HP122WF1002T4E

DATA SHEET Product Name High-Power Thick Film Chip Resistors Part Name HP Series File No. SMD-SP-003 Uniroyal Electronics Global Co., Ltd. 88#, Longteng Road, Economic & Technical Development Zone, Kunshan, Jiangsu, China Tel Email Manufacture Plant +86 512 5763 1411 / 22 /33 marketing@uni-royal.cn Uniroyal Electronics Industry Co., Ltd. Aeon Technology Corporation Royal Electronic Factory (Thailand) Co., Ltd. Royal Technology (Thailand) Co., Ltd. High-Power Thick Film Chip Resistors 1. Scope 1.1 This datasheet is the characteristics of High Power Thick Film Chip Resistors manufactured by UNI-ROYAL. 1.2 High power standard size 1.3 Suitable for both wave & re-flow soldering 1.4 AEC-Q200 qualified 1.5Application：AV adapters，LCD back-light，camera strobe ect. 2. Part No. System Part No. includes 14 codes shown as below: 2.1 1st~4th codes: Part name. E.g.: HP02、HP03、HP05、HP06、HP07、HP10、HP11、HP12 2.2 5th~6th codes: Power rating. E.g.: W=Normal Size “1~G” = “1~16” Wattage 1/32 3/4 1/2 1/3 1/4 1/8 1/10 1/16 1/20 1 Normal Size WH 07 W2 W3 W4 W8 WA WG WM 1W If power rating is equal or lower than 1 watt, 5th code would be “W” and 6th code would be a number or letter. E.g.: WA=1/10W W4=1/4W 2.3 7th code: Tolerance. E.g.: F=±1% J=±5% 2.4 8th~11th codes: Resistance Value. 2.4.1 If value belongs to standard value of E-24 series, the 8th code is zero, 9th~10th codes are the significant figures of resistance value, and the 11th code is the power of ten. 2.4.2 If value belongs to standard value of E-96 series, the 8th~10th codes are the significant figures of resistance value, and the 11th code is the power of ten. 2.4.3 11th codes listed as following: 0=100 1=101 2=102 3=103 4=104 5=105 6=106 J=10-1 K=10-2 L=10-3 M=10-4 th th 2.5 12 ~14 codes. 2.5.1 12th code: Packaging Type. E.g.: B = Bulk / Box T=Tape/Reel 2.5.2 13th code: Standard Packing Quantity. 4=4,000pcs 5=5,000pcs C=10,000pcs D=20,000pcs E=15,000pcs Chip Product: BD=B/B-20000pcs TC=T/R-10000pcs 2.5.3 14th code: Special features. E = Environmental Protection, Lead Free, or Standard type. 3. Ordering Procedure (Example: HP12 2W ±5% 10KΩ T/R-4000) H P 1 2 Product Type: Fill-in 4 digits with the chip resistor type as follows: HP02 HP03 HP05 HP06 HP07 HP10 HP11 HP12 2 W Wattage: WA=1/10W W5=1/5W W3=1/3W W2=1/2W 07=3/4W 1W=1W 1Q=1.25W 2W=2W J 0 1 0 3 T Resistance Value: 5% (E-24 series): 1st code is zero, 2nd~3rd codes are the significant figures of resistance value, and the rest code is the power of ten. 1% (E-96 series): 1st~3rd codes are the significant figures of resistance value and the rest code is the power of ten. J=10-1; K=10-2; L=10-3 4 E Packing quantity: HP02: C=10000PCS HP03,HP05,HP06, HP07: 5=5000PCS HP10,HP11,HP12: 4=4000PCS Special Feature E= Lead-Free Tolerance: F=±1% J=±5% Sep.19,2022 V.2 www. uni-royal.cn Packing Type: T=Tape/Reel Page 2/9 High-Power Thick Film Chip Resistors 4. Marking 4.1 For HP02 size. Due to the very small size of the resistor’sbody, there is no marking on the body. 4.2 Normally, the making of 0Ω HP03, 0Ω HP05, 0Ω HP06,0Ω HP07， 0Ω HP10,0Ω HP11， 0Ω HP12 resistors as following 0 → 0Ω 4.3 ±5% tolerance products (E-24 series): 3 codes. 1st~2nd codes are the significant figures of resistance value, 333 → 33KΩ and the rest code is the power of ten. 4.4 ±1% tolerance products (E-96 series): 4 codes. 1st~3rd codes are the significant figures of resistance value, and the rest code is the power of ten. Letter "R" in mark means decimal point. 4.5 More than HP05 specifications (including) 4 digits, Product below 1Ω, show as following, the first digit Is “R” which as decimal point. 