VS-STPS30L30CTPBF

Packaging Information www.vishay.com Vishay General Semiconductor Packaging Information PACKAGING ORDERING CODE ANTI-STATIC PREFERRED PACKAGE CODE PACKAGE CODE 51, A PACKAGING DESCRIPTION Bulk 52, 52T P SMB (DO-214AA) /SMBG (DO-215AA), 12 mm tape, 7" diameter plastic reel 2D P SM5-8A (DO-218AB), 24 mm tape, 13" diameter plastic reel, anode towards sprocket hole 2E, K SM5-8A (DO-218AB), 24 mm tape, 13" diameter plastic reel, cathode towards sprocket hole 2M, P Tube packaging for 5KP/6KA type lead formed components 53, B 26 mm horizontal taping and ammo box packaging 54, C P 52.4 mm horizontal tape, 13" diameter paper reel 5A, 5AT P SMA (DO-214AC), 12 mm tape, 13" diameter plastic reel 5B, 5BT P SMB (DO-214AA) / SMBG (DO-215AA), 12 mm tape, 13" diameter plastic reel 5CA P GF1 (DO-214BA), 12 mm tape, 13" diameter plastic reel 57, 57T P SMC (DO-214AB) / SMCG (DO-215AB), 16 mm tape, 7" diameter plastic reel 6A P SlimSMA (DO-221AC), 12 mm tape, 7" diameter plastic reel 6B P SlimSMA (DO-221AC), 12 mm tape, 13" diameter plastic reel 9A, 9AT P SMC (DO-214AB) / SMCG (DO-215AB), 16 mm tape, 13" diameter plastic reel 61, 61T P SMA (DO-214AC), 12 mm tape, 7" diameter plastic reel 67A P GF1 (DO-214BA), 12 mm tape, 7" diameter plastic reel 72, E P Bulk pack for bridge and special axial-leaded formed devices 73, D 52.4 mm horizontal tape and ammo box packaging 77 P DFS bridge, 16 mm tape, 13" diameter paper reel 80 P MB-S (TO-269AA) bridge, 12 mm tape, 13" diameter paper reel 81 P D2PAK (TO-263AB) 24 mm tape, 13" diameter reinforced hub plastic reel 8W P D2PAK (TO-263AB) (wire bond) 24 mm tape, 13" diameter reinforced hub plastic reel 83 P GL34 (DO-213AA) 8 mm tape, 13" diameter plastic reel 84A P SMP (DO-220AA) 12 mm tape, 7" diameter plastic reel 85A P SMP (DO-220AA) 12 mm tape, 13" diameter plastic reel 86A P SMPC (TO-277A), 12 mm tape, 7" diameter plastic reel 87A P SMPC (TO-277A), 12 mm tape, 13" diameter plastic reel 89A P MicroSMP (DO-219AD), 8 mm tape, 7" diameter plastic reel 45, P P Anti-static tube packaging for Bridge and Power Pack 4W, P P Anti-static tube packaging for wire bond TO-220, ITO-220, TO-262 and TO-263 96 P GL41 (DO-213AB), 12 mm tape, 7" diameter plastic reel 97 P GL41 (DO-213AB), 12 mm tape, 13" diameter plastic reel 98 P 100, V GL34 (DO-213AA), 8 mm tape, 7" diameter plastic reel MPG06 pseudo radial tape, cathode first out of ammo pack H P Tape in 7" diameter plastic reel I P Tape in 13" diameter plastic reel TR P SMA (DO-214AC), 12 mm tape, 7" diameter plastic reel (1) TR3 P SMA (DO-214AC), 12 mm tape, 13" diameter plastic reel (1) Notes • “P” and bold letter denotes preferred package code • A “T” suffix added to the packaging codes for SMA, SMB and SMC products indicates that the patented folded-frame construction is used. This does not apply to TR and TR3 codes or TRANSZORB® TVS in SMA and SMB (1) Formerly sold by Vishay Telefunken® (Telefunken® is a registered trademark of Electro Holding GmbH) Revision: 12-Nov-2019 