VLMW41S1T1-8K8L-08

VLMW41.. www.vishay.com Vishay Semiconductors Standard SMD LED PLCC-2 FEATURES • High efficient InGaN technology • Chromaticity coordinate categorized according to CIE1931 per packing unit • Typical color temperature 5500 K • EIA and ICE standard package • Compatible with reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 19225 DESCRIPTION • Available in 8 mm tape reel This device has been designed to meet the increasing demand for white SMD LED. • Preconditioning according to JEDEC® level 2a • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B The package of the VLMW41.. is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled with a mixture of epoxy and TAG phosphor. • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 The TAG phosphor converts the blue emission partially to yellow, which mixes with the remaining blue to give white. APPLICATIONS • Camera flash light PRODUCT GROUP AND PACKAGE DATA • Signal and symbol luminaire • Product group: LED • Marker lights • Package: SMD PLCC-2 • Product series: standard • Interior and exterior automotive lighting: brake lights, turn lights, backlighting, side markers • Angle of half intensity: ± 60° • Indicator lighting PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) at IF (mA) MIN. TYP. MAX. COORDINATE (x, y) FORWARD VOLTAGE (V) at IF (mA) MIN. TYP. MAX. at IF TECHNOLOGY (mA) MIN. TYP. MAX. VLMW41S1T1-5K8L-08 White 180 275 355 10 - 0.33, 0.33 VLMW41S1T1-5K8L-18 White 180 275 355 10 - 0.33, 0.33 - 10 - 3.3 4.2 10 InGaN / TAG on sapphire VLMW41R1T1-5K8L-08 White 112 275 355 10 - 0.33, 0.33 - 10 - 3.3 4.2 10 InGaN / TAG on sapphire VLMW41R1T1-5K8L-18 White 112 275 355 10 - 0.33, 0.33 - 10 - 3.3 4.2 10 InGaN / TAG on sapphire VLMW41S1T2-7K8L-08 White 180 275 450 10 - 0.33, 0.33 - 10 - 3.3 4.2 10 InGaN / TAG on sapphire Rev. 2.1, 18-Oct-2022 - 10 - 3.3 4.2 10 InGaN / TAG on sapphire Document Number: 81370 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW41.. www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMW41.. PARAMETER TEST CONDITION SYMBOL VALUE UNIT Tamb ≤ 80 °C IF 20 mA tp ≤ 10 μs IFSM 0.1 A PV 84 mW DC forward current Surge forward current Power dissipation Junction temperature Tj 110 °C Tstg -40 to +100 °C Tamb -40 to +100 °C RthJA 360 K/W Storage temperature range Operating temperature range Thermal resistance junction to ambient Mounted on PC board (pad size > 16 mm2) OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMW41.., WHITE PARAMETER TEST CONDITION Luminous intensity IF = 10 mA PART SYMBOL MIN. TYP. MAX. UNIT VLMW41R1T1 IV 112 275 355 mcd VLMW41S1T1 IV 180 275 355 mcd VLMW41S1T2 IV 180 275 450 mcd Chromatically coordinate x acc. to CIE 1931 IF = 10 mA VLMW41.. x - 0.33 - Chromatically coordinate y acc. to CIE 1931 IF = 10 mA VLMW41.. y - 0.33 - Angle of half intensity IF = 10 mA ϕ - ± 60 - ° Forward voltage IF = 20 mA VF - 3.3 4.2 V Temperature coefficient of VF IF = 10 mA TCVF - -3 - mV/K Temperature coefficient of IV VR = 5 V TCIV - -0.4 - %/K Note • Not designed for reverse operation LUMINOUS INTENSITY CLASSIFICATION GROUP LUMINOUS INTENSITY (mcd) OPTIONAL MIN. MAX. 1 112 140 2 140 180 1 180 224 2 224 280 1 280 355 2 355 450 R S T CROSSING TABLE VISHAY OSRAM VLMW41.. LWT67C.. Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one reel. In order to ensure availability, single wavelength groups will not be orderable Rev. 2.1, 18-Oct-2022 Document Number: 81370 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW41.. www.vishay.com Vishay Semiconductors CHROMATICITY COORDINATED GROUPS FOR WHITE SMD LED 5L 5K 6L 6K X Y X Y 0.291 0.268 0.330 0.330 0.285 0.279 0.330 0.347 0.307 0.312 0.347 0.371 0.310 0.297 0.345 0.352 0.296 0.259 0.330 0.310 0.291 0.268 0.330 0.330 0.310 0.297 0.338 0.342 0.313 0.284 0.352 0.344 0.310 0.297 0.345 0.352 0.307 0.312 0.347 0.371 0.330 0.347 0.367 0.401 0.330 0.330 0.364 0.380 0.313 0.284 0.352 0.344 0.310 0.297 0.338 0.342 0.330 0.330 0.364 0.380 0.330 0.310 0.360 0.357 7L 7K 8L 8K Note • Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of ± 0.01 TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 0° 20 10 0 0 20913 20 40 60 80 100 Fig. 1 - Forward Current vs. Ambient Temperature Rev. 2.1, 18-Oct-2022 20° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 120 Tamb - Ambient Temperature (°C) 10° ϕ - Angular Displacement IV rel - Relative Luminous Intensity IF - Forward Current (mA) 30 80° 0.6 0.4 0.2 0 95 10319 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Document Number: 81370 