FCSP130ETR

FCSP130ETR Vishay High Power Products FlipKY®, 1 A FEATURES • Ultralow VF per footprint area • Low thermal resistance • One-fifth footprint of SMA • Super low profile (< 0.7 mm) • Available tested on tape and reel • Small footprint, surface mountable FlipKY ® • Low forward voltage drop • High frequency operation • Guard ring for enhanced ruggedness and long term reliability • Designed for consumer level DESCRIPTION True chip-scale packaging is available from Vishay HPP. The FCSP130ETR surface mount Schottky rectifier has been designed for applications requiring low forward drop and very small footprints on PC boards. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection. The FlipKY® package, is one-fifth the footprint of a comparable SMA package and has a profile of less then 0.7 mm. Combined with the low thermal resistance of the die level device, this makes the FlipKY the best device for applications where printed circuit board space is at a premium and in extremely thin application environments such as battery packs, cell phones and PCMCIA cards. PRODUCT SUMMARY IF(AV) VR 1A 30 V MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 µs sine 1.0 Apk, TJ = 125 °C Range CHARACTERISTICS Rectangular waveform VALUES 1.0 30 220 0.33 - 55 to 150 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM FCSP130ETR 30 UNITS V Document Number: 93431 Revision: 26-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 FCSP130ETR Vishay High Power Products FlipKY®, 1 A ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current Maximum peak one cycle non-repetitive surge current at 25 °C Non-repetitive avalanche energy Repetitive avalanche current SYMBOL IF(AV) IFSM 10 ms sine or 6 ms rect. pulse EAS IAR TEST CONDITIONS 50 % duty cycle at TPCB = 120 °C, rectangular waveform 5 µs sine or 3 µs rect. pulse Following any rated load condition and with rated VRRM applied VALUES 1.0 220 21 10 2.0 mJ A A UNITS TJ = 25 °C, IAS = 2.0 A, L = 5.0 mH Current decaying linearly to zero in 1 µs Frequency limited by TJ maximum VA = 1.5 x VR typical ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 1A Maximum forward voltage drop VFM (1) 2A 1A 2A Maximum reverse leakage current Maximum junction capacitance Maximum voltage rate of charge Note (1) Pulse width < 300 µs, duty cycle < 2 % IRM (1) CT dV/dt VR = Rated VR TEST CONDITIONS TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C TYP. 0.41 0.46 0.29 0.37 30 10 MAX. 0.45 0.50 0.33 0.40 100 30 210 10 000 µA mA pF V/µs V UNITS VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Typical thermal resistance, junction to PCB Maximum thermal resistance, junction to ambient Notes (1) (2) SYMBOL TJ (1), TStg RthJL(2) RthJA DC operation TEST CONDITIONS VALUES - 55 to 150 40 UNITS °C °C/W 62 dP tot 1 ------------ < ------------- thermal runaway condition for a diode on its own heatsink dT J R thJA Mounted on 1" square PCB www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 93431 Revision: 26-Aug-08 FCSP130ETR FlipKY®, 1 A Vishay High Power Products 160 150 140 130 120 110 100 90 80 Square wave (D = 0.50) 80 % VR applied See note (1) 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 DC D = 3/4 D = 1/2 D = 1/3 D = 1/4 D = 1/5 1.0 TJ = 150 °C TJ = 125 °C TJ = 25 °C 0.1 0 0.2 0.4 0.6 0.8 1.0 Allowable Case Temperature (°C) 10 IF - Instantaneous Forward Current (A) VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) 100 IF(AV) - Average Forward Current (A) Fig. 4 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) 0.5 IR - Reverse Current (mA) Average Power Loss (W) TJ = 150 °C 10 TJ = 125 °C 0.4 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC 1 TJ = 100 °C TJ = 75 °C 0.3 0.1 0.2 RMS limit TJ = 50 °C 0.01 0.1 TJ = 25 °C 0.001 0 0 5 10 15 20 25 30 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) 1000 IF(AV) - Average Forward Current (A) Fig. 5 - Forward Power Loss Characteristics (Per Leg) 1000 CT - Junction Capacitance (pF) TJ = 25 °C 100 IFSM - Non-Repetitive Surge Current (A) At any rated load condition and with rated VRRM applied following surge 100 10 10 0 5 10 15 20 25 30 10 100 1000 10 000 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) (1) tp - Square Wave Pulse Duration (µs) Fig. 6 - Maximum Non-Repetitive Surge Current (Per Leg) Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at 80 % VR applied Document Number: 93431 Revision: 26-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 FCSP130ETR Vishay High Power Products FlipKY®, 1 A L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V D.U.T. IRFP460 Rg = 25 Ω Current monitor Fig. 7 - Unclamped Inductive Test Circuit LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information http://www.vishay.com/doc?95359 http://www.vishay.com/doc?95281 http://www.vishay.com/doc?95062 www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 93431 Revision: 26-Aug-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1