Document Number: 88869 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging Information www.vishay.com Vishay General Semiconductor BULK PACKAGING PREFERRED PACKAGE CODE PACKAGING DF-M, DF-S, DFL-S 45 GSIB-5S, PB CASE TYPES BOX SIZE QUANTITY INCHES cm EA. Anti-static plastic tubes 17.4 length 44.1 length 50 45 Anti-static plastic tubes 24.2 length 61.5 length 20 GBU, BU 45 Anti-static plastic tubes 18.5 length 47 length 20 GBL 45 Anti-static plastic tubes 17.5 length 44.5 length 20 45, 4W Anti-static plastic tubes 21.0 length 53.7 length 50 TO-247AD 45 Anti-static plastic tubes 20.0 length 50.8 length 30 MBS (TO-269AA) 45 Anti-static plastic tubes 20.3 x 0.41 51.5 x 1.04 100 GBL 51 Anti-static PVC tray 12.5 x 6.1 x 1.0 31.7 x 15.5 x 2.5 400 GBPC12-35W 51 Paper box 12.5 x 12.5 x 1.7 31.7 x 31.7 x 4.3 100 GBPC6 51 Paper box 7.5 x 7.5 x 1.43 19.0 x 19.0 x 3.6 100 KBL 51 Anti-static PVC tray 12.2 x 6.1 x 1.5 30.9 x 15.5 x 3.8 300 GBPC12-35 51 Paper box 12.5 x 12.5 x 1.7 31.7 x 31.7 x 4.3 100 KBU4, 6, 8 51 Anti-static PVC tray 12.2 x 6.1 x 1.5 30.9 x 15.5 x 3.8 250 WOG, 2WOG 51 Plastic bags - - 100 GBU / BU 51 Paper tray 13.1 x 6.6 x 1.2 33.2 x 16.8 x 3.0 250 TO-220AB / AC, ITO-220AC / AB, TO-262AA Revision: 12-Nov-2019 Document Number: 88869 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging Information www.vishay.com Vishay General Semiconductor AXIAL-LEADED TAPE AND REEL PACKAGING Inspection hole (both sides) A C Ammo pack can be opened on either side, depending on desired device polarity B All axial-leaded devices are packed in accordance with EIA standard RS-296-E. The diagrams given below refer to these specifications. TABLE 1 - AMMO PACK PACKAGING AVAILABLE PRODUCT OUTLINES PACKAGING PREFERRED DIMENSION DIMENSION DIMENSION QUANTITY PACKAGE CODE A B C BOX 26 mm horizontal tape, ammo pack DO-41(DO-204AL), MPG06 DO-15 (DO-204AC) P300 53, B 53, B 53, B 9.7" (247 mm) 1.7" (44 mm) 3.7" (95 mm) 3.0K 1.5K 0.75K 52 mm horizontal tape, ammo pack DO-41(DO-204AL), MPG06 DO-15 (DO-204AC) DO-201AD, GP20 P600 73, D 73, D 73, D 73, D 10.0" (255 mm) 3.15" (80 mm) 4.53" (115 mm) 3.0K 2.0K 1.0K 0.3K MPG06 100, V 13.4" (340 mm) 1.8" (47 mm) 7.9" (200 mm) 2.0K Pseudo / radial tape, ammo pack |D1 - D2| = 1.4 (0.055) Max. 0.8 (0.031) Max. Typ. 0.0 D1 D2 K C S A 0.8 (0.031) Max. E P E D Dia. (Table 2) Anode Lead White Tape B 6.0 ± 0.4 T (0.236 ± 0.0157) W Dimensions A, M, K, P, S and T apply to both sides Dimensions in millimeters (inches) Description Symbol Component Pitch A 2, 3 Inside Tape Spacing B 2, 3 Lead to Lead Eccentricity |D1 - D2| Lead Extension K Lead Bending E 2 Cumulative Pitch P 3 Exposed Adhesive S Tape Width T All polarized components shall be oriented in the same direction Fig. 1 91.9 (3.62) Dia. 50.8 (2.00) Dia. 38.1 (1.50) Dia. 14.3 (0.56) Dia. Kraft Paper Cathode Lead Colored Tape The “C” dimension of Fig. 2 is between flanges of the component reel and shall be 1.5 mm (0.059") to 8.00 mm (0.315") greater than the overall taped component