VLMW41R1T1-7K8L-08

VLMW41R1T1-7K8L www.vishay.com Vishay Semiconductors Standard SMD LED PLCC-2 FEATURES • High efficient InGaN technology • Chromaticity coordinate categorized according to CIE1931 per packing unit • Typical color temperature 5000 K • EIA and ICE standard package • Compatible with reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 19225 DESCRIPTION • Available in 8 mm tape reel This device has been designed to meet the increasing demand for white SMD LED. • Preconditioning according to JEDEC® level 2a The package of the VLMW41.. is the PLCC-2. • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled with a mixture of epoxy and TAG phosphor. • Luminous intensity IVmax./IVmin. ≤ 1.6 ratio in one packing unit • AEC-Q101 qualified The TAG phosphor converts the blue emission partially to yellow, which mixes with the remaining blue to give white. • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRODUCT GROUP AND PACKAGE DATA APPLICATIONS • Product group: LED • Camera flash light • Package: SMD PLCC-2 • Signal and symbol luminaire • Product series: standard • Marker lights • Angle of half intensity: ± 60° • Interior and exterior automotive lighting: brake lights, turn lights, backlighting, side markers • Indicator lighting PARTS TABLE PART LUMINOUS INTENSITY (mcd) COLOR at IF (mA) MIN. TYP. MAX. VLMW41R1T1-7K8L-08 White 112 275 355 COORDINATE (x, y) MIN. 10 - FORWARD VOLTAGE (V) at IF (mA) TYP. MAX. 0.345, 0.352 - at IF TECHNOLOGY (mA) MIN. TYP. MAX. 10 - 3.3 4.2 20 InGaN / TAG on Sapphire ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMW41.. PARAMETER DC forward current Surge forward current TEST CONDITION SYMBOL VALUE UNIT Tamb ≤ 80 °C IF 20 mA tp ≤ 10 μs IFSM 0.1 A PV 84 mW Power dissipation Junction temperature Storage temperature range Operating temperature range Thermal resistance junction / ambient Rev. 1.3, 22-Mar-16 Mounted on PC board (pad size > 16 mm2) Tj 110 °C Tstg -40 to +100 °C Tamb -40 to +100 °C RthJA 360 K/W Document Number: 81190 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW41R1T1-7K8L www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMW41.., WHITE TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity PARAMETER IF = 10 mA VLMW41R1T1 IV 112 275 355 mcd - Chromaticity coordinate x acc. to CIE 1931 IF = 10 mA x - 0.345 Chromaticity coordinate y acc. to CIE 1931 IF = 10 mA y - 0.352 - Angle of half intensity IF = 10 mA ϕ - ± 60 - Forward voltage IF = 20 mA VF - 3.3 4.2 V Temperature coefficient of VF IF = 10 mA TCVF - -3 - mV/K Temperature coefficient of IV IF = 10 mA TCIV - -0.4 - %/K deg Note • Not designed for reverse operation LUMINOUS INTENSITY CLASSIFICATION GROUP LIGHT INTENSITY (mcd) STANDARD CHROMATICITY COORDINATED GROUPS FOR WHITE SMD LED OPTIONAL MIN. MAX. X Y 1 112 140 0.330 0.330 2 140 180 0.330 0.347 1 180 224 0.347 0.371 2 224 280 0.345 0.352 1 280 355 0.330 0.310 0.330 0.330 0.338 0.342 0.352 0.344 0.345 0.352 0.347 0.371 0.367 0.401 0.364 0.380 0.352 0.344 0.338 0.342 0.364 0.380 0.360 0.357 R S T Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups are not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups are not be orderable. 7L 7K 8L 8K CROSSING TABLE VISHAY OSRAM VLMW41.. LWT67C.. Note • Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of ± 0.01. