FP2-V100-R

Technical Data 4110 Effective December 2015 Supersedes July 2014 FP2 Low profile, high current power inductors Applications Product description • High current carrying capacity • Dual conductors allow for low inductance and high current or high inductance and lower current • Inductance range from 0.047uH to 0.480uH • Current range 9.0 to 42 Amps • 7.2 x 6.7mm footprint surface mount package in a 3.0 or 5.0mm heights • Ferrite core material • Halogen free, lead free, RoHS compliant • Servers • Multi-phase and Vcore regulators • Voltage Regulator Modules (VRMs) • Server and desktop • Central processing unit (CPU) • Graphics processing unit (GPU) • Application specific integrated circuit (ASIC) • High power density • Notebook regulators • Battery power systems • Graphics cards Environmental data • Storage temperature range (component): -40°C to +125°C • Operating temperature range: -40°C to +125°C (Ambient plus self temperature rise) • Solder reflow temperature: J-STD-020D compliant HALOGEN Pb HF FREE FP2 Low profile, high current power inductors  Technical Data 4110 Effective December 2015 Product specifications OCL1 (μH) ±15% lrms2 (amps) lsat3 (amps) DCR (Ω) typical @ 20°C Height maximum Volt-μsec4 (V-μs) FP2-S047-R 0.047 39 42 0.00024 3 0.75 FP2-S068-R 0.068 39 32 0.00024 3 0.75 FP2-S082-R 0.082 39 26 0.00024 3 0.75 FP2-S100-R 0.100 39 22 0.00024 3 0.75 FP2-S120-R 0.120 39 18 0.00024 3 0.75 FP2-S200-R 0.200 37 19 0.00028 5 0.99 FP2-V050-R 0.050 37 70 0.00028 5 0.99 FP2-V100-R 0.100 37 40 0.00028 5 0.99 FP2-V120-R 0.120 37 33 0.00028 5 0.99 FP2-V150-R 0.150 37 25.5 0.00028 5 0.99 FP2-D047-R 0.047 37 42 0.00026 3 0.75 FP2-D068-R 0.068 37 32 0.00026 3 0.75 FP2-D082-R 0.082 37 26 0.00026 3 0.75 FP2-D100-R 0.100 37 22 0.00026 3 0.75 FP2-D120-R 0.120 37 18 0.00026 3 0.75 OCL1 (μH) ±15% lrms2 (amps) lsat3 (amps) DCR (Ω) typical @ 20°C Height maximum Volt-μsec4 (V-μs) FP2-D047-R 0.188 16 21 0.0013 3 1.5 FP2-D068-R 0.272 16 16 0.0013 3 1.5 FP2-D082-R 0.328 16 13 0.0013 3 1.5 FP2-D100-R 0.400 16 11 0.0013 3 1.5 FP2-D120-R 0.480 16 9 0.0013 3 1.5 Part number5 Single conductor Double conductor Series mode Part number5 Double conductor 1. Open Circuit Inductance (OCL) Test parameters: 1.0MHz, 0.25Vrms, ).0Adc, +25°C 2. Irms: DC current for an approximate temperature rise of 40°C without core loss. Derating is necessary for AC currents. PCB layout, trace thickness and width, airflow, and proximity of other heat generating components will affect the temperature rise. It is recommended that the temperature of the part not exceed 125°C under worst case operating conditions verified in the end application. 3. Isat : Peak current for approximately 30% rolloff @ +20°C. 2 www.eaton.com/elx 4. Applied Volt-Time product (V-μs) across the inductor. This value represents the applied V-μs at 500kHz necessary to generate a core loss equal to 10% of the total losses for 40°C temperature rise. 5. Part Number Definition: FP2-xyyy-R FP2 = Product code and size x = Version indicator, S = single conductor, V = single conductor, D = dual conductor yyy = Inductance value in uH, R = decimal point -R suffix = RoHS compliant FP2 Low profile, high current power inductors Technical Data 4110 Effective December 2015  Dimensions–mm Single conductor Dual conductor Part marking: FPS, V or D (S= single conductor, V= single conductor, D= dual conductor), xxx (xxx= inductance value in uH, R= decimal point) yww= date code Tolerances are ±0.2 millimeters unless stated otherwise All soldering surfaces to be coplanar within 0.15 millimeters Do not route traces or vias underneath the inductor Packaging information Supplied in tape and reel packaging. FP2-S,FP2-D: 1,700 parts per 13” diameter reel. FP2-S200, FP2-V: 950 parts per 13” diameter reel. 4.0 min. +0.1/-0.0 2.0 Ao=6.6mm Bo=7.1mm Ko=3.2mm 1 7.5 +/-0.3 Bo 2 (FP2-S,FP2-D) Ko=5.2mm (FP2-S200,FP2-V) 1.75 A Ko A Ao 12.0 Direction of Feed www.eaton.com/elx 3 FP2 Low profile, high current power inductors  Technical Data 4110 Effective December 2015 Inductance characteristics Core loss IRMS DERATING WITH CORE LOSS 20 40 50 60 Hz Hz 0K 10 0K 0K 20 50 0 30 KH z 80 Hz 70 1M Hz % of Losses from Irms (maximum) 0 90 92 94 95 96 97 98 99 10 4 www.eaton.com/elx 20 30 40 50 60 80 100 200 300 % of Applied Volt-μ-Seconds 400 500 600 800 1000 FP2 Low profile, high current power inductors Technical Data 4110 Effective December 2015  Solder reflow profile TP TC -5°C tP Max. Ramp Up Rate = 3°C/s Max. Ramp Down Rate = 6°C/s Temperature TL Preheat A T smax t Table 1 - Standard SnPb Solder (Tc) Package Thickness Volume mm3