width “W” (Fig. 1). Where “W” dimension is 68.2 mm (2.68") max. Fig. 2 Revision: 12-Nov-2019 Document Number: 88869 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging Information www.vishay.com Vishay General Semiconductor AXIAL-LEADED TAPE AND REEL PACKAGING TABLE 2 - REEL AND AMMO PACK TAPING SPECIFICATIONS COMPONENT PITCH “A” Fig. 1 INSIDE TAPE SPACING “B” Fig. 1 PREFERRED PACKAGE CODE UNITS PER REEL EA. INCHES mm INCHES DO-15 (DO-204AC) 54, C 4000 0.200 5.0 2.06 DO-201AD 54, C 1400 0.395 10.0 2.06 52.4 DO-41 (DO-204AL) 54, C 5500 0.200 5.0 2.06 52.4 DFS Surface-Mount 77 1500 - - GF1 (DO-214BA) 67A, H / 5CA, I 1500 / 6500 - - GL34 (DO-213AA) 98, H / 83, I 2500 / 9000 - COMPONENT  CASE TYPE GL41 (DO-213AB) Fig. 8 REEL DIMENSION “D” Fig. 2 LEAD BENDING “E” Fig. 1 mm INCHES mm INCHES 52.4 13.0 330 0.047 1.2 13.0 330 0.047 1.2 13.0 330 0.047 1.2 13.0 330 Fig. 8 - 7.0 / 13.0 178 / 330 Fig. 8 - - 7.0 / 13.0 178 / 330 Fig. 8 - - - 7.0 / 13.0 178 / 330 Fig. 8 - - - 13.0 330 0.079 2.0 mm 96, H / 97, I 1500 / 5000 Fig. 5 and Fig. 6 2500 0.500 GP10E 54, C 5500 0.200 5.0 2.06 52.4 13.0 330 0.047 1.2 GP20/1.5KE 54, C 1400 0.395 10.0 2.06 52.4 13.0 330 0.047 1.2 MPG06 54, C 5500 0.200 5.0 2.06 52.4 13.0 330 0.047 1.2 P600 54, C 800 0.395 10.0 2.06 52.4 13.0 330 0.047 1.2 GP10E Radial 12.7 SMP (DO-220AA) 84A, H / 85A, I 3000 / 10 000 - - 7.0 / 13.0 178 / 330 Fig. 8 - SMF (DO-219AB) H/I 3000 / 10 000 - - 7.0 / 13.0 178 / 300 Fig. 8 - I 2000 / 14 000 - - 13.0 330 Fig. 8 - 89A / H 4500 - - 7.0 178 Fig. 8 - SMPC (TO-277A) 86A, H / 87A, I 1500 / 6500 - - 7.0 / 13.0 178 / 330 Fig. 8 - SMA (DO-214AC) 61, 61T, TR, H / 5A, 5AT, TR3, I 1800 / 7500 - - 7.0 / 13.0 178 / 330 Fig. 8 - SMB (DO-214AA) / SMBG (DO-215AA) 52, 52T, H / 5B, 5BT, I 750 / 3200 - - 7.0 / 13.0 178 / 330 Fig. 8 - SMC (DO-214AB) / SMCG (DO-215AB) 57, 57T, H / 9A, 9AT, I 850 / 3500 - - 7.0 / 13.0 178 / 330 Fig. 8 - 2D / I 750 - - 13.0 330 Fig. 8 - 81, 8W, I 800 - - 13.0 330 Fig. 8 - SMPD (TO-263AC) / SMPA (DO-221BC) MicroSMP (DO-219AD) / MicroSMF (DO-219AC) DO-218AB / AC D2PAK (TO-263AB) MBS (TO-269AA) SlimSMA (DO-221AC) SlimSMAW (DO-221AD) SlimDPAK (TO-252AE) FlatPAK 5 x 6 Fig. 8 80, I 3000 - - 13.0 330 Fig. 8 - 6A, H / 6B, I 3500 / 14 000 - - 7.0 / 13.0 178 / 330 Fig. 8 - H, I 3500 / 14 000 - - 7.0 / 13.0 178 / 330 Fig. 8 - I 4500 - - 13.0 330 Fig. 8 - H/I 1500 / 6000 - - 7.0 / 13.0 178 / 330 Fig. 8 - MicroSMP (DO-219AD) I 16 000 - - 13.0 330 Fig. 8 - SMPA (DO-221BC) H 3500 - - 7.0 178 Fig. 8 - Note • Package codes, 61/5A, 52/5B are matrix-frame constructions for TRANSZORB® TVS in SMA and SMB only TABLE 3 - COMPONENT AND INSIDE HORIZONTAL TAPE SPACING COMPONENT BODY DIAMETER COMPONENTS SPACING A (LEAD TO LEAD) INSIDE TAPE SPACING “B” 0 mm to 5 mm  (0.0" to 0.197") 5.0 mm ± 0.5 mm (0.197" ± 0.020") 26 mm + 1.5 mm / - 0.0 mm (1.024" + 0.059" / - 0.0") 0 mm to 5 mm  (0.0" to 0.197") 5.0 mm ± 0.5 mm (0.197" ± 0.020") 52.4 mm + 1.5 mm / - 0.4 mm (2.062" + 0.059" / - 0.016") 5.01 mm to 10 mm  (0.197" to 