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW41.. www.vishay.com Vishay Semiconductors f - Chromaticity Coordinate Shift (x,y) 100 90 Irel - Relative Intensity 80 70 60 50 40 30 20 10 0 400 450 500 550 600 650 700 750 0.325 Y 0.275 0.250 0 IV rel - Relative Luminous Intensity IF - Forward Current (mA) 30 40 50 1.5 10 3.0 3.5 4.0 1.4 1.3 1.2 1.1 1 0.9 0.8 0.7 0.6 0.5 4.5 -40 VF - Forward Voltage (V) -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 20914 Fig. 4 - Forward Current vs. Forward Voltage Fig. 7 - Relative Luminous Intensity vs. Ambient Temperature 3.7 VF - Forward Voltage (V) 10 IV rel - Relative Luminous Intensity 20 IF - Forward Current (mA) Fig. 6 - Chromaticity Coordinate Shift vs. Forward Current 100 20217 10 20220 Fig. 3 - Relative Intensity vs. Wavelength 1 2.5 X 0.300 800 λ - Wavelength (nm) 16196 0.350 1 0.1 3.6 3.5 3.4 3.3 3.2 3.1 0.01 1 20219 3 10 IF - Forward Current (mA) 100 Fig. 5 - Relative Luminous Intensity vs. Forward Current Rev. 2.1, 18-Oct-2022 -40 20915 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 8 - Forward Voltage vs. Ambient Temperature Document Number: 81370 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW41.. www.vishay.com Vishay Semiconductors 0.40 8L 8K y-Coordinates 0.35 7L 7K 6L 6K 0.30 5L 5K 0.25 0.20 0.25 19784_3 0.27 0.29 0.31 0.33 0.35 0.37 x-Coordinates Fig. 9 - Coordinates of Colorgroups PACKAGE DIMENSIONS in millimeters 0.9 1.75 ± 0.1 3.5 ± 0.2 0.8 A C technical drawings according to DIN specifications 2.2 2.8 ± 0.15 Pin identification Dimensions in mm Ø 2.4 3 + 0.15 area covered with solderresist Mounting Pad Layout 4 2.6 (2.8) 1.2 1.6 (1.9) 4 Dimensions: reflow and vapor phase (wave soldering) A Protection Diode C Rev. 2.1, 18-Oct-2022 20242 Document Number: 81370 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW41.. www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM.3.../.4... - SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 10.4 8.4 120° 4.5 3.5 Adhesive tape 13.00 12.75 2.5 1.5 62.5 60.0 Identification Label: Vishay type group tape code production code quantity Blister tape Component cavity 94 8670 TAPING OF VLM.3.../.4... 14.4 max. 321 329 18857 Fig. 12 - Reel Dimensions - GS18 SOLDERING PROFILE 3.5 3.1 2.2 2.0 IR Reflow Soldering Profile for Lead (Pb)-free Soldering Preconditioning acc. to JEDEC level 2a 300 3.6 3.4 4.0 3.6 8.3 7.7 1.85 1.65 1.6 1.4 4.1 3.9 0.25 4.1 3.9 2.05 1.95 max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 Temperature (°C) 5.75 5.25 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 94 8668 0 Fig. 10 - Tape Dimensions in mm for PLCC-2 0 REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 50 100 150 Time (s) 200 250 300 max. 2 cycles allowed 19885-3 Fig. 13 - Vishay Lead (Pb)-free Reflow Soldering Profile (according to J-STD-020) TTW Soldering (according to CECC00802) 10.0 9.0 120° 300 Lead temperature 63.5 60.5 Identification Label: Vishay type group tape code production code quantity 200 235 °C to 260 °C First wave 100 °C to 130 °C 100 100 2 K/s 50 180 178 14.4 max. Fig. 11 - Reel Dimensions - GS08 ca. 5 K/s Forced cooling 10 0 0 94 8665 948626-1 1000 ca. 2 K/s ca. 200 K/s 150 Full line: typical Dotted lines: process limits Second wave 1st line 2nd line 2.5 1.5 13.00 12.75 2nd line Temperature (°C) 250 4.5 3.5 10000 5s 50 100 150 200 250 Time (s) Fig. 14 - Double Wave Soldering of Opto Devices (all packages) Rev. 2.1, 18-Oct-2022 Document Number: 81370 6 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW41.. www.vishay.com Vishay Semiconductors PACKING INFORMATION PIECES PER REEL REELS PER BOX MOQ (1) VLMW41xxxx-xxxx-08 1500 5 7500 VLMW41xxxx-xxxx-18 8000 1 8000 PART Note (1) MOQ = minumum order quantity BAR CODE PRODUCT LABEL (example) RECOMMENDED METHOD OF STORAGE N A B C D E Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. F G H I K L After more than 672 h under these conditions moisture content will be too high for reflow soldering. M A. 2D barcode In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: B. Part No: Vishay part number 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. C. QTY: quantity D. SelCode: selection bin code E. Country of origin F. PTC: production plant code An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. G. Termination finish H. Region code I. Serial#: serial number K. Batch number: year, week, country code, plant code L. SL: storage location M. Environmental halogen-free symbols: L E V E L CAUTION This bag contains MOISTURE –SENSITIVE DEVICES RoHS, lead (Pb)-free, 2a 1. Shelf life in sealed bag 12 months at