TLP597A_07

TLP597A TOSHIBA PHOTOCOUPLER PHOTO RELAY TLP597A TELECOMMUNICATION DATA ACQUISITION MEASUREMENT INSTRUMENTATION The TOSHIBA TLP597A consists of an aluminum gallium arsenide infrared emitting diode optically coupled to a photo-MOS FET in a six lead plastic DIP package (DIP6). The TLP597A is a bi-directional switch can replace mechanical relays in many applications. Unit: mm Features • • • • • • • • 6 pin DIP (DIP6) 1-Form-A Peak Off-State Voltage Trigger LED Current On-State Current On-State Resistance Isolation Voltage UL Recognized : 60 V (MIN.) : 3 mA (MAX.) : 500 mA (MAX.) : 2 Ω (MAX.) : 2500 Vrms (MIN.) : UL1577, File No. E67349 JEDEC EIAJ TOSHIBA Weight: 0.4 g Pin Configuration (top view) 1 2 3 6 5 4 1 : ANODE 2 : CATHODE 3 : N.C. 4 : DRAIN D1 5 : SOURCE 6 : DRAIN D2 11−7A8 Schematic 1 2 6 5 4 1 2007-10-01 TLP597A Absolute Maximum Ratings (Ta = 25°C) CHARACTERISTIC Forward Current Forward Current Derating (Ta > 25°C) = LED Peak Forward Current (100 μs pulse, 100 pps) Reverse Voltage Junction Temperature Off-State Output Terminal Voltage A Connection DETECTOR On-State RMS Current B Connection C Connection On-State Current Derating (Ta > 25°C) = Junction Temperature Operating Temperature Range Storage Temperature Range Lead Soldering Temperature (10 s) Isolation Voltage (AC, 1 minute, R.H. < 60%) (NOTE1) = A Connection B Connection C Connection Tj Topr Tstg Tsol BVS ΔION/°C ION SYMBOL IF ΔIF/°C IFP VR Tj VOFF RATING 50 −0.5 1 5 125 60 500 500 1000 −5.0 −5.0 −10.0 125 −40~85 −55~125 260 2500 °C °C °C °C Vrms mA/°C mA UNIT mA mA/°C A V °C V Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (NOTE1):Device considered a two-terminal device : Pins 1, 2 and 3 shorted together, and pins 4, 5 and 6 shorted together. Recommended Operating Conditions CHARACTERISTIC Supply Voltage Forward Current On-State Current Operating Temperature SYMBOL VDD IF ION Topr MIN. ⎯ 5 ⎯ −20 TYP. ⎯ 7.5 ⎯ ⎯ MAX. 48 25 400 65 UNIT V mA mA °C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Circuit Connections 1 2 3 6 5 4 LOAD AC or DC 1 2 3 6 5 4 LOAD 1 2 3 6 5 4 LOAD DC DC A Connection B Connection C Connection 2 2007-10-01 TLP597A Individual Electrical Characteristics (Ta = 25°C) CHARACTERISTIC Forward Voltage LED Reverse Current Capacitance DETECTOR Off-State Current Capacitance SYMBOL VF IR CT IOFF COFF TEST CONDITION IF = 10 mA VR = 5 V V = 0, f = 1 MHz VOFF = 60 V V = 0, f = 1 MHz MIN. 1.0 ⎯ ⎯ ⎯ ⎯ TYP. 1.15 ⎯ 30 ⎯ 130 MAX. 1.3 10 ⎯ 1 ⎯ UNIT V μA pF μA pF Coupled Electrical Characteristics (Ta = 25°C) CHARACTERISTIC Trigger LED Current Close LED Current A Connection On-State Resistance B Connection C Connection RON SYMBOL IFT IFC TEST CONDITION ION = 500 mA IOFF = 100 μA ION = 500 mA, IF = 5 mA ION = 500 mA, IF = 5 mA ION = 1000 mA, IF = 5 mA MIN. ⎯ 0.1 ⎯ ⎯ ⎯ TYP. ⎯ ⎯ 1 0.5 0.25 MAX. 3 ⎯ 2 1 ⎯ Ω UNIT mA mA Isolation Characteristics (Ta = 25°C) CHARACTERISTIC Capacitance Input to Output Isolation Resistance SYMBOL CS RS TEST CONDITION VS = 0 V, f = 1 MHz VS = 500 V, R.H. < 60% = AC, 1 minute Isolation Voltage BVS AC, 1 second (in oil) DC, 1 minute (in oil) MIN. ⎯ 5 × 10 10 TYP. 0.8 10 14 MAX. ⎯ ⎯ ⎯ ⎯ ⎯ UNIT pF Ω Vrms Vdc 2500 ⎯ ⎯ ⎯ 5000 5000 Switching Characteristics (Ta = 25°C) CHARACTERISTIC Turn-on Time Turn-off Time Turn-on Time Turn-off Time SYMBOL tON tOFF tON tOFF TEST CONDITION RL = 200 Ω VDD = 20 V, IF = 5 mA RL = 200 Ω VDD = 20 V, IF = 10 mA (NOTE 2) MIN. ⎯ ⎯ (NOTE 2) ⎯ ⎯ TYP. 0.6 0.1 0.3 0.1 MAX. 2 1 1 1 UNIT ms ms (NOTE 2) : SWITCHING TIME TEST CIRCUIT IF 1 2 4 10% tON tOFF 6 RL VDD IF VOUT VOUT 90% 3 2007-10-01 TLP597A IF - Ta 100 ALLOWABLE FORWARD CURRENT IF (mA) 80 60 40 20 0 -20 0 20 40 60 80 100 120 AMBIENT TEMPERATURE　Ta(℃) 1200 ON-STATE CURRENT ION (mA) 1000 800 600 400 200 0 -20 0 20 40 60 80 100 120 AMBIENT TEMPERATURE Ta(℃) A,B CONNECTION C CONNECTION ION - Ta IF 100 FORWARD CURRENT IF (mA) 50 30 10 5 3 1 0.5 0.3 0.1 0.6 - VF 750 ON-STATE CURRENT ION(mA) 500 250 0 -250 -500 -750 -1 Ta=25℃,IF =5mA A CONNECTION ION - V ON 0.8 1 1.2 1.4 1.6 FORWARD VOLTAGE　V（V) F 1.8 -0.5 0 0.5 ON-STATE VOLTAGE　VON(V) 1 RON - Ta ON-STATE RESISTANCE R ON(Ω) 2 ION =500mA IF =5mA IFT 5 TRIGGER LED CURRENT IFT(mA) 4 3 2 1 0 -40 ION=500mA t