MTN3K14N3

CYStech Electronics Corp. 30V N-CHANNEL Enhancement Mode MOSFET Spec. No. : C427N3 Issued Date : 2008.05.16 Revised Date : Page No. : 1/7 MTN3K14N3 Features • VDS=30V RDS(ON)=39mΩ@VGS=10V, ID=2A RDS(ON)=57mΩ@VGS=4.5V, ID=2A • Low on-resistance • High speed : ton=24ns(typ.), toff=19ns(typ.) • Pb-free package Equivalent Circuit MTN3K14N3 Outline SOT-23 D G：Gate S：Source D：Drain S G Absolute Maximum Ratings (Ta=25°C) Parameter Drain-Source Voltage Gate-Source Voltage Continuous Drain Current Pulsed Drain Current Maximum Power Dissipation Linear Derating Factor Thermal Resistance, Junction to Ambient Operating Junction and Storage Temperature Symbol VDS VGS ID IDM PD Rth, j-a Tj, Tstg Limits 30 ±20 4 (Note 1) 8 (Note 2 & 3) 1.38 0.01 90 (Note 1) -55 ~ +150 Unit V V A A W W/°C °C/W °C Note : 1. Surface mounted on 1 in² copper pad of FR4 board; 270°C/W when mounted on min. copper pad 2. Pulse width limited by maximum junction temperature 3. Pulse width≤300μs, duty cycle≤2% MTN3K14N3 CYStek Product Specification CYStech Electronics Corp. Spec. No. : C427N3 Issued Date : 2008.05.16 Revised Date : Page No. : 2/7 Electrical Characteristics (Tj=25°C, unless otherwise specified) Symbol Static BVDSS VGS(th) IGSS IDSS *RDS(ON) *GFS Dynamic Ciss Coss Crss *td(ON) *tr *td(OFF) *tf *Qg Source-Drain Diode *VSD Min. 30 1.0 Typ. 6.4 460 62 106 24 15 19 6 5.0 Max. 2.5 ±100 1 10 39 57 67 1.2 Unit V V nA μA μA mΩ S Test Conditions VGS=0, ID=250μA VDS=VGS, ID=250μA VGS=±20V, VDS=0 VDS=30V, VGS=0 VDS=24V, VGS=0, Tj=55°C ID=2A, VGS=10V ID=2A, VGS=4.5V ID=2A, VGS=4.0V VDS=5V, ID=2A pF VDS=15V, VGS=0, f=1MHz VDS=15V, ID=2A, VGS=4V, RG=10Ω VDS=24V, ID=4A, VGS=4V VGS=0V, IS=1.2A *Pulse Test : Pulse Width ≤300μs, Duty Cycle≤2% ns nC V Ordering Information Device MTN3K14N3 Package SOT-23 (Pb-free) Shipping 3000 pcs / Tape & Reel Marking 3K14 MTN3K14N3 CYStek Product Specification CYStech Electronics Corp. Characteristic Curves Spec. No. : C427N3 Issued Date : 2008.05.16 Revised Date : Page No. : 3/7 MTN3K14N3 CYStek Product Specification CYStech Electronics Corp. Characteristic Curves(Cont.) Spec. No. : C427N3 Issued Date : 2008.05.16 Revised Date : Page No. : 4/7 MTN3K14N3 CYStek Product Specification CYStech Electronics Corp. Reel Dimension Spec. No. : C427N3 Issued Date : 2008.05.16 Revised Date : Page No. : 5/7 Carrier Tape Dimension MTN3K14N3 CYStek Product Specification CYStech Electronics Corp. Recommended wave soldering condition Product Pb-free devices Peak Temperature 260 +0/-5 °C Spec. No. : C427N3 Issued Date : 2008.05.16 Revised Date : Page No. : 6/7 Soldering Time 5 +1/-1 seconds Recommended temperature profile for IR reflow Note : All temperatures refer to topside of the package, measured on the package body surface. MTN3K14N3 CYStek Product Specification Profile feature Average ramp-up rate (Tsmax to Tp) Preheat −Temperature Min(TS min) −Temperature Max(TS max) −Time(ts min to ts max) Time maintained above: −Temperature (TL) − Time (tL) Peak Temperature(TP) Time within 5°C of actual peak temperature(tp) Ramp down rate Time 25 °C to peak temperature Sn-Pb eutectic Assembly 3°C/second max. 100°C 150°C 60-120 seconds 183°C 60-150 seconds 240 +0/-5 °C 10-30 seconds 6°C/second max. 6 minutes max. Pb-free Assembly 3°C/second max. 150°C 200°C 60-180 seconds 217°C 60-150 seconds 260 +0/-5 °C 20-40 seconds 6°C/second max. 8 minutes max. CYStech Electronics Corp. SOT-23 Dimension Spec. No. : C427N3 Issued Date : 2008.05.16 Revised Date : Page No. : 7/7 A L 3 B 1 2 S Marking: TE 3K14 V G 3-Lead SOT-23 Plastic Surface Mounted Package CYStek Package Code: N3 Style: Pin 1.Gate 2.Source 3.Drain C D K H J *: Typical DIM A B C D G H Inches Min. Max. 0.1102 0.1204 0.0472 0.0630 0.0335 0.0512 0.0118 0.0197 0.0669 0.0910 0.0005 0.0040 Millimeters Min. Max. 2.80 3.04 1.20 1.60 0.89 1.30 0.30 0.50 1.70 2.30 0.013 0.10 DIM J K L S V Inches Min. Max. 0.0034 0.0070 0.0128 0.0266 0.0335 0.0453 0.0830 0.1083 0.0098 0.0256 Millimeters Min. Max. 0.085 0.177 0.32 0.67 0.85 1.15 2.10 2.75 0.25 0.65 Notes: 1.Controlling dimension: millimeters. 2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office. Material: • Lead: 42 Alloy ; solder plating • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek. • CYStek reserves the right to make changes to its products without notice. • CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. MTN3K14N3 CYStek Product Specification