2701 → 2.7KΩ R300 → 0.3Ω 4.6 Standard E-96 series values of 0603 ≤1% : due to the small size of the resistor’s body, 3 digits marking will be used to indicate the accurate resistance value by using the following multiplier & resistance code. Multiplier Code (for 0603 ≤±1% marking) Code Multiplier A 10 B 0 10 C 1 10 2 D 10 E 3 10 F 4 10 G 5 10 H 6 10 7 X -1 10 Y Z -2 10-3 10 Standard E-96 series Resistance Value code (for 0603≤±1% marking) Value 100 Code 01 Value 178 Code 25 Value 316 Code 49 Value 562 Code 73 102 105 02 03 182 187 26 27 324 332 50 51 576 590 74 75 107 110 04 05 191 196 28 29 340 348 52 53 604 619 76 77 113 115 06 07 200 205 30 31 357 365 54 55 634 649 78 79 118 121 08 09 210 215 32 33 374 383 56 57 665 681 80 81 124 127 10 11 221 226 34 35 392 402 58 59 698 715 82 83 130 133 12 13 232 237 36 37 412 422 60 61 732 750 84 85 137 140 14 15 243 249 38 39 432 442 62 63 768 787 86 87 143 147 16 17 255 261 40 41 453 464 64 65 806 825 88 89 150 154 18 19 267 274 42 43 475 487 66 67 845 866 90 91 158 162 20 21 280 287 44 45 499 511 68 69 887 909 92 93 165 169 22 23 294 301 46 47 523 536 70 71 931 953 94 95 174 24 309 48 549 72 976 96 Sep.19,2022 V.2 www. uni-royal.cn Page 3/9 High-Power Thick Film Chip Resistors So the resistance value are marked as the following examples 1.96KΩ=196×101Ω=29B 12.4Ω=124×10-1Ω=10X 4.7 Standard E-24 and not belong to E-96 series values (≤±1%) of 0603 size: the marking is the same as 5% tolerance but marking as underline. 333=33KΩ 680=68Ω 5. Dimension Type Dimension(mm) L W H A B HP02(0402) 1.00±0.10 0.50±0.05 0.35±0.05 0.20±0.10 0.25±0.10 HP03(0603) 1.60±0.10 0.80±0.10 0.45±0.10 0.30±0.20 0.30±0.20 HP05(0805) 2.00±0.15 1.25+0.15/ -0.10 0.55±0.10 0.40±0.20 0.40±0.20 HP06(1206) 3.10±0.15 1.55+0.15/-0.10 0.55±0.10 0.45±0.20 0.45±0.20 HP07(1210) 3.10±0.10 2.60±0.20 0.55±0.10 0.50±0.25 0.50±0.20 HP10(2010) 5.00±0.10 2.50±0.20 0.55±0.10 0.60±0.25 0.50±0.20 HP11(1812) 4.50±0.20 3.20±0.20 0.55±0.20 0.50±0.20 0.50±0.20 HP12(2512) 6.35±0.10 3.20±0.20 0.55±0.10 0.60±0.25 0.50±0.20 6. Resistance Range Type Size Power Rating HP02 0402 1/10W HP03 0603 1/5W HP05 0805 1/3W HP06 1206 1/2W HP07 1210 3/4W HP10 2010 1W HP11 1812 1.25W HP12 2512 2W Sep.19,2022 V.2 Resistance Range of 1% & 5% 1Ω~10M 0Ω:≤10mΩ 0.1Ω~10M 0Ω:≤8mΩ 0.01Ω~10M 0Ω:≤5mΩ 0.01Ω~10M 0Ω:≤5mΩ 0.1Ω~10M 0Ω:≤4mΩ 0.01Ω~10M 0Ω:≤5mΩ 0.1Ω~10M 0Ω:≤5mΩ 0.01Ω~10M 0Ω:≤5mΩ Max. Working Voltage/Current 50V 3A 75V 5A 150V 6A 200V 10A 200V 12A 200V 12A 200V 12A 300V 16A www. uni-royal.cn Max. Overload Voltage/ Current 100V 6A 150V 10A 300V 12A 400V 20A 500V 24A 500V 24A 500V 24A 500V 32A Dielectric withstanding Voltage Operating Temperature 100V -55℃~155℃ 300V -55℃~155℃ 500V -55℃~155℃ 500V -55℃~155℃ 500V -55℃~155℃ 500V -55℃~155℃ 500V -55℃~155℃ 500V -55℃~155℃ Page 4/9 High-Power Thick Film Chip Resistors 7. Soldering pad size recommended HP02 A 0.5±0.05 Dimension(mm) B C 0.5±0.05 0.6±0.05 HP03 HP05 HP06 HP07 HP10 HP11 HP12 0.8±0.05 1.0±0.1 2.0±0.1 2.0±0.1 3.6±0.1 3.0±0.1 4.9±0.1 0.8±0.05 1±0.1 1.1±0.1 1.1±0.1 1.4±0.1 1.4±0.1 1.35±0.1 Type 0.9±0.05 1.4±0.1 1.8±0.1 2.9±0.1 3±0.1 3.7±0.1 3.7±0.1 D 1.5±0.05 2.4±0.05 3±0.1 4.2±0.1 4.2±0.1 6.4±0.1 5.8±0.1 7.6±0.1 8. Derating Curve Power rating will change based on continuous load at ambient temperature from -55 to 155℃. It is constant between -55 to 70℃, and derate to zero when temperature rise from 70 to 155℃. Voltage rating: Resistors shall have a rated direct-current (DC) continuous working voltage or an approximate sine-wave root-mean-square (RMS) alternating-current (AC) continuous working voltage at commercial-line frequency and waveform corresponding to the power rating, as determined from the following formula: RCWV = √𝑃 × R Remark: RCWV: Rating Continuous Working Voltage (Volt.) P: power rating (Watt) R: nominal resistance (Ω) In no case shall the rated DC or RMS AC continuous working voltage be greater than the applicable maximum value. The overload voltage is 2.5 times RCWV or Max. Overload voltage whichever is lower. 9. Structure 10. Performance Specification Characteristic Limits Ref. Standards ±5%: ±(3.0%+0.1Ω) ±1%: ±(1.0%+0.1Ω) Operational life Electrical Characterization Sep.19,2022 V.2 Test Methods 125℃, at 36% of operating power, 1000H(1.5 hours “ON”, 0.5 hour “OFF”). HP02: