HCSK2725FT1L00

HCSK Series Stackpole Electronics, Inc. Kelvin Termination Metal Element Current Shunt Resistor Resistive Product Solutions Features: • • • • • • • Metal element current shunt resistor 5W permanent power Inductance < 3nH Internal heat resistance 15K/W 100% RoHS compliant and lead free without exemption Halogen free REACH compliant Applications: • • • • Power modules Frequency converters Current sensor for power hybrid sources High current handling for automotive engine controls and power management Electrical Specifications Type / Code Power Rating (W) 5 3 5 3 2 5 HCSK1216 HCSK2725 HCSK4026 Ohmic Range (Ω) and Tolerance 1% and 5% 0.0005 0.001 0.0005 - 0.002 0.003 0.004, 0.005 0.0002, 0.0005 0.0007 0.001 0.003 TCR (ppm/ºC) ± 50 ± 50 4 ± 50 3 Mechanical Specifications – 1216 Type / Code HCSK1216 Type / Code HCSK1216 L B C H 0.150 ± 0.012 3.81 ± 0.30 F 0.118 ± 0.006 3.00 ± 0.15 G 0.037 ± 0.006 0.95 ± 0.15 0.071 ± 0.004 1.80 ± 0.10 D1 Unit 0.024 ± 0.006 0.60 ± 0.15 0.106 ± 0.004 2.70 ± 0.10 0.012 ± 0.004 0.30 ± 0.10 inches mm (*) A 0.041 1.05 E 0.020 ± 0.004 0.50 ± 0.10 Unit inches mm (*) Reference only. Rev Date: 8/3/2021 This specification may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 1 www.seielect.com marketing@seielect.com HCSK Series Stackpole Electronics, Inc. Kelvin Termination Metal Element Current Shunt Resistor Resistive Product Solutions Mechanical Specifications – 2725 Type / Code HCSK2725 (0.0005) HCSK2725 (0.001) HCSK2725 (0.002) HCSK2725 (0.003) HCSK2725 (0.004) HCSK2725 (0.005) Type / Code HCSK2725 (0.0005) HCSK2725 (0.001) HCSK2725 (0.002) HCSK2725 (0.003) HCSK2725 (0.004) HCSK2725 (0.005) (*) Reference only. 0.260 6.60 0.260 6.60 0.260 6.60 0.260 6.60 0.260 6.60 0.260 6.60 0.039 1.00 0.039 1.00 0.039 1.00 0.039 1.00 0.039 1.00 0.039 1.00 L ± ± ± ± ± ± ± ± ± ± ± ± F ± ± ± ± ± ± ± ± ± ± ± ± B 0.272 ± 0.006 6.90 ± 0.15 0.272 ± 0.006 6.90 ± 0.15 0.272 ± 0.006 6.90 ± 0.15 0.272 ± 0.006 6.90 ± 0.15 0.272 ± 0.006 6.90 ± 0.15 0.272 ± 0.006 6.90 ± 0.15 G (*) 0.193 4.90 0.193 4.90 0.193 4.90 0.193 4.90 0.193 4.90 0.193 4.90 0.010 0.25 0.010 0.25 0.010 0.25 0.010 0.25 0.010 0.25 0.010 0.25 0.008 0.20 0.008 0.20 0.008 0.20 0.008 0.20 0.008 0.20 0.008 0.20 (*) C 0.122 3.10 0.122 3.10 0.122 3.10 0.122 3.10 0.122 3.10 0.122 3.10 A 0.075 ± 0.008 1.90 ± 0.20 0.075 ± 0.008 1.90 ± 0.20 0.075 ± 0.008 1.90 ± 0.20 0.075 ± 0.008 1.90 ± 0.20 0.075 ± 0.008 1.90 ± 0.20 0.075 ± 0.008 1.90 ± 0.20 H ± 0.008 ± 0.20 ± 0.008 ± 0.20 ± 0.008 ± 0.20 ± 0.008 ± 0.20 ± 0.008 ± 0.20 ± 0.008 ± 0.20 D1 0.016 ± 0.004 0.40 ± 0.10 0.016 ± 0.004 0.40 ± 0.10 0.016 ± 0.004 0.40 ± 0.10 0.016 ± 0.004 0.40 ± 0.10 0.016 ± 0.004 0.40 ± 0.10 0.016 ± 0.004 0.40 ± 0.10 0.094 2.40 0.094 2.40 0.094 2.40 0.094 2.40 0.094 2.40 0.094 2.40 E ± 0.008 ± 0.20 ± 0.008 ± 0.20 ± 0.008 ± 0.20 ± 0.008 ± 0.20 ± 0.008 ± 0.20 ± 0.008 ± 0.20 D2 0.018 ± 0.004 0.45 ± 0.10 0.014 ± 0.004 0.35 ± 