishay Semiconductors
1000
10
I V rel - Relative Luminous Intensity
I F - Forward Current (mA)
Orange Red
100
10
1
t p /T = 0.001
t p = 10 µs
0.1
0
2
4
6
8
1
0.1
0.01
10
VF - Forward Voltage (V)
18794
Orange Red
1
Fig. 3 - Forward Current vs. Forward Voltage
Fig. 6 - Relative Luminous Intensity vs. Forward Current
1.2
Orange Red
Orange Red
1.4
1.0
1.2
I rel - Relative Intensity
IVrel - Relative Luminous Intensity
1.6
1.0
0.8
0.6
0.4
IF = 10 mA
0.2
0.8
0.6
0.4
0.2
0.0
0
0
590
10 20 30 40 50 60 70 80 90 100
Tamb - Ambient Temperature (°C)
18795
630
650
690
670
λ - Wavelength (nm)
Fig. 7 - Relative Intensity vs. Wavelength
1000
2.4
Orange Red
2.0
IF - Forward Current (mA)
I V rel - Specific Luminous Intensity
610
17529
Fig. 4 - Relative Luminous Intensity vs. Ambient Temperature
1.6
1.2
0.8
0.4
yellow
100
tp/T = 0.001
tp = 10 µs
10
1
IFAV = 10 mA, const.
0
18796
100
10
IF - Forward Current (mA)
18797
0.1
10
20
50
1
0.5
0.2
100
0.1
200
500 IF (mA)
0.05
0.02
Fig. 5 - Relative Luminous Intensity vs.
Forward Current / Duty Cycle
Rev. 2.7, 06-Dec-2021
tp/T
0
95 10030
2
4
6
8
10
VF - Forward Voltage (V)
Fig. 8 - Forward Current vs. Forward Voltage
Document Number: 83124
4
For technical questions, contact: LED@Vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TDSG1150, TDSG1160, TDSO1150, TDSO1160, TDSY1150
www.vishay.com
Vishay Semiconductors
IV rel - Relative Luminous Intensity
1.6
1.2
yellow
yellow
Irel - Relative Intensity
1.0
1.2
0.8
0.4
IF = 10 mA
0
0
95 10031
20
60
80
0.4
0.2
100
Tamb - Ambient Temperature (°C)
550
570
590
610
650
630
λ - Wavelength (nm)
95 10039
Fig. 12 - Relative Intensity vs. Wavelength
1000
2.4
yellow
IF - Forward Current (mA)
Ispec - Specific Luminous Intensity
0.6
0
40
Fig. 9 - Relative Luminous Intensity vs. Ambient Temperature
2.0
1.6
1.2
0.8
0.4
10
1
20
0.5
50
0.2
100 200
0.1 0.05
IF (mA)
tp/T
500
0.02
Fig. 10 - Relative Luminous Intensity vs.
Forward Current / Duty Cycle
yellow
1
0.1
0.01
1
95 10033
10
1
2
4
6
8
10
VF - Forward Voltage (V)
Fig. 13 - Forward Current vs. Forward Voltage
1.6
green
1.2
0.8
0.4
IF = 10 mA
0
10
0
100
IF - Forward Current (mA)
Fig. 11 - Relative Luminous Intensity vs. Forward Current
Rev. 2.7, 06-Dec-2021
tp/T = 0.001
tp = 10 µs
95 10034
IV rel - Relative Luminous Intensity
10
green
100
0.1
0
0
95 10260
IV rel - Relative Luminous Intensity
0.8
95 10035
20
40
60
80
100
Tamb - Ambient Temperature (°C)
Fig. 14 - Relative Luminous Intensity vs. Ambient Temperature
Document Number: 83124
5
For technical questions, contact: LED@Vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TDSG1150, TDSG1160, TDSO1150, TDSO1160, TDSY1150
Vishay Semiconductors
1.2
2.4
green
green
1.0
2.0
Irel - Relative Intensity
Ispec - Specific Luminous Intensity
www.vishay.com
1.6
1.2
0.8
0.4
0.6
0.4
0.2
0
0
10
20
50
100
200
95 10263 1
0.5
0.2
0.1
0.05
500 IF (mA)
0.02 tp/T
Fig. 15 - Specific Luminous Intensity vs. Forward Current
IV rel - Relative Luminous Intensity
0.8
520
540
560
580
620
600
λ - Wavelength (nm)
95 10038
Fig. 17 - Relative Intensity vs. Wavelength
10
green
10
9
8
7
6
a
1
b
f
g
0.1
e
c
DP
d
1
95 10037
10
100
2
3
4
5
e
d
A(C)
c
DP
b
a
A(C)
g
f
96 11677
IF - Forward Current (mA)
Fig. 16 - Relative Luminous Intensity vs. Forward Current
Rev. 2.7, 06-Dec-2021
1
1
2
3
4
5
6
7
8
9
10
Fig. 18 - TDS.11..
Document Number: 83124
6
For technical questions, contact: LED@Vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TDSG1150, TDSG1160, TDSO1150, TDSO1160, TDSY1150
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS FOR TDS.11.. in millimeters
Drawing-No.: 6.544-5083.01-4
Issue: 1; 21.11.95
95 11342
Rev. 2.7, 06-Dec-2021
Document Number: 83124
7
For technical questions, contact: LED@Vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VISHAY
Display-7 mm
Vishay Semiconductors
Display-7 mm
Package Dimensions in mm
95 11342
Document Number 83923
Rev. 1.1, 08-Mar-04
www.vishay.com
1
Display-7 mm
VISHAY
Vishay Semiconductors
Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and
operatingsystems with respect to their impact on the health and safety of our employees and the public, as
well as their impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are
known as ozone depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs
and forbid their use within the next ten years. Various national and international initiatives are pressing for an
earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the
use of ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments
respectively
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency (EPA) in the USA
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting
substances and do not contain such substances.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each
customer application by the customer. Should the buyer use Vishay Semiconductors products for any
unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all
claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal
damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423
www.vishay.com
2
Document Number 83923
Rev. 1.1, 08-Mar-04
Pin Connections 7 mm
VISHAY
Vishay Semiconductors
Pin Connections 7 mm
10
9
8
7
6
a
b
f
g
e
c
DP
d
1
2
3
Document Number 83992
Rev. 1.1, 07-Jul-04
4
5
1
2
3
4
5
6
7
8
9
10
e
d
A(C)
c
DP
b
a
A(C)
g
f
96 11677
www.vishay.com
1
Pin Connections 7 mm
VISHAY
Vishay Semiconductors
Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and
operatingsystems with respect to their impact on the health and safety of our employees and the public, as
well as their impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are
known as ozone depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs
and forbid their use within the next ten years. Various national and international initiatives are pressing for an
earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the
use of ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments
respectively
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency (EPA) in the USA
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting
substances and do not contain such substances.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each
customer application by the customer. Should the buyer use Vishay Semiconductors products for any
unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all
claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal
damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423
www.vishay.com
2
Document Number 83992
Rev. 1.1, 07-Jul-04
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000