0.394") 10 mm ± 0.5 mm (0.394" ± 0.020") 52.4 mm + 1.5 mm / - 0.4 mm (2.062" + 0.059" / - 0.016") CUMULATIVE PITCH TOLERANCE Not to exceed 1.5 mm (0.059") over 6 consecutive components Revision: 12-Nov-2019 Document Number: 88869 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging Information www.vishay.com Vishay General Semiconductor DIMENSIONS in millimeters (inches) 1.0 MAX. (1) (0.04) 2.54 (0.1) 2.29 (0.090) Body DIA. 12.7 (0.50) (Nominal) 0.66 (0.026) 0.55 (0.022) Lead DIA. (Center to Center) 3.2 (0.125) 2.9 (0.115) ± 1.0 (1) (± 0.039) 1.0 (0.039) MAX. 16.0 (0.63) MIN. Tape 11.0 (0.433) 9.75 (0.384) MAX. 8.50 (0.335) 3.06 (0.118) MAX. 12.5 (0.492) MIN. 0.6 (0.025) 0.4 (0.016) 19.0 (0.748) 17.5 (0.689) 2.0 (0.079) MAX. 4.51 (0.178) 3.11 (0.122) 13.0 (0.51) 12.4 (0.49) Note: (1) Component Alignment 5.68 (0.224) 4.68 (0.184) 4.3 (0.169) 3.7 (0.146) DIA. User Direction Feed Available only for MPG06 Product in Ammo Pack in Accordance with EIA Standard RS-468-A Utilizing 0.61 mm (0.024") Diameter Leads. Maximum Cumulative Pitch Tolerance: 1.0 mm (0.039")/20 Pitch. Fig. 3 - Pseudo Radial RADIAL TAPE PACKAGING “C” Arbor Hole DIA. 30 ± 5 ID (1.181 ± 0.197) Core DIA. 34.9 to 102 (1.37 to 4.02) 55 (2.17) MAX. 330 (13.0) MAX. Fig. 4 - Reel Dimensions Notes • “C” dimension between the reel flanges shall be governed by the overall width of the taped components and shall be 1.5 mm (0.057") to 8.0 mm (0.315") greater than the overall width • All leaded devices are packaged in accordance with EIA standard RS-468-A specification and are available on reel or in fan fold box (ammo pack) • All dimensions are in millimeters and (inches) Revision: 12-Nov-2019 Document Number: 88869 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging Information www.vishay.com Vishay General Semiconductor SURFACE MOUNT TAPE AND REEL PACKAGING Tape with Components shall Pass Around Bending Radius without Damage, for Reels with Hub Diameters Approaching Minimum Dimension Top Cover Tape Thickness: 0.10 mm (0.004") Max. Bending Radius R Ref. Fig. 6 Embossed Carrier Tape G Component Cavity N A B D T C Fig. 5 Fig. 7 DIMENSIONS in millimeters (inches) A MAX. B MIN. C D MIN. N MIN. G MAX. T MAX. 8 mm (0.315) 330 ± 2.0 (13.0 ± 0.079) 178 ± 2.0 (7.0 ± 0.079) 1.5 (0.059) 13.0 ± 0.20 (0.51 ± 0.008) 20.2 (0.795) 50 (1.97) 9.9 (0.389) 14.4 (0.567) 12 mm (0.472) 330 ± 2.0 (13.0 ± 0.079) 178 ± 2.0 (7.0 ± 0.079) 1.5 (0.059) 13.0 ± 0.20 (0.51 ± 0.008) 20.2 (0.795) 50 (1.97) 14.4 (0.567) 18.4 (0.724) 16 mm (0.630) 330 ± 2.0 (13.0 ± 0.079) 178 ± 2.0 (7.0 ± 0.079) 1.5 (0.059) 13.0 ± 0.20 (0.51 ± 0.008) 20.2 (0.795) 50 (1.97) 18.4 (0.724) 22.4 (0.802) 24 mm (0.945) 330 ± 2.0 (13.0 ± 0.079) 178 ± 2.0 (7.0 ± 0.079) 1.5 (0.059) 13.0 ± 0.20 (0.51 ± 0.008) 20.2 (0.795) 50 (1.97) 26.4 (1.039) 30.4 (1.197) TAPE SIZE Revision: 12-Nov-2019 Document Number: 88869 6 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging Information www.vishay.com Vishay General Semiconductor SURFACE MOUNT TAPE AND REEL