0.10 0.022 ± 0.004 0.55 ± 0.10 0.014 ± 0.004 0.35 ± 0.10 0.014 ± 0.004 0.35 ± 0.10 0.014 ± 0.004 0.35 ± 0.10 0.028 0.70 0.028 0.70 0.028 0.70 0.028 0.70 0.028 0.70 0.028 0.70 Unit inches mm inches mm inches mm inches mm inches mm inches mm Unit inches mm inches mm inches mm inches mm inches mm inches mm Mechanical Specifications – 4026 Type / Code HCSK4026 (0.0002 Ω) HCSK4026 (except 0.0002 Ω) Type / Code HCSK4026 (all Ω values) A B C E 0.055 ± 0.008 1.40 ± 0.20 0.272 6.90 0.024 0.60 0.008 0.20 G (max.) 0.028 0.70 I 0.028 0.70 J 0.039 1.00 K 0.193 4.90 Rev Date: 8/3/2021 This specification may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 2 H ± ± ± ± L 0.398 ± 10.10 ± 0.148 3.75 0.104 2.65 0.008 0.20 0.008 0.20 0.006 0.15 T F 0.017 ± 0.004 0.42 ± 0.10 0.197 5.00 Unit inches mm inches mm W Unit 0.260 ± 0.008 inches 6.60 ± 0.20 mm www.seielect.com marketing@seielect.com HCSK Series Stackpole Electronics, Inc. Kelvin Termination Metal Element Current Shunt Resistor Resistive Product Solutions Environmental Performance Characteristics Test Test Method Test Specification Test Condition Short Time Overload - Δ R: ± 1% Temperature Coefficient of Resistance (TCR) (1216, 4026) JIS-C5202-5.2 Refer to Electrical Specifications 5 times rated power for 5 seconds +20°C/+125ºC Temperature Coefficient of Resistance (TCR) (2725) JIS-C5202-5.2 Refer to Electrical Specifications Moisture Resistance MIL-STD-202, Method 106 Δ R: ± 1% High Temperature Exposure JIS-C5202-7.2 Δ R: ± 1% Load Life JIS-C5202-7.10 Δ R: ± 1% TCR (ppm/ºC ) = ΔR RxΔt x 106 +25°C/+125ºC TCR (ppm/ºC ) = ΔR RxΔt x 106 The specimens shall be placed in a chamber and subjected to a relative humidity of 90 ~ 98% and a temperature of 25ºC/65ºC, 10 cycles. The chip (mounted on board) is exposed in the heat chamber, 125ºC for 1000 hours. Apply rated power for 1000 hours with 1.5 hours ON and 0.5 hour OFF. The chip (mounted on board) is exposed, -55 ± 3ºC (30 minutes)/+125 ± 2ºC (30 minutes) for 5 cycles. The following conditions shown in the figure below. Rapid Change of Temperature JIS-C5202-7.4 Δ R: ± 1% Note: The terminal electron temperature of component should be below 100°C. Storage Conditions: Temperature of 22 ~ 28°C. Humidity: 40 ~ 75%. Operating Temperature Range is - 55°C to + 170°C Power Derating Curve: 100 -55 ºC 100 °C 110 °C 100 -55 ºC 70 °C Percent Rated Power (%) Percent Rated Power (%) 1216 2725, 4026 80 60 40 20 All 80 60 40 20 170 ºC 170 ºC 0 -60 0 20 40 60 80 100 120 140 160 0 -60 180 Rev Date: 8/3/2021 This specification may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 0 20 40 60 80 100 120 140 160 180 Ambient Temperature (ºC) Terminal Temperature (ºC) 3 www.seielect.com marketing@seielect.com HCSK Series Stackpole Electronics, Inc. Kelvin Termination Metal Element Current Shunt Resistor Resistive Product Solutions Function Performance Characteristics Test Test Method Test Specification