VLMK3100-GS08

VLMK3100, VLMK3102, VLMK3105 www.vishay.com Vishay Semiconductors Standard SMD LED PLCC-2 FEATURES • SMD LED with exceptional brightness • Luminous intensity categorized • Compatible equipment with automatic placement • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 19225 DESCRIPTION • Available in 8 mm tape This device has been designed to meet the increasing demand for AlInGaP technology. • Low profile package The package of the VLMK310. is the PLCC-2 (equivalent to a size B tantalum capacitor). It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. PRODUCT GROUP AND PACKAGE DATA • Non-diffused lens: excellent for coupling to light pipes and backlighting • Low power consumption • Luminous intensity IVmax./IVmin. ≤ 1.6 ratio in one packaging unit • Preconditioning according to JEDEC® level 2a • Product group: LED • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B • Package: SMD PLCC-2 • AEC-Q101 qualified • Product series: standard • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 • Angle of half intensity: ± 60° APPLICATIONS • Automotive: backlighting in dashboards and switches • Telecommunication: telephone and fax indicator and backlighting in • Indicator and backlight for audio and video equipment • Indicator and backlight in office equipment • Flat backlight for LCDs, switches, and symbols • General use PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) at IF (mA) WAVELENGTH (nm) TYP. MAX. FORWARD VOLTAGE at IF (V) TECHNOLOGY (mA) MIN. TYP. MAX. MIN. TYP. MAX. VLMK3100-GS08 Red 11.2 50 - 10 - 630 - 10 - 1.9 2.6 20 AllnGaP on GaAs VLMK3102-GS08 Red 22.4 43 56 10 - 630 - 10 - 1.9 2.6 20 AllnGaP on GaAs VLMK3105-GS08 Red 35.5 50 90 10 - 630 - 10 - 1.9 2.6 20 AllnGaP on GaAs Rev. 1.9, 14-Sep-2022 MIN. at IF (mA) Document Number: 81230 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMK3100, VLMK3102, VLMK3105 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMK310. PARAMETER TEST CONDITION SYMBOL VALUE VR 5 V Tamb ≤ 85 °C IF 30 mA tp ≤ 10 μs IFSM 0.7 A mW Reverse voltage (1) DC forward current Surge forward current UNIT Power dissipation PV 80 Junction temperature Tj 125 °C Tamb -40 to +100 °C Storage temperature range Tstg -40 to +100 °C Thermal resistance junction to ambient Mounted on PC board (pad size > 16 mm2) RthJA 400 K/W Operating temperature range Note (1) Driving LED in reverse direction is suitable for short term application OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMK310., RED PARAMETER TEST CONDITION Luminous intensity (1) IF = 10 mA PART SYMBOL MIN. TYP. MAX. UNIT VLMK3100 IV 11.2 50 - mcd VLMK3102 IV 22.4 43 56 mcd VLMK3105 IV 35.5 50 90 mcd Dominant wavelength IF = 10 mA λd - 630 - nm Peak wavelength IF = 10 mA λp - 643 - nm Angle of half intensity IF = 10 mA ϕ - ± 60 - ° Forward voltage IF = 20 mA VF - 1.9 2.6 V IR = 10 μA VR 5 - - V VR = 0 V, f = 1 MHz Cj - 15 - pF Reverse voltage Junction capacitance Note (1) In one packing unit I Vmax./IVmin. ≤ 1.6 LUMINOUS INTENSITY CLASSICIATION GROUP STANDARD LIGHT INTENSITY (mcd) Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable OPTIONAL MIN. MAX. 1 11.2 14.0 2 14.0 18.0 1 18.0 22.4 2 22.4 28.0 1 28.0 35.5 2 35.5 45.0 1 45.0 56.0 2 56.0 71.0 1 71.0 90.0 2 90.0 112.0 VISHAY OSRAM 1 112.0 140.0 VLMK3100 LST676 2 140.0 180.0 VLMK3102 LST676 VLMK3105 LST676 L M N P Q R Rev. 1.9, 14-Sep-2022 CROSSING TABLE Document Number: 81230 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMK3100, VLMK3102, VLMK3105 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.2 40 1.0 Irel - Relative Intensity IF - Forward Current (mA) 35 30 25 20 15 10 0.8 0.6 0.4 0.2 5 0 0 10 20 30 40 50 60 70 80 0.0 600 90 100 Tamb - Ambient Temperature (°C) 16615 620 640 660 680 700 λ - Wavelength (nm) 96 12075 Fig. 4 - Relative Intensity vs. Wavelength Fig. 1 - Maximum Permissible Forward Current vs. Ambient Temperature 100 1000.00 IF - Forward Current (mA) 0.02 0.05 0.1 100.00 0.2 0.5 1 10.00 0.01 1.00 10.00 100.00 1 tp - Pulse Length (ms) 16622 0° 10° 1.0 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement 30° 0.9 80° 0.4 0.2 0 95 10319 Fig. 3 - Relative Luminous Intensity vs. Angular Displacement Rev. 1.9, 14-Sep-2022 2.5 3 10 1 