UHVB2010FCD1G00

UHV Series Stackpole Electronics, Inc. Ultra-High Voltage Chip Resistor Resistive Product Solutions Features: • • • • • • • • • Voltage ratings to 20000 Volts Resistance values to 10 Gohms Ultra-high stability Very low noise Tolerances to 1% Tolerances 10% and wider are typically untrimmed TCR to 100 ppm/ºC RoHS compliant and halogen free REACH compliant Electrical Specifications Ohmic Range (Ω) and Tolerance 1%, 2%, 5%, 10%, 20% 3000 100 M - 158 M 100 UHV2010 4000 162 M - 357 M 200 6000 365 M - 10 G 4000 121 M - 249 M 100 6000 255 M - 442 M UHV2512 200 8000 453 M - 698 M 10000 715 M - 10 G 4000 100 M - 196 M 6000 200 M - 324 M 100 8000 332 M - 523 M UHV3512 200 10000 536 M - 732 M 12000 750 M - 976 M 14000 1 G - 10 G 6000 150 M - 249 M 8000 255 M - 392 M 100 10000 402 M - 562 M UHV4020 200 12000 576 M - 768 M 14000 787 M - 976 M 16000 1 G - 10 G 6000 100 M - 158 M 8000 162 M - 249 M 10000 255 M - 357 M 100 UHV5020 12000 365 M - 487 M 200 14000 499 M - 634 M 16000 649 M - 976 M 20000 1 G - 10 G Due to the high resistance values offered, the power rating for a given size and resistance value should be calculated by V2/R. Because of the high voltage ratings, these resistors should be potted to ensure terminal isolation. Type / Code TCR (ppm/ºC) Maximum Working Voltage (V) Mechanical Specifications Type / Code UHV2010 UHV2512 L Body Length 0.200 ± 0.010 5.08 ± 0.25 W Body Width 0.100 ± 0.005 2.54 ± 0.13 Thickness (Max.) 0.030 0.76 DT Top Termination 0.018 ± 0.010 0.46 ± 0.25 DB Bottom Termination 0.020 ± 0.010 0.51 ± 0.25 inches mm 0.250 ± 0.010 6.35 ± 0.25 0.125 ± 0.005 3.18 ± 0.13 0.030 0.76 0.020 ± 0.010 0.51 ± 0.25 0.024 ± 0.010 0.61 ± 0.25 inches mm Rev Date: 11/18/2020 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 1 Unit www.seielect.com marketing@seielect.com UHV Series Stackpole Electronics, Inc. Ultra-High Voltage Chip Resistor Resistive Product Solutions Mechanical Specifications (cont.) Type / Code UHV3512 UHV4020 UHV5020 L Body Length 0.350 ± 0.010 8.89 ± 0.25 0.400 ± 0.010 10.16 ± 0.25 W Body Width 0.125 ± 0.005 3.18 ± 0.13 0.200 ± 0.005 5.08 ± 0.13 Thickness (Max.) 0.030 0.76 0.030 0.76 DT Top Termination 0.020 ± 0.010 0.51 ± 0.25 0.025 ± 0.010 0.64 ± 0.25 DB Bottom Termination 0.024 ± 0.010 0.61 ± 0.25 0.030 ± 0.010 0.76 ± 0.25 inches mm inches mm 0.500 ± 0.010 12.70 ± 0.25 0.200 ± 0.005 5.08 ± 0.13 0.030 0.76 0.030 ± 0.010 0.76 ± 0.25 0.030 ± 0.010 0.76 ± 0.25 inches mm Unit Performance Characteristics Test Typical Performance Short Time Overload Load Life Temperature Cycle Moisture Resistance Shock Vibration Dielectric Withstanding Voltage Resistance to Soldering Heat Parameter 0.5% 0.5% 0.5% 0.5% 0.25% 0.25% 0.25% 0.25% Typical TCR Pulse Capability Measured from 25°C to 75°C Consult Stackpole for pulse applications Measured at 100V Consult Stackpole for custom test voltages Resistance Value Operating temperature range is -55ºC to +150ºC Load Life Rev Date: 11/18/2020 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 2 www.seielect.com marketing@seielect.com UHV Series Stackpole Electronics, Inc. Ultra-High Voltage Chip Resistor Resistive Product Solutions VCR Curves Recommended Solder Profile This information is intended as a reference for solder profiles for Stackpole resistive components. These profiles should be compatible with most soldering processes. These are only recommendations. Actual numbers will depend on board density, geometry, packages used, etc., especially those cells labeled with “*”. 