Test Condition Mount the chip to test 90 mm (L) * 40 mm (W) FR4 printed circuit board substrate. Apply pressure in direction of arrow unit band width reaches 2 mm (+0.2 / -0 mm) illustrated in the figure below and hold for 10 ± 1 seconds. Bending Strength JIS-C5202-6.1 Δ R: ± 1% The part shall be immersed into the flux specified in the solder bath 235ºC ± 5ºC for 2 seconds ± 0.5 seconds. It shall be immersed to a point 10 mm from its root. (Sn96.5/Ag3.0/Cu0.5) Solderability JIS-C5202-6.11 Solder shall cover 95% or more of the electrode area. Taping Specifications – Embossed Plastic Tape Type / Code A B E F W Unit HCSK1216 0.130 ± 0.004 3.30 ± 0.10 P0 0.165 ± 0.004 4.20 ± 0.10 P1 0.104 ± 0.004 2.64 ± 0.10 P2 0.217 ± 0.004 5.50 ± 0.10 D0 0.472 ± 0.008 12.00 ± 0.20 T inches mm Unit Type / Code 0.157 ± 0.004 4.00 ± 0.10 A 0.315 ± 0.004 8.00 ± 0.10 B 0.079 ± 0.002 2.00 ± 0.05 E 0.059 ± 0.004 1.50 ± 0.10 F 0.083 ± 0.004 2.10 ± 0.10 W inches mm Unit HCSK2725 0.276 ± 0.004 7.00 ± 0.10 P0 0.276 ± 0.004 7.00 ± 0.10 P1 0.069 ± 0.004 1.75 ± 0.10 P2 0.295 ± 0.004 7.50 ± 0.10 D0 0.630 ± 0.008 16.00 ± 0.20 T inches mm Unit 0.157 ± 0.004 4.00 ± 0.10 0.472 ± 0.004 12.00 ± 0.10 0.079 ± 0.004 2.00 ± 0.10 0.059 ± 0.004 1.50 ± 0.10 0.122 ± 0.004 3.10 ± 0.10 inches mm Rev Date: 8/3/2021 This specification may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 4 www.seielect.com marketing@seielect.com HCSK Series Stackpole Electronics, Inc. Kelvin Termination Metal Element Current Shunt Resistor Resistive Product Solutions Taping Specifications – Embossed Plastic Tape (cont.) Type / Code HCSK4026 (all Ω values) Type / Code HCSK4026 (0.0002 Ω) HCSK4026 (except 0.0002 Ω) A 0.272 ± 0.004 6.90 ± 0.10 P0 B 0.409 ± 0.004 10.40 ± 0.10 P1 E 0.069 ± 0.004 1.75 ± 0.10 P2 F 0.453 ± 0.004 11.50 ± 0.10 D0 0.157 ± 0.004 4.00 ± 0.10 0.472 ± 0.004 12.00 ± 0.10 0.079 ± 0.004 2.00 ± 0.10 0.059 ± 0.004 1.50 ± 0.10 W 0.945 ± 0.012 24.00 ± 0.30 T 0.165 ± 0.004 4.20 ± 0.10 0.126 ± 0.004 3.20 ± 0.10 Unit inches mm Unit inches mm inches mm Recommended Pad Layouts Type / Code HCSK1216 HCSK2725 HCSK4026 0.059 1.50 0.114 2.90 0.063 1.60 a ± ± ± ± ± ± 0.004 0.10 0.008 0.20 0.008 0.20 0.024 0.60 0.079 2.00 0.272 6.90 b ± ± ± ± ± ± 0.004 0.10 0.008 0.20 0.008 0.20 0.059 1.50 0.114 2.90 0.063 1.60 c ± ± ± ± ± ± 0.004 0.10 0.008 0.20 0.008 0.20 0.028 0.70 0.035 0.90 0.028 0.70 e ± ± ± ± ± ± 0.004 0.10 0.004 0.10 0.004 0.10 0.020 0.50 0.039 1.00 0.039 1.00 f ± ± ± ± ± ± 0.004 0.10 0.004 0.10 0.004 0.10 0.116 2.95 0.220 5.60 0.193 4.90 g ± ± ± ± ± ± 0.004 0.10 0.008 0.20 0.008 0.20 Unit inches mm inches mm inches mm Soldering Recommendations: • • Peak reflow temperatures and durations ▪ IR Reflow Peak = 260ºC max for 10 seconds ▪ Not suitable for wave soldering Recommended IR reflow profile: RoHS Compliance Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the various regulatory requirements now prevalent, such