VXM9-9009-52M0000000 数据手册
VXM9
2.0 x 1.6mm Crystal
Helping Customers Innovate, Improve & Grow
Table 1. Electrical Performance
Parameter
Nominal Frequency
Symbol
Min.
Typ
FNOM
16.000
Mode
Units
60.000
MHz
Fundamental, AT - Cut
Operating Temperature Range
Stability Over TOP
TOP
1
0/70, -10/70, -20/70, -40/85
FSTAB
Frequency Tolerance2
FTOL
Load Capacitance
CL
Shunt Capacitance
Co
Drive Level
Max
VT-804
±10
±10
6
10
Aging / 1st year (at 25 °C)
FAGE
°C
±100
ppm
±20
ppm
32
pF
5
pF
100
uW
±5
ppm
500
Description
Insulation Resistance
Storage Temperature
TSTO
-40
MOhm
90
°C
Equivalent Series Resistance
Crystal Frequency
16.000MHz-20.000MHz
20.001MHz-30.000MHz
Features
30.001MHz-60.000MHz
ESR
Ohm
200
100
Applications
80
Notes:
1. Referenced to the Frequency at 25 °C.
2. Frequency measured at 25 °C ± 3 °C.
Product is compliant to RoHS directive and fully compatible with lead free assembly.
Package Drawing
XX.X
YMC
Part Marking:
XX.X = Frequency
Y = Year
M = Month
A = January
B = February
C = March
D = April
E = May
F = June
G = July
H = August
I = September
J = October
K = November
L = December
C = Manufacuting Location
Block Diagram
Table 2. Pinout
All Dimensions in mm
Page1
Pin
Function
1
Crystal
2
Connected to cover
(Connect to GND
3
Crystal
4
Connected to cover
(Connect to GND)
Table 3. Environmental Compliance
Parameter
Conditions
Mechanical Shock
MIL-STD-883, Method 2002, Condition B
Mechanical Vibration
MIL-STD-883, Method 2007, Condition A
Temperature Cycle
MIL-STD-883, Method 1010, Condition B
Solderability
MIL-STD-202-210, Condition B
Gross and Fine Leak
MIL-STD-883, Method 1014
Altitude
MIL-STD-883, Method 1001, Condition B
Moisture Sensitivity Level
MSL 1
Contact Pads
Gold (0.2 um min) over Nickel
Weight
7 mg
Reliability & IR Compliance
Table 4: Reflow Profile
Parameter
Symbol
Value
PreHeat Time
Ts-min
Ts-max
tS
60 sec Min, 260 sec Max
150°C
200°C
Ramp Up
RUP
3 °C/sec Max
Time Above 217 °C
tL
60 sec Min, 150 sec Max
Time To Peak Temperature
TAMB-P
480 sec Max
Time at 260 °C
tP
30 sec Max
Ramp Down
RDN
6 °C/sec Max
Pads are Au over Ni and compatible with either SnPb or Pb free attachment.
MSL: 1
Page2
Tape & Reel
Table 5. Tape and Reel Dimensions (mm)
Tape
Reel
A
B
C
D
E
F
G
H
J
K
L
M
A
B
C
D
E
W
T
2.25
1.85
8.0
3.5
1.75
4.0
4.0
2.0
0.5
1.55
0.25
0.65
180
60
21.0
13.0
2.0
9.0
2.0
Ordering Information
VXM9 - XXX - XX- xxMxxxxxxxXX
Product
2.0 x 1.6mm, Crystal
Packaging
TR:
Tape and Reel
blank: Cut Tape / non Tape and Reel quantities
_SNPB: Tin lead solder dipped
Mode
1: Fundamental
Frequency in MHz
Temp Stability
C: ±10ppm
D: ±15ppm
E: ±20ppm
F: ±25ppm
G: ±30ppm
H: ±35ppm
I: ±40ppm
J: ±45ppm
K: ±50ppm
S: ±100ppm
Load Capacitance
0: Series Resonance
06-32pF
*Note: not all combination of options are available.
Other specifications may be available upon request.
Example:
VXM9-1EE-12-25M0000000TR
VXM9-1EE-12-25M0000000
VXM9-1EE-12-25M0000000_SNPB
Operating Temperature
E: -40 to 85 °C
J:
-20 to 70 °C
W: -10 to 70 °C
T:
0 to 70 °C
Tape and Reel
Cut Tape
Tin lead solder dipped
Page3
Revision History
Revision Date
Approved
August 29, 2016
RC
Initial datasheet for factory approval and release to customer.
Description
August 10, 2018
FB
Update logo and contact information, add “SNPBDIP” ordering option
June 07, 2019
FB
Update logo and contact information, add Table 2 Environmental compliance,
change “SNPBDIP” to “SNPB”
For Additional
Information,
Please Contact
FB
Add tape
and reel ordering option
April 30, 2020
Previous Ordering Information for Reference Only
Do Not Use to Build a New Part Number
VXM9-1G2-10M000
Package
VXM9 : 2.0x1.6x0.55
Frequency
Mode
1 : Fundamental
Load Capacitance
0: Series Resonator
1: 16 pf
2: 20 pf
3: 32 pf
4: 18 pf
5: 10 pF
6: 30 pf
Stability
A: ±100 ppm over -20o to 70oC
B: ±50 ppm over -20o to 70oC
C: ±100 ppm over -40o to 85oC
D: ±50 ppm over -40o to 85oC
F: ±30 ppm over -20o to 70oC
A: ±10 ppm over -10o to 60oC
A: ±15 ppm over -30o to 85oC
The ordering codes for the VXM9 were changed in 2016. If you had ordered a specific code based off this ordering method, it is still
available for purchase under the old code however no new part numbers will be created using this system.
Due to the change in the 8th character from numeric to alphabetic, there is no opportunity for overlap between the two ordering
methods.
Contact Information
USA:
100 Watts Street
Mt Holly Springs, PA 17065
Tel: 1.717.486.3411
Fax: 1.717.486.5920
Europe:
For Additional Information,
Please Contact
Landstrasse
74924 Neckarbischofsheim
Germany
Tel: +49 (0) 7268.801.0
Fax: +49 (0) 7268.801.281
Information contained in this publication regarding device applications and the like is provided only for your convenience and
may be superseded by updates. It is your reasonability to ensure that your application meets with your specifications. MICROCHIP
MAKES NO REPRESENTATION OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION INCLUDING, BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use.
Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend,
indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses
are conveyed, implicitly, or otherwise, under any Microchip intellectual property rights unless otherwise stated.
Trademarks
The Microchip and Vectron names and logos are registered trademarks of Microchip Technology Incorporated in the U.S.A. and
other countries.
Page4
VXM9-9009-52M0000000 价格&库存
很抱歉,暂时无法提供与“VXM9-9009-52M0000000”相匹配的价格&库存,您可以联系我们找货
免费人工找货