VBM-360-48

Additional Resources: Product Page date 12/22/2020 page 1 of 5 SERIES: VBM-360 Ϳ DESCRIPTION: AC-DC POWER SUPPLY FEATURES U ED up to 360 W continuous power baseplate cooling industry standard 3” x 5” footprint universal input (90~264 Vac) single output from 12 to 48V over voltage, short circuit, and over temperature protections built-in active PFC function built-in remote sense function remote on/off control function efficiency up to 93.5% RoHS output voltage (Vdc) VBM-360-12 12 24 48 ripple and noise1 HϒFLHQF\ max (A) max (W) max (mVp-p) W\S (%) 29.6 355 120 92.5 14.8 355 150 93.5 7.4 355 150 93.5 1. at 20 MHz bandwidth oscilloscope, each output terminated with a 47 µF electrolytic and 0.1 µF ceramic capacitors. C O Notes: output power N VBM-360-24 VBM-360-48 output current TI MODEL N • • • • • • • • • • D IS PART NUMBER KEY VBM-360 - XX - XXX Base Number Output Voltage cui.com Chasis “blank” = open frame CNF = enclosed Additional Resources: Product Page CUI Inc Ϳ SERIES: VBM-360 Ϳ DESCRIPTION: AC-DC POWER SUPPLY date 12/22/2020 page 2 of 5 INPUT conditions/description min frequency inrush current at 240 Vac leakage current at 264 Vac max units 90 264 Vac 47 63 Hz 50 A 3.5 mA max units OUTPUT conditions/description min line regulation high line to low line, full load load regulation 60% ±40% rated load voltage accuracy set at 60% rated load and 25°C hold-up time built in trim pot switching frequency WHPSHUDWXUHFRHϒFLHQW 12 Vdc / 0.3A for external fan TI fan drive output PROTECTIONS conditions/description over voltage protection recycle ac input to restart short circuit protection hiccup mode, recovers automatically over temperature protection auto recovery over current protection continuous O SAFETY & COMPLIANCE min N parameter conditions/description ±1 % 12 ms W\S 120 min input to output ±5 % 60 kHz W\S %/°C max units 150 % max units 3,000 Vac IEC 60950-1, EN 60950-1, UL 60950-1 D IS C safety approvals % ±0.05 5 Vdc / 0.5A parameter % ±1 55 standby output isolation voltage ±0.5 N adjustability W\S U parameter W\S ED parameter voltage EMI/EMC EN 55022 Class B, FCC Part 15 Class B, EN 61000-6-(1,3), EN 61000-3-(2,3), EN 55024, EN 61204-3 RoHS compliant yes ENVIRONMENTAL parameter conditions/description min max units operating temperature refer to derating curves for more details -20 85 °C -40 85 °C 93 % storage temperature operating humidity non-condensing cui.com W\S Additional Resources: Product Page CUI Inc Ϳ SERIES: VBM-360 Ϳ DESCRIPTION: AC-DC POWER SUPPLY date 12/22/2020 page 3 of 5 DERATING CURVES VBM-360-CNF (enclosed) Natural Convection (Ambient Temp vs. Load) Natural Convection (Ambient Temp vs. Load) ED VBM-360 (open frame) 220~264 Vac (360W) 100 220~264 Vac (300W) 80 90~200 Vac (240W) Load (%) Load (%) 100 60 40 -20 -10 0 10 20 30 40 50 60 70 -20 0 20 50 60 70 80 85 90 N Natural Convection (Input Voltage vs. Load) 40 °C 360 Load (W) 300 240 180 300 240 180 120 110 130 150 170 N 120 190 210 230 250 90 110 130 Input Voltage (Vac) C O 80 80 Load (%) 100 40 20 0 10 20 IS -10 30 40 50 60 170 190 210 230 250 &)0$LUÀRZ (Ambient Temp vs. Load) 90~264 Vac 100 60 150 Input Voltage (Vac) &)0$LUÀRZ (Ambient Temp vs. Load) 90~264 Vac Load (%) 40 TI 360 -20 30 Ambient Temperature (°C) Natural Convection (Input Voltage vs. Load) 40 °C Load (W) 40 20 Ambient Temperature (°C) 90 60 U 20 90~200 Vac (300W) 80 60 40 20 70 -20 0 20 Ambient Temperature (°C) 30 40 50 60 70 80 85 90 Ambient Temperature (°C) Power Dissipated (W) D Baseplate Cooling (Ambient Temp vs. PD) 90~264 Vac 50 40 30 20 10 -20 10 20 30 40 50 60 Ambient Temperature (°C) cui.com 70 80 85 90 Additional Resources: Product Page CUI Inc Ϳ SERIES: VBM-360 Ϳ DESCRIPTION: AC-DC POWER SUPPLY date 12/22/2020 page 4 of 5 MECHANICAL conditions/description min open frame 5.000 x 3.000 x 1.598 (127.00 x 76.20 x 40.60 mm) enclosed 5.391 x 3.425 x 1.697 (136.94 x 87.00 x 43.10 mm) inch weight 470 1.04 g lbs 550 1.21 g lbs U enclosed MECHANICAL DRAWING Enclosed (CNF) N Open Frame 10 CFM min FAN 10 CFM min FAN TI 0.393[10.00] No pin 3 AC Neutral CN1 L PVHI Series 3 Pin, CTR Pin N Removed -Vo 0.393[10.00] 2 2.551[64.80] AC Line N 1 3.000[76.20] +Vo 0.224[5.70] LED CN1 units inch open frame units: inch[mm] tolerance: ±0.02[±0.5] max 3.425[87.00] dimensions W\S ED parameter 0.224[5.70] 1.697[43.10] 0.062[1.60] 0.079[2.00] C IS D 5.390[136.94] CN2 PIDC254M1L Series 8 Pin 0.157[4.00]max 1.598[40.60]max O 4.551[115.60] 5.000[127.00] CN2 1 +S 8 -S 2 GND 7 enable 3 GND 6 +5 VBS 4 FAN output- 5 FAN output+ 1 1 2 3 4 8 7 6 5 Note: 1. For operation, it is required to pull down enable to activate the power supply (pin 7 tied to pin 2). It is recommended to use a 2.54mm mini shunt jumper. Jumper will need to be removed if using the 8 pin mating plug and tied together internally. 1RWH $OOVSHFL¿FDWLRQVPHDVXUHGDWƒ&9DFLQSXWYROWDJHDQGORDGXQOHVVRWKHUZLVHQRWHG cui.com Additional Resources: Product Page CUI Inc Ϳ SERIES: VBM-360 Ϳ DESCRIPTION: AC-DC POWER SUPPLY date 12/22/2020 page 5 of 5 rev. description date ED REVISION HISTORY 1.0 initial release 1.01 added baseplate cooling to features, updated derating curves 02/04/2013 1.02 corrected mounting hole sizes 05/30/2013 1.03 updated connector note 1.04 company logo updated 01/09/2013 07/15/2013 12/22/2020 D IS C O N TI N U The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com &8,RϑHUVDWZR\HDUOLPLWHGZDUUDQW\&RPSOHWHZDUUDQW\LQIRUPDWLRQLVOLVWHGRQRXUZHEVLWH CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to DϑHFWLWVVDIHW\RUHϑHFWLYHQHVV