PACKAGING P0 De-Reeling Direction 10 Pitches Cumulative Tolerance on Tape ± 0.2 P2 T2 T D0 E1 Top Cover Tape A0 (2) F W K0 B1 (1) E2 B0 S1 T1 P1 Notes (1) For machine reference only, including draft and radii concentric around B0 (2) D1 for components 2.0 mm x 1.2 mm and larger See note 1 and table TVS Polarization DFS, DFLS, MBS, Polarization Rectifiers Polarization GL41, GL34, GF1, SMA, SMB, SMC, SMP, MicroSMP, SMPC, SlimSMA, SMPA, SlimSMAW, DO-218AB/2E and K, MicroSMF, SMF DO-218AB/2D and I DO-218 AC / I TO-263AB, TO-252, SMPD, and SlimDPAK FlatPAK 5 x 6 Pin 1 mark Fig. 8 8 mm, 12 mm, 16 mm, AND 24 mm EMBOSSED TAPE in millimeters (inches) TAPE SIZE 8 mm, 12 mm 16 mm, 24 mm D0 1.5 ± 0.1 (0.059 ± 0.004) E1 P0 P2 2.0 ± 0.05 (0.079 ± 0.002) 1.75 ± 0.1 4.0 ± 0.1 (0.069 ± 0.004) (0.157 ± 0.004) 2.0 ± 0.1 (0.079 ± 0.004) A0, B0, K0 S1 MIN. T MAX. T1 MAX. (1) 0.6 (0.024) 0.600 (0.024) 0.1 (0.004) Revision: 12-Nov-2019 Document Number: 88869 7 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging Information www.vishay.com Vishay General Semiconductor DIMENSIONS in millimeters (inches) CASE TYPE TAPE SIZE B1 MAX. D1 MIN. E2 MIN. GL34 (DO-213AA) 4.2 (0.165) MicroSMP (DO-219AB) / MicroSMF (DO-219AD) 3.28 (0.129) 8 (0.315) SMF (DO-219AB) F P1 R REF. 6.25 (0.246) 1.0 (0.039) - 6.05 (0.238) T2 MAX. 2.4 (0.094) 3.5 ± 0.05 (0.138 ± 0.002) 20 (0.787) 1.919 (0.076) 1.8 (0.07) 4.0 ± 0.10 (0.157 ± 0.004) GL34 (DO-213AA) 4.5 (0.177) GF1 (DO-214BA) 3.25 (0.128) 8.2 (0.323) SMA (DO-214AC) SMP (DO-220AA) 7.0 (0.276) SMB (DO-214AA) / SMBG (DO-215AA) 8.2 (0.323) 5.5 ± 0.05 (0.217 ± 0.002) 16 (0.630) 24 (0.945) SlimSMA (DO-221AC) / SMPA (DO-221BC) FlatPAK 5 x 6 12.3 (0.484) 2.77 (0.109) 2.64 (0.104) SMPD (TO-263AC) SlimSMAW (DO-221AD) 1.84 (0.072) 8.0 ± 0.10 (0.315 ± 0.004) 12.1 (0.476) 1.5 (0.059) 14.25 (0.561) 12 (0.472) 20.1 (0.791) 6.2 (0.244) 6.4 (0.252) 7.5 ± 0.1 (0.295 ± 0.004) 12.0 ± 0.10 (0.472 ± 0.004) DFS D2PAK (TO-263AB) DO-218AB / AC 8.2 (0.322) 1.43 (0.056) SMC (DO-214AB) /  SMCG (DO-215AB) SlimDPAK (TO-252AE) 8.3 (0.327) 2.64 (0.104) 10.25 (0.404) 12 (0.472) SMPC (TO-277A) W MAX. 25 (0.984) 2.0 (0.079) 16.3 (0.642) 3.91 (0.154) 22.25 (0.876) 16.0 ± 0.10 11.5 ± 0.1 (0.630 ± 0.004) (0.453 ± 0.004) 12.0 ± 0.10 (0.472 ± 0.004) 5.31 (0.209) 4.0 ± 0.10 (0.157 ± 0.004) 5.5 ± 0.05 (0.217 ± 0.002) 8.0 ± 0.10 (0.315 ± 0.004) 1.53 (0.060) 10.25 (0.404) 2.35 (0.093) 1.61 (0.063) 24.3 (0.957) 12.3 (0.484) 1.20 ± 0.10 (0.047 ± 0.004) Notes (1) A , B , and K are determined by the maximum dimensions of the component size. The clearance between the component and the cavity 0 0 0 must be within 0.05 mm (0.002") min. to 0.5 mm (0.02") max. for 8 mm tape and 12 mm tape, 0.15 mm (0.066") min. to 0.90 mm (0.035") max. for 16 mm tape and 0.15 mm (0.006") min. to 1.0 mm (0.59") max. for 24 mm tape (2) All surface mount components are packed in accordance with EIA standard 481-E Revision: 12-Nov-2019 Document Number: 88869 8 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000