MCB1760U

MCB1700 Evaluation Board MCB1760 Evaluation Board The Keil MCB1760 Evaluation Board introduces the new NXP LPC1760 family of ARM Cortex-M3 processor-based devices, allowing you to create and test working programs for this advanced architecture. The MCB1760 has a wide range of interfaces making it a great starting point for your next Cortex-M3 project. MCB1760 Features 100MHz LPC1768 ARM Cortex™-M3 processor-based MCU in 100-pin LQFP On-Chip Memory: 512KB Flash & 64KB RAM Color QVGA TFT LCD 10/100 Ethernet Port USB 2.0 Full Speed - USB, USB-OTG, & USB Host 2 CAN Interfaces 2 Serial Ports SD/MMC Card Interface 5-position Joystick and push-button Analog Voltage Control for ADC Input Amplifier and Speaker 70 GPIO pins Debug Interface Connectors                20 pin JTAG (0.1 inch connector) 10 pin Cortex debug (0.05 inch connector)  20-pin Cortex debug + ETM Trace (0.05 inch connector) System Requirements     PC with one available USB port Windows 2000, XP and Vista One CD-ROM drive ULINK family USB-JTAG Adapter for high-performance Debug/Download (optional) Starter Kit The MCB1760 is also available as a starter kit which includes the ULINK-ME USB-JTAG adapter. Part numbers are:   MCB1760: MCB1760 Only MCB1760UME: MCB1760 and ULINK-ME Evaluation Software The MCB1760 Evaluation Board and Starter Kit include the MDK-ARM Evaluation Tools. These tools help you get started writing programs and testing the microcontroller and its capabilities. Sample applications that run on the MCB1760 are included.