TLMS3100

VISHAY TLMS310. Vishay Semiconductors SMD LED in PLCC-2 Package Description These devices have been designed to meet the increasing demand for surface mounting technology. The package of the TLMS310. is the PLCC-2 (equivalent to a size B tantalum capacitor). It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. 19225 Features • SMD LEDs with exceptional brightness • • • • • • • • • • Luminous intensity categorized Compatible with automatic placement equipment EIA and ICE standard package Compatible with infrared, vapor phase and wave solder processes according to CECC Available in 8 mm tape Low profile package Non-diffused lens: excellent for coupling to light pipes and backlighting Low power consumption Luminous intensity ratio in one packaging unit IVmax/IVmin ≤ 2.0, optional ≤ 1.6 Lead-free device e3 Pb Pb-free Applications Automotive: Backlighting in dashboards and switches Telecommunication: Indicator and backlighting in telephone and fax Indicator and backlight for audio and video equipment Indicator and backlight in office equipment Flat backlight for LCDs, switches and symbols General use Parts Table Part TLMS3100 TLMS3101 Color, Luminous Intensity Red, IV > 2.5 mcd Red, IV = (4 to 12.5) mcd Angle of Half Intensity (±ϕ) 60 ° 60 ° Technology GaAsP on GaP GaAsP on GaP Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified TLMS310. Parameter Reverse voltage DC Forward current Surge forward current Power dissipation Junction temperature Operating temperature range Tamb ≤ 60 °C tp ≤ 10 µs Tamb ≤ 60 °C Test condition Symbol VR IF IFSM PV Tj Tamb Value 6 30 0.5 100 100 - 40 to + 100 Unit V mA A mW °C °C Document Number 83170 Rev. 1.4, 31-Aug-04 www.vishay.com 1 TLMS310. Vishay Semiconductors Parameter Storage temperature range Soldering temperature Thermal resistance junction/ ambient t≤5s mounted on PC board (pad size > 16 mm2) Test condition Symbol Tstg Tsd RthJA Value - 40 to + 100 260 400 VISHAY Unit °C °C K/W Optical and Electrical Characteristics Tamb = 25 °C, unless otherwise specified Red TLMS310. Parameter Luminous intensity 1) Dominant wavelength Peak wavelength Angle of half intensity Forward voltage Reverse voltage Junction capacitance Temperature coefficient of VF Temperature coefficient of λd 1) Test condition IF = 10 mA IF = 10 mA IF = 10 mA IF = 10 mA IF = 20 mA IR = 10 µA VR = 0, f = 1 MHz IF = 20 mA IF = 10 mA Part TLMS3100 TLMS3101 Symbol IV IV λd λp ϕ VF VR Cj TCVF TCλd Min 2.5 4 624 Typ. 7.5 Max 12.5 636 Unit mcd nm nm deg 640 ± 60 2.0 6 7.0 - 1.8 0.05 2.6 V V pF mV/K nm/K in one Packing Unit IVmax/IVmin ≤ 1.6 Typical Characteristics (Tamb = 25 °C unless otherwise specified) 125 P - Power Dissipation ( mW ) V 60 IF - Forward Current ( mA) 100 75 50 25 0 50 40 30 20 10 0 0 20 40 60 80 100 0 20 40 60 80 100 95 10905 95 10904 Tamb - Ambient Temperature ( °C ) Tamb - Ambient Temperature ( °C ) Figure 1. Power Dissipation vs. Ambient Temperature Figure 2. Forward Current vs. Ambient Temperature for InGaN www.vishay.com 2 Document Number 83170 Rev. 1.4, 31-Aug-04 VISHAY TLMS310. Vishay Semiconductors 10000 I F - Forward Current ( mA ) t p /T = 0.005 1000 0.01 Tamb < 60 °C IVrel–Relative Luminous Intensity 2.0 1.6 1.2 0.8 0.4 0.0 0.02 0.05 100 0.2 0.5 DC 0.1 10 1 0.01 95 9985 0.1 1 10 100 16635 0 20 40 60 80 100 t p - Pulse Length ( ms ) Tamb – Ambient Temperature ( °C ) Figure 3. Pulse Forward Current vs. Pulse Duration Figure 6. Rel. Luminous Intensity vs. Ambient Temperature 0° I V re l - Relative Luminous Intensity 10° 20° 30° n VF – Change of Forward Voltage (mV) 200 150 100 50 0 –50 –100 –150 –200 –250 –300 0 20 40 60 80 100 Tamb – Ambient Temperature ( °C ) 1.0 0.9 0.8 0.7 0.6 40° 50° 60° 70° 80° 0.6 0.4 0.2 0 0.2 0.4 95 10319 16636 Figure 4. Rel. Luminous Intensity vs. Angular Displacement Figure 7. Change of Forward Voltage vs. Ambient Temperature 100 n l d – Change of Dom. Wavelength (nm) 5 4 3 2 1 0 –1 –2 –3 0 20 40 60 80 100 Tamb – Ambient Temperature ( °C ) I F - Forward Current ( mA ) 10 1 0.1 0 16634 1 2 3 4 5 16637 VF - Forward Voltage ( V ) Figure 5. Forward Current vs. Forward Voltage Figure 8. Change of Dominant Wavelength vs. Ambient Temperature Document Number 83170 Rev. 1.4, 31-Aug-04 www.vishay.com 3 TLMS310. Vishay Semiconductors VISHAY 10.00 IVrel–Relative Luminous Intensity IVrel–Relative Luminous Intensity 1.2 1.0 0.8 0.6 0.4 0.2 0.0 550 16639 1.00 0.10 0.01 1.00 16638 10.00 VF – Forward Current ( mA ) 100.00 590 630 670 710 750 l – Wavelength ( nm ) Figure 9. Relative Luminous Intensity vs. Forward Current Figure 10. Relative Intensity vs. Wavelength Package Dimensions in mm 3.5 ± 0.2 + 0.10 1.65- 0.05 technical drawings according to DIN specifications 0.85 Mounting Pad Layout Pin identification 1.2 area covered with solder resist 2.6 (2.8) + 0.15 2.2 C A 2.8 4 1.6 (1.9) ∅ 2.4 3 + 0.15 Dimensions: IR and Vaporphase (Wave Soldering) Drawing-No. : 6.541-5025.01-4 Issue: 7; 05.04.04 95 11314 www.vishay.com 4 4 Document Number 83170 Rev. 1.4, 31-Aug-04 VISHAY Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. TLMS310. Vishay Semiconductors 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 Document Number 83170 Rev. 1.4, 31-Aug-04 www.vishay.com 5 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1