TLP627,TLP627-2,TLP627-4
TOSHIBA Photocoupler IRED & Photo-Transistor
TLP627, TLP627-2, TLP627-4
Programmable Controllers
DC-output Module
Telecommunication
Unit: mm
TLP627
The TOSHIBA TLP627,-2 and -4 consist of an infrared emitting diode
optically coupled to a Darlington connected phototransistor which has an
integral base-emitter resistor to optimize switching speed and elevated
temperature characteristics.
The TLP627-2 offers two isolated channels in eight lead plastic DIP, while
the TLP627-4 provide four isolated channels per package.
Collector-Emitter Voltage
Current Transfer Ratio
UL-recognized
: 300 V (min)
: 1000 % (min)
: UL 1577, File No.E67349
cUL-recognized
: CSA Component Acceptance Service
No.5A File No.E67349
VDE-approved
: EN 60747-5-5 (Note 1)
TOSHIBA
11-5B2
Weight: 0.26 g (typ.)
TLP627-2
Note 1: When a VDE approved type is needed,
please designate the Option(D4).
TOSHIBA
11-10C4
Weight: 0.54 g (typ.)
TLP627-4
TOSHIBA
11-20A3
Weight: 1.1 g (typ.)
Start of commercial production
1984-08
© 2019
Toshiba Electronic Devices & Storage Corporation
1
2019-05-20
TLP627,TLP627-2,TLP627-4
Pin Configuration (top view)
TLP627-2
TLP627
TLP627-4
1
4
1
8
2
3
2
7
2
15
3
6
3
14
4
5
4
13
5
12
6
11
7
10
8
9
1: ANODE
2: CATHODE
3: EMITTER
4:COLLECTOR
1,3: ANODE
2,4: CATHODE
5,7: EMITTER
6,8:COLLECTOR
1
16
1,3,5,7
: ANODE
2,4,6,8
: CATHODE
9,11,13,15 : EMITTER
10,12,14,16 :COLLECTOR
Start of commercial production
1984-08
© 2019
Toshiba Electronic Devices & Storage Corporation
2
2019-05-20
TLP627,TLP627-2,TLP627-4
Absolute Maximum Ratings (Ta=25°C)
Rating
Characteristics
Symbol
TLP627-2
TLP627-4
Unit
TLP627
IF
60
50
mA
∆IF /°C
-0.7(Ta≥39°C)
-0.5(Ta≥25°C)
mA /°C
Forward Current
Detector
LED
Forward Current Derating
Pulse Forward Current
IFP
1 (100μs pulse,100pps)
A
Reverse Voltage
VR
5
V
Diode Power Dissipation
(1 Circuit)
PD
100
70
mW
Diode Power Dissipation Derating
(1 Circuit)
∆ PD /°C
-1.2 (Ta≥39°C)
-0.7 (Ta≥25°C)
mW /°C
Collector-Emitter Voltage
VCEO
300
V
Emitter -Collector Voltage
VECO
0.3
V
IC
150
mA
Collector Current
Collector Power Dissipation
Collector Power Dissipation Derating
(1 Circuit)
(Ta≥25°C,1 Circuit)
PC
150(300(Note 1))
100
mW
∆ PC /°C
-1.5(-3.5(Note 1))
-1.0
mW /°C
Operating Temperature Range
Topr
-55 to 100
°C
Storage Temperature Range
Tstg
-55 to 125
°C
Lead Soldering Temperature
Tsol
260(10 s)
°C
Total Package Power Dissipation
(1 Circuit)
Total Package Power Dissipation Derating (Ta≥25°C,1 Circuit)
Isolation Voltage
(AC,60 s, R.H. ≤ 60 %)
PT
250(320(Note 1))
150
mW
∆ PT/°C
-2.5(-3.2(Note 1))
-1.5
mW /°C
(Note 2)
BVS
5000
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: IF=20 mA Max
Note 2: Device considered a two terminal device : LED side pins Shorted together and DETECTOR side pins shorted
together.
Recommended Operating Conditions
Characteristics
Symbol
Min
Supply Voltage
VCC
Forward Current
IF
Collector Current
Operating Temperature
Typ.