100% Matte Tin / RoHS Compliant Terminations Soldering iron recommended temperatures: 330°C to 350°C with minimum duration. Maximum number of reflow cycles: 3. Wave Soldering Description Maximum Recommended Preheat Time 80 seconds 70 seconds Temperature Diff. 140°C 120°C Solder Temp. 260°C 250°C Dwell Time at Max. 10 seconds 5 seconds Ramp DN (°C/sec) N/A N/A Temperature Diff. = Defference between final preheat stage and soldering stage. Rev Date: 11/18/2020 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 3 Minimum 60 seconds 100°C 240°C * N/A www.seielect.com marketing@seielect.com UHV Series Stackpole Electronics, Inc. Ultra-High Voltage Chip Resistor Resistive Product Solutions Convection IR Reflow Description Maximum Recommended Minimum Ramp Up (°C/sec) Dwell Time > 217°C Solder Temp. Dwell Time at Max. Ramp DN (°C/sec) 3°C/sec 150 seconds 260°C 30 seconds 6°C/sec 2°C/sec 90 seconds 245°C 15 seconds 3°C/sec * 60 seconds * 10 seconds * Recommended Lead Free Resistor Reflow Profile RoHS Compliance Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the various regulatory requirements now prevalent, such as the European Union’s directive regarding “Restrictions on Hazardous Substances” (RoHS 3). As part of this ongoing program, we periodically update this document with the status regarding the availability of our compliant components. All our standard part numbers are compliant to EU Directive 2011/65/EU of the European Parliament as amended by Directive (EU) 2015/863/EU as regards the list of restricted substances. RoHS Compliance Status Standard Product Series Description Package / Standard Termination Series RoHS Type Compliant UHV Ultra-High Voltage Chip Resistor SMD Note (1): RoHS compliant by means of exemption 7c-I. YES(1) Lead-Free Termination Composition Lead-Free Mfg. Effective Date (Std Product Series) Lead-Free Effective Date Code (YY/WW) 100% Matte Sn over Ni Always Always “Conflict Metals” Commitment We at Stackpole Electronics, Inc. are joined with our industry in opposing the use of metals mined in the “conflict region” of the eastern Democratic Republic of the Congo (DRC) in our products. Recognizing that the supply chain for metals used in the electronics industry is very complex, we work closely with our own suppliers to verify to the extent possible that the materials and products we supply do not contain metals sourced from this conflict region. As such, we are in compliance with the requirements of Dodd-Frank Act regarding Conflict Minerals. Rev Date: 11/18/2020 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 4 www.seielect.com marketing@seielect.com UHV Series Stackpole Electronics, Inc. Ultra-High Voltage Chip Resistor Resistive Product Solutions Compliance to “REACH” We certify that all passive components supplied by Stackpole Electronics, Inc. are SVHC (Substances of Very High Concern) free and compliant with the requirements of EU Directive 1907/2006/EC, “The Registration, Evaluation, Authorization and Restriction of Chemicals”, otherwise referred to as REACH. Contact us for complete list of REACH Substance Candidate List. Environmental Policy It is the policy of Stackpole Electronics, Inc. (SEI) to protect the environment in all localities in which we operate. We continually strive to improve our effect on the environment. We observe all applicable laws and regulations regarding the protection of our environment and all requests related to the environment to which we have agreed. We are committed to the prevention of all forms of pollution. How to Order 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 U H V B 3 5 1 2 F K D 5 0 0 M Product Series Solderable wraparound (matte tin Sn99.9 UHVB on nickel barrier) RoHS Compliant Solderable wraparound (Sn63Pb37 solder over UHVS nickel barrier) Not RoHS Compliant Size Tolerance 2010 Code Tol 2512 F 1% 3512 G 2% 4020 J 5% 5020 K 10% M 20% Rev Date: 11/18/2020 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. Code T K D C Packaging TCR Description Size Quantity Code ppm Tape and Reel 2010 4000 D 100 Plastic Tape 2512 2000 L 200 Tape and Reel All Sizes 1000 Plastic Tape Tape and Reel All Sizes 500 Plastic Tape Tape and Reel All Sizes 250 Plastic Tape 5 Resistance Value Four characters with the multiplier used as the decimal holder. 90 Mohm = 90M0 250 Mohm = 250M 1 Gohm = 1G00 www.seielect.com marketing@seielect.com