0.1 0.01 1 0.6 2 Fig. 5 - Forward Current vs. Forward Voltage 20° 40° 1.5 VF - Forward Voltage (V) 95 10878 Fig. 2 - Permissible Forward Current vs. Pulse Length IV rel - Relative Luminous Intensity 10 1 0.10 IV rel - Relative Luminous Intensity I FM - Forward Current (mA) tp /T = 0.01 9611588 10 100 IF - Forward Current (mA) Fig. 6 - Relative Luminous Intensity vs. Forward Current Document Number: 81230 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMK3100, VLMK3102, VLMK3105 Ispec - Specific Luminous Intensity www.vishay.com Vishay Semiconductors 2.0 1.6 1.2 0.8 0.4 0.0 96 11589 1 2 5 1 0.5 0.2 10 20 0.1 0.05 50 IF (mA) 0.02 tp/T Fig. 7 - Specific Luminous Intensity vs. Forward Current / Duty Cycle 2.0 IVrel - Relative Luminous Intensity 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) 16618 Fig. 8 - Relative Luminous Intensity vs. Ambient Temperature V Frel - Relative Forward Voltage 2.10 2.05 IF = 20 mA Red 2.00 1.95 1.90 1.85 1.80 1.75 1.70 1.65 1.60 0 10 16617 20 30 40 50 60 70 80 90 100 Tam b - Ambient Temperature (°C) Fig. 9 - Forward Voltage vs. Ambient Temperature Rev. 1.9, 14-Sep-2022 Document Number: 81230 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMK3100, VLMK3102, VLMK3105 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 0.9 1.75 ± 0.1 3.5 ± 0.2 0.8 technical drawings according to DIN specifications C A 2.2 2.8 ± 0.15 Pin identification Drawing-No.: 6.541-5067.01-4 Issue: 7; 12.03.14 Ø 2.4 3 + 0.15 Area covered with solderresist 4 2.6 (2.8) Recommended Footprint Mounting Pad Layout 1.2 1.6 (1.9) Rev. 1.9, 14-Sep-2022 4 Document Number: 81230 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMK3100, VLMK3102, VLMK3105 www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM3-SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 10.4 8.4 120° 4.5 3.5 Adhesive tape 13.00 12.75 2.5 1.5 62.5 60.0 Identification Label: Vishay type group tape code production code quantity Blister tape Component cavity 14.4 max. 321 329 18857 94 8670 Fig. 12 - Reel Dimensions - GS18 TAPING OF VLM.3.. SOLDERING PROFILE 3.5 3.1 2.2 2.0 IR Reflow Soldering Profile for Lead (Pb)-free Soldering Preconditioning acc. to JEDEC level 2a 300 3.6 3.4 4.0 3.6 8.3 7.7 1.85 1.65 1.6 1.4 4.1 3.9 0.25 4.1 3.9 2.05 1.95 max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 Temperature (°C) 5.75 5.25 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 94 8668 0 Fig. 10 - Tape Dimensions in mm for PLCC-2 0 REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 100 150 Time (s) 200 250 300 max. 2 cycles allowed 19885-3 Fig. 13 - Vishay Lead (Pb)-free Reflow Soldering Profile (according to J-STD-020) TTW Soldering (according to CECC00802) 10.0 9.0 120° 50 300 10000 5s Lead temperature 63.5 60.5 Identification Label: Vishay type group tape code production code quantity 200 235 °C to 260 °C First wave 100 °C to 130 °C 100 100 2 K/s 50 180 178 ca. 5 K/s Forced cooling 14.4 max. Fig. 11 - Reel Dimensions - GS08 Rev. 1.9, 14-Sep-2022 1000 ca. 2 K/s ca. 200 K/s 150 Full line: typical Dotted lines: process limits Second wave 1st line 2nd line 2.5 1.5 13.00 12.75 2nd line Temperature (°C) 250 4.5 3.5 10 0 94 8665 0 948626-1 50 100 150 200 250 Time (s) Document Number: 81230 6 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMK3100, VLMK3102, VLMK3105 www.vishay.com Vishay Semiconductors Fig. 14 - Double Wave Soldering of Opto Devices (all Packages) BAR CODE PRODUCT LABEL (example) N A RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C B C D E • Storage humidity ≤ 60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering. F G H I K L In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: M A. 2D barcode 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. B. Part No: Vishay part number C. QTY: quantity D. SelCode: selection bin code E. Country of origin An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. F. PTC: production plant code G. Termination finish H. Region code L E V E L CAUTION I. Serial#: serial number K. Batch number: year, week, country code, plant code L. SL: storage location M. Environmental halogen-free symbols: This bag contains MOISTURE –SENSITIVE DEVICES 2a 1. Shelf life in sealed bag 12 months at