Dimensions: [mm]
Recommended Land Pattern: [mm]
Absolute Maximum Ratings (Ambient Temperature 25°C):
Properties
2,2 ±0,2
2
PDiss
Peak Forward Current
IF Peak
Continuous Forward Current
Reverse Voltage
1
2
2,4
1
4,45
1,25
Test conditions
Power Dissipation
ESD Threshold/ Human Body
Model
1,7 ±0,2
duty/ 10 @ 1 kHz
Value
Unit
105
mW
100
mA
IF
30
mA
VREV
5
V
VESD HBM
1000
V
0,9 ±0,1
Optical Properties:
Chip Technology
Emitting Color
Blue
Lens Type
1,9 ±0,2
0,15 typ.
3,2 ±0,2
Scale - 7:1
Top LED
Plastic Housing Color
White
Schematic:
3,5 ±0,2
General Information:
Polarity Mark
(Cathode)
Operating Temperature
2
2,8 ±0,2
1
InGaN
1
+
2
-40 up to +85 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 90 % RH
Storage Conditions (for single
parts)
-40 up to +85 °C
Moisture Sensitivity Level (MSL)
O 2,4 ±0,2
3
Scale - 7:1
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PLD
002.010
2021-03-01
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMTW SMT Mono-color TOP
LED Waterclear
ORDER CODE
150141BS73100
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3528
eiPal
Valid
1/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Electrical & Optical Properties:
Properties
Test conditions
Peak Wavelength
λPeak
20 mA
Dominant Wavelength
Viewing Angle:
Value
min.
typ.
465
λDom
20 mA
Luminous Intensity
IV
20 mA
Forward Voltage
VF
20 mA
3.2
Spectral Bandwidth
Δλ
20 mA
25
Reverse Current
IREV
5V
Viewing Angle Phi 0°
2θ50% 20 mA
max.
200
Unit
nm
470
nm
270
mcd
3.5
nm
10
120
V
µA
°
0°
- 60°
10°
100
Certification:
Compliant [2011/65/EU&2015/863]
REACh Approval
Conform or declared [(EC)1907/2006]
Conform [IEC 61249-2-21]
Halogen Free
Conform [JEDEC JS709B]
Photobiological Safety
IEC-62471 [ Risk Group 1 ]
Relative Luminous Intensity [%]
RoHS Approval
Halogen Free
20°
30°
90
40°
80
45°
70
50°
60
50
60°
40
70°
30
20
80°
10
90°
-90
-45
0
10
20
30
40
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PLD
002.010
2021-03-01
DIN ISO 2768-1m
50
60
70
80
90
100
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMTW SMT Mono-color TOP
LED Waterclear
ORDER CODE
150141BS73100
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3528
eiPal
Valid
2/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Spectral:
Forward Current vs. Forward Voltage:
35
30
100
25
Forward Current [mA]
Relative Intensity [%]
80
60
40
20
20
15
10
0
400
450
500
550
600
650
700
750
Wavelength [nm]
5
0
0.0
0.5
1.0
1.5
2.0
2.5
Forward Voltage [V]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PLD
002.010
2021-03-01
DIN ISO 2768-1m
3.0
3.5
4.0
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMTW SMT Mono-color TOP
LED Waterclear
ORDER CODE
150141BS73100
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3528
eiPal
Valid
3/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Luminous Intensity vs. Forward Current:
Derating Curve:
500
40
450
35
400
30
Forward Current [mA]
Luminous Intensity [mcd]
350
300
250
200
25
20
15
10
150
100
5
50
0
0
20
40
60
80
100
0
0
5
10
15
20
Forward Current [mA]
25
30
Ambient Temperature [°C]
35
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PLD
002.010
2021-03-01
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMTW SMT Mono-color TOP
LED Waterclear
ORDER CODE
150141BS73100
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3528
eiPal
Valid
4/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape and Reel: [mm]
W3
P0
P2
T
W1
close to center
A
W
F
B0
E2
C
Top Cover
Tape
A
D1
N
E1
B
D
D0
A
K0
P1
W2
T1
A0
T2
Polarity Mark
Cathode
Feeding direction
End
Start
detail B
Carrier Tape
B
Cover Tape
Cover Tape
Chip Cavity
Sprocket Hole
No Component
min.160mm
Components
No Component
min.100mm
Embossment
Cover Tape
min. 400mm
tolerance
size
A0 B0 W
typ. typ. +0,3/ -0,1
3528 3,05 3,75 8,0
T
T1
T2
K0 P0
P1
P2
D0
ref. max. typ. typ. ±0,1 ±0,1 ±0,05 +0,1/ -0,0
0,25 0,1 1,07 0,91 4,0 4,0 2,0
1,5
D1 E1
E2
F
Tape Type 2a
min. ±0,1 min. ±0,05
0,3 1,75 6,25 3,5
Polystyrene
VPE / packaging unit
pcs.
2000
165° - 180°
Tolerance
Tape width
8 mm
A
± 2,0
178
B
min.
1.5
C
min.
12.8
D
min.
20.2
N
min.
50
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PLD
002.010
2021-03-01
DIN ISO 2768-1m
W1
+1,5
8.4
W2
max.
14.4
W3
min.
7.9
W3
max.
10.9
PROJECTION
METHOD
DESCRIPTION
Pull-of force
Tape width
8 mm
0,1 N - 1,0 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMTW SMT Mono-color TOP
LED Waterclear
ORDER CODE
150141BS73100
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3528
eiPal
Valid
5/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
Ts min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
Liquidous Temperature
tL
Preheat Area
TC –5°C
Value
Preheat Temperature Min
max. 60 - 120 seconds
3 °C/ second max.
TL
217 °C
Time tL maintained above TL
tL
max. 60 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
max. 10 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
max. 220 seconds
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Applied cycles
Volume mm³