VLMTG41S2U1-GS18

VLMTG41S2U1 www.vishay.com Vishay Semiconductors Standard SMD LED PLCC-2 FEATURES • High efficient InGaN technology • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 • Available in 8 mm tape reel • Preconditioning according to JEDEC® level 2a 19225 • AEC-Q101 qualified DESCRIPTION • ESD-withstand voltage: Up to 2 kV HBM according to JESD22-A114-B This device has been designed to meet the increasing demand for InGaN true green SMD LED. The package of the VLMTG41.. is the PLCC-2. • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled with clear epoxy. APPLICATIONS PRODUCT GROUP AND PACKAGE DATA • Telecommunication: telephone and fax • Automotive: Backlighting in dashboards and switches • Product group: LED Indicator and backlighting in • Backlighting for audio and video equipment • Package: SMD PLCC-2 • Backlighting in office equipment • Product series: standard • Indoor and outdoor message boards • Angle of half intensity: ± 60° • Flat backlight for LCDs, switches, and symbols • Illumination purposes, alternative to incandescent lamps • General use PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) at IF (mA) MIN. TYP. MAX. WAVELENGTH (nm) FORWARD VOLTAGE (V) at IF (mA) MIN. TYP. MAX. at IF (mA) TECHNOLOGY MIN. TYP. MAX. VLMTG41S2U1-GS08 True green 224 380 560 10 515 530 541 10 - 3.2 4.2 20 InGaN on Sapphire VLMTG41S2U1-GS18 True green 224 380 560 10 515 530 541 10 - 3.2 4.2 20 InGaN on Sapphire ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)  VLMTG41.. PARAMETER DC forward current Surge forward current TEST CONDITION SYMBOL VALUE UNIT Tamb  80 °C IF 20 mA tp  10 μs IFSM 0.1 A PV 84 mW Power dissipation Junction temperature Storage temperature range Operating temperature range Thermal resistance junction/ambient Mounted on PC board (pad size > 16 mm2) Tj 110 °C Tstg -40 to +100 °C Tamb -40 to +100 °C RthJA 360 K/W   Rev. 1.2, 02-Oct-13 Document Number: 83377 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMTG41S2U1 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)  VLMTG41.., TRUE GREEN PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity IF = 10 mA VLMTG41S2U1 IV 224 380 560 mcd Dominant wavelength IF = 10 mA d 515 530 541 nm Peak wavelength IF = 10 mA p - 520 - nm Angle of half intensity IF = 10 mA  - ± 60 - deg Forward voltage IF = 20 mA VF - 3.2 4.2 V Temperature coefficient of VF IF = 10 mA TCVF - -4 - mV/K Temperature coefficient of IV IF = 10 mA TCIV - -0.25 - %/K Note • Not designed for reverse operation LUMINOUS INTENSITY CLASSIFICATION GROUP COLOR CLASSIFICATION LIGHT INTENSITY (mcd) STANDARD S OPTIONAL 2 1 2 1 T U MIN. 224 280 355 450 TRUE GREEN MAX. 280 355 450 560 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. These type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups are not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups are not be orderable. GROUP DOM. WAVELENGTH (nm) MIN. MAX. 3 515 523 4 521 529 5 527 535 6 533 541 Note • Wavelengths are tested at a current pulse duration of 25 ms. CROSSING TABLE VISHAY OSRAM VLMTG41S2U1 LTT67CS2U1 TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 0° 10 0 0 20913 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 1 - Forward Current vs. Ambient Temperature Rev. 1.2, 02-Oct-13 10° 20° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement 20 IV rel - Relative Luminous Intensity IF - Forward Current (mA) 30 80° 0.6 0.4 0.2 0 95 10319 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Document Number: 83377 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMTG41S2U1 www.vishay.com Vishay Semiconductors 10 1.2 Δλdom - Shift of Dominant Wavelength (nm) true green Irel - Relative Intensity 1.0 0.8 0.6 0.4 0.2 0.0 460 16068 -5 - 10 620 0 20 40 60 80 100 IF - Forward Current (mA) 22429 Fig. 6 - Shift of Dominant Wavelength vs. Forward Current 3.8 VF - Forward Voltage (V) 100 IF - Forward Current (mA) 0 - 15 500 540 