as the European Union’s directive regarding “Restrictions on Hazardous Substances” (RoHS 3). As part of this ongoing program, we periodically update this document with the status regarding the availability of our compliant components. All our standard part numbers are compliant to EU Directive 2011/65/EU of the European Parliament as amended by Directive (EU) 2015/863/EU as regards the list of restricted substances. RoHS Compliance Status Standard Product Series Description HCSK Kelvin Termination Current Shunt Resistor Package / Standard Termination Series RoHS Type Compliant Rev Date: 8/3/2021 This specification may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. SMD YES 5 Lead-Free Termination Composition Lead-Free Mfg. Effective Date (Std Product Series) Lead-Free Effective Date Code (YY/WW) 100% Copper Always Always www.seielect.com marketing@seielect.com HCSK Series Stackpole Electronics, Inc. Kelvin Termination Metal Element Current Shunt Resistor Resistive Product Solutions “Conflict Metals” Commitment We at Stackpole Electronics, Inc. are joined with our industry in opposing the use of metals mined in the “conflict region” of the eastern Democratic Republic of the Congo (DRC) in our products. Recognizing that the supply chain for metals used in the electronics industry is very complex, we work closely with our own suppliers to verify to the extent possible that the materials and products we supply do not contain metals sourced from this conflict region. As such, we are in compliance with the requirements of Dodd-Frank Act regarding Conflict Minerals. Compliance to “REACH” We certify that all passive components supplied by Stackpole Electronics, Inc. are SVHC (Substances of Very High Concern) free and compliant with the requirements of EU Directive 1907/2006/EC, “The Registration, Evaluation, Authorization and Restriction of Chemicals”, otherwise referred to as REACH. Contact us for complete list of REACH Substance Candidate List. Environmental Policy It is the policy of Stackpole Electronics, Inc. (SEI) to protect the environment in all localities in which we operate. We continually strive to improve our effect on the environment. We observe all applicable laws and regulations regarding the protection of our environment and all requests related to the environment to which we have agreed. We are committed to the prevention of all forms of pollution. How to Order 1 2 3 4 5 6 7 8 9 10 11 12 13 13 H C S K 2 7 2 5 F T 1 L 0 0 Product Series HCSK Size 1216 2725 4026 Tolerance Code Tol F 1% J 5% Code T Packaging Description Embossed Plastic Tape Resistance Value Size 1216 2725, 4026 Quantity 3000 1400 Four characters with "L" used as multiplier of 10-3 for any value under 0.1 ohm 0.0005 ohm = L500 0.001 ohm = 1L00 Rev Date: 8/3/2021 This specification may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 6 www.seielect.com marketing@seielect.com