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 0° 10 0 0 20913 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 1 - Forward Current vs. Ambient Temperature Rev. 1.3, 22-Mar-16 10° 20° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement 20 IV rel - Relative Luminous Intensity IF - Forward Current (mA) 30 80° 0.6 0.4 0.2 0 95 10319 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Document Number: 81190 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW41R1T1-7K8L www.vishay.com Vishay Semiconductors f - Chromaticity Coordinate Shift (x,y) 100 90 Irel - Relative Intensity 80 70 60 50 40 30 20 10 0 400 450 500 550 600 650 700 750 0.325 Y 0.275 0.250 0 IV rel - Relative Luminous Intensity IF - Forward Current (mA) 30 40 50 1.5 10 1.4 1.3 1.2 1.1 1 0.9 0.8 0.7 0.6 0.5 3.0 3.5 4.0 4.5 -40 VF - Forward Voltage (V) -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 20914 Fig. 4 - Forward Current vs. Forward Voltage Fig. 7 - Relative Luminous Intensity vs. Ambient Temperature 3.7 VF - Forward Voltage (V) 10 IV rel - Relative Luminous Intensity 20 IF - Forward Current (mA) Fig. 6 - Chromaticity Coordinate Shift vs. Forward Current 100 20217 10 20220 Fig. 3 - Relative Intensity vs. Wavelength 1 2.5 X 0.300 800 λ - Wavelength (nm) 16196 0.350 1 0.1 3.6 3.5 3.4 3.3 3.2 3.1 0.01 1 20219 3 10 IF - Forward Current (mA) 100 Fig. 5 - Relative Luminous Intensity vs. Forward Current Rev. 1.3, 22-Mar-16 -40 20915 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 8 - Forward Voltage vs. Ambient Temperature Document Number: 81190 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW41R1T1-7K8L www.vishay.com Vishay Semiconductors 0.40 8L 8K y-Coordinates 0.35 7L 7K 6L 6K 0.30 5L 5K 0.25 0.20 0.25 0.27 19784_3 0.29 0.31 0.33 0.35 0.37 x-Coordinates Fig. 9 - Coordinates of Colorgroups PACKAGE DIMENSIONS in millimeters technical drawings according to DIN specifications 0.9 1.75 ± 0.1 3.5 ± 0.2 Pin identification Mounting Pad Layout 4 A area covered with solder resist 2.6 (2.8) C 2.2 2.8 ± 0.15 1.2 4 1.6 (1.9) Ø 2.4 3 + 0.15 Drawing-No.: 6.541-5067.01-4 Issue: 5; 04.11.08 20541 A Protection Diode C Rev. 1.3, 22-Mar-16 20242 Document Number: 81190 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW41R1T1-7K8L www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SOLDERING PROFILE IR Reflow Soldering Profile for Lead (Pb)-free Soldering SMD LED (VLM.3..., VLM.4... - SERIES) Preconditioning acc. to JEDEC level 2a Adhesive tape 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 Blister tape max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 Temperature (°C) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. 300 0 0 50 100 150 Time (s) 200 250 300 max. 2 cycles allowed 19885 Fig. 12 - Vishay Lead (Pb)-free Reflow Soldering Profile (acc. to J-STD-020) Component cavity 94 8670 TTW Soldering (acc. to CECC00802) TAPING OF VLM.3..., VLM.4... 300 5s 3.5 3.1 2.2 2.0 5.75 5.25 3.6 3.4 4.0 3.6 8.3 7.7 Temperature (°C) 250 235 °C to 260 °C first wave 200 lead temperature second full line: typical wave dotted line: process limits ca. 200 K/s 150 100 °C to 130 °C ca. 2 K/s 100 2 K/s ca. 5 K/s 50 1.85 1.65 1.6 1.4 4.1 3.9 forced cooling 0.25 4.1 3.9 0 0 2.05 1.95 948626-1 50 100 150 200 250 Time (s) 94 8668 Fig. 10 - Tape Dimensions in mm for PLCC-2 Fig. 13 - Double Wave Soldering of Opto Devices (all Packages) REEL PACKAGE DIMENSIONS IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 10.0 9.0 120° 4.5 3.5 2.5 1.5 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity 180 178 14.4 max. 94 8665 Fig. 11 - Reel Dimensions - GS08 Rev. 1.3, 22-Mar-16 Document Number: 81190 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW41R1T1-7K8L www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 106 A RECOMMENDED METHOD OF STORAGE H • Storage temperature 10 °C to 30 °C VISHAY 37 • Storage humidity ≤ 60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering. B C D E F 20216 G A) Type of component B) Manufacturing plant C) SEL - selection code (bin): e.g.: R1 = code for luminous intensity group 5L = code for chrom. coordinate group In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. D) Date code year / week E) Day code (e.g. 4: Thursday) F) Batch no. G) Total quantity L E V E L CAUTION 2a H) Company code This bag contains MOISTURE –SENSITIVE DEVICES DRY PACKING 1. Shelf life in sealed bag 12 months at