580 λ - Wavelength (nm) Fig. 3 - Relative Luminous Intensity vs. Wavelength 10 1 2.0 2.5 3.0 3.5 4.0 3.6 3.4 3.2 3.0 2.8 - 40 - 20 4.5 VF - Forward Voltage (V) 22427 1 20 40 60 80 100 Fig. 7 - Forward Voltage vs. Ambient Temperature IV rel - Relative Luminous Intensity 10 0 Tamb - Ambient Temperature (°C) 22430 Fig. 4 - Forward Current vs. Forward Voltage IV rel - Relative Luminous Intensity 5 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0.1 1 22428 10 IF - Forward Current (mA) Fig. 5 - Relative Luminous Intensity vs. Forward Current Rev. 1.2, 02-Oct-13 - 40 - 20 100 22431 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 8 - Relative Luminous Intensity vs. Ambient Temperature Document Number: 83377 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMTG41S2U1 www.vishay.com Vishay Semiconductors Δλdom - Shift of Dominant Wavelength (nm) 6 4 2 0 -2 -4 -6 - 40 - 20 22432 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 9 - Shift of Dominant Wavelength vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters 0.9 1.75 ± 0.1 3.5 ± 0.2 0.8 A C technical drawings according to DIN specifications 2.2 2.8 ± 0.15 Pin identification Dimensions in mm Ø 2.4 3 + 0.15 area covered with solderresist Mounting Pad Layout 4 2.6 (2.8) 1.2 1.6 (1.9) 4 Dimensions: reflow and vapor phase (wave soldering) A Protection Diode C Rev. 1.2, 02-Oct-13 20242 Document Number: 83377 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMTG41S2U1 www.vishay.com Vishay Semiconductors METHOD OF TAPING/POLARITY AND TAPE AND REEL SMD LED (VLM.3..., VLM.4...-SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18  (= 8000 PCS.) PREFERRED 10.4 8.4 120° 4.5 3.5 13.00 12.75 2.5 1.5 Adhesive tape 62.5 60.0 Identification Label: Vishay type group tape code production code quantity Blister tape 14.4 max. 321 329 18857 Fig. 12 - Reel Dimensions - GS18 Component cavity 94 8670 SOLDERING PROFILE TAPING OF VLM.3..., VLM.4... 3.5 3.1 IR Reflow Soldering Profile for Lead (Pb)-free Soldering 2.2 2.0 Preconditioning acc. to JEDEC level 2a 300 8.3 7.7 1.85 1.65 1.6 1.4 4.1 3.9 Temperature (°C) 3.6 3.4 4.0 3.6 max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 5.75 5.25 200 max. 30 s 150 max. 100 s max. 120 s 100 0.25 4.1 3.9 94 8668 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 2.05 1.95 0 0 50 100 Fig. 10 - Tape Dimensions in mm for PLCC-2 150 Time (s) 200 REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08  (= 1500 PCS.) 250 300 max. 2 cycles allowed 19885 Fig. 13 - Vishay Lead (Pb)-free Reflow Soldering Profile (acc. to J-STD-020) TTW Soldering (acc. to CECC00802) 300 10.0 9.0 120° 5s 4.5 3.5 2.5 1.5 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity Temperature (°C) 250 235 °C to 260 °C first wave 200 lead temperature second full line: typical wave dotted line: process limits ca. 200 K/s 150 100 °C to 130 °C ca. 2 K/s 100 2 K/s ca. 5 K/s 50 forced cooling 0 180 178 Fig. 11 - Reel Dimensions - GS08 Rev. 1.2, 02-Oct-13 0 14.4 max. 948626-1 94 8665 50 100 150 200 250 Time (s) Fig. 14 - Double Wave Soldering of Opto Devices (all Packages) Document Number: 83377 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMTG41S2U1 www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 106 A RECOMMENDED METHOD OF STORAGE H • Storage temperature 10 °C to 30 °C VISHAY 37 • Storage humidity  60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering. B C D E F G 20216 A. Type of component B. Manufacturing plant C. SEL - selection code (bin): e.g.: R1 = code for luminous intensity group 5L = code for chrom. coordinate group In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C/- 0 °C and < 5 % RH (dry air/nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. D. Date code year/week E. Day code (e.g. 4: Thursday) F. Batch no. L E V E L CAUTION G. Total quantity This bag contains MOISTURE –SENSITIVE DEVICES H. Company code 2a 1. Shelf life in sealed bag 12 months at