Max
Unit
—
—
200
V
—
16
25
mA
IC
—
—
120
mA
Topr
-25
—
85
°C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
© 2019
Toshiba Electronic Devices & Storage Corporation
3
2019-05-20
TLP627,TLP627-2,TLP627-4
Electrical Characteristics (Ta=25°C)
Detector
LED
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Forward Voltage
VF
IF = 10 mA
1.0
1.15
1.3
V
Reverse Current
IR
VR = 5 V
—
—
10
μA
Capacitance
CT
V = 0 V, f = 1MHz
—
30
—
pF
Collector-Emitter
Breakdown Voltage
V(BR)CEO IC = 0.1mA
300
—
—
V
Emitter-Collector
Breakdown Voltage
V(BR)ECO IE = 0.1mA
0.3
—
—
V
VCE = 200V
—
10
200
nA
VCE = 200V, Ta = 85 °C
—
—
20
μA
V = 0 V, f = 1MHz
—
10
—
pF
Min
Typ.
Max
Unit
Collector Dark Current
Capacitance Collector
to Emitter
ICEO
CCE
Coupled Electrical Characteristics (Ta=25°C)
Characteristics
Current Transfer Ratio
Symbol
Test Condition
IC/IF
IF = 1 mA, VCE = 1 V
1000
4000
—
%
Saturated CTR
IC/IF(sat)
IF = 10 mA, VCE = 1 V
500
—
—
%
Collector-Emitter
Saturation Voltage
IC = 10 mA, IF = 1 mA
—
—
1.0
VCE(sat)
IC = 100 mA, IF = 10 mA
0.3
—
1.2
Min
Typ.
Max
Unit
—
0.8
—
pF
5×1010
1014
—
Ω
5000
—
—
Vrms
V
Isolation Electrical Characteristics (Ta=25°C)
Characteristics
Symbol
Test Condition
Capacitance Input to Output
CS
VS = 0 V, f = 1 MHz
Isolation Resistance
RS
VS = 500 V, R.H .≤ 60 %
Isolation Voltage
BVS
© 2019
Toshiba Electronic Devices & Storage Corporation
AC, 60 s
4
2019-05-20
TLP627,TLP627-2,TLP627-4
Switching Characteristics (Ta=25°C)
Characteristics
Symbol
Rise Time
Fall Time
tr
tf
Turn-on Time
ton
Turn-off Time
toff
Turn-on Time
tON
Strage Time
ts
Turn-off Time
tOFF
Fig.1
Test Condition
VCC = 10 V
IC = 10 mA
RL = 100 Ω
RL = 180 Ω (Fig.1)
VCC = 10 V, IF = 16 mA
Min
Typ.
Max
—
40
—
—
15
—
—
50
—
—
15
—
—
5
—
—
40
—
—
80
—
Unit
μs
Switching Time Test Circuit
© 2019
Toshiba Electronic Devices & Storage Corporation
5
2019-05-20
TLP627,TLP627-2,TLP627-4
NOTE: The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
© 2019
Toshiba Electronic Devices & Storage Corporation
6
2019-05-20
TLP627,TLP627-2,TLP627-4
NOTE: The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
© 2019
Toshiba Electronic Devices & Storage Corporation
7
2019-05-20
TLP627,TLP627-2,TLP627-4
ICEO
ICEO
10-3
NORMALIZED IC
NORMALIZED IC
NOTE: The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
© 2019
Toshiba Electronic Devices & Storage Corporation
8
2019-05-20
TLP627,TLP627-2,TLP627-4
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as “TOSHIBA”.
Hardware, software and systems described in this document are collectively referred to as “Product”.
• TOSHIBA reserves the right to make changes to the information in this document and related Product without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR
APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, lifesaving and/or life supporting medical
equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to
control combustions or explosions, safety devices, elevators and escalators, and devices related to power plant. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative or contact us via our website.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or
vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of
Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled
substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
https://toshiba.semicon-storage.com/
© 2019
Toshiba Electronic Devices & Storage Corporation
9
2019-05-20