SF20HG-T

SF20AG - SF20JG 2.0A SUPER-FAST GLASS PASSIVATED RECTIFIER Features · · · · · Glass Passivated Die Construction Super-Fast Switching for High Efficiency Surge Overload Rating to 60A Peak Low Reverse Leakage Current Lead Free Finish, RoHS Compliant (Note 4) A B A C D Mechanical Data · · · · · · · · Case: DO-15 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish – Tin. Solderable per MIL-STD-202, Method 208 e3 Polarity: Cathode Band Marking: Type Number Ordering Information: See Page 3 Weight: 0.35 grams (approximate) @ TA = 25°C unless otherwise specified Dim A B C D DO-15 Min 25.40 5.50 0.686 2.60 Max ¾ 7.62 0.889 3.6 All Dimensions in mm Maximum Ratings and Electrical Characteristics Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 5) RMS Reverse Voltage Average Rectified Output Current @ TA = 75°C (Note 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage (Note 5) Reverse Recovery Time (Note 2) Typical Total Capacitance (Note 3) Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 1. 2. 3. 4. 5. Symbol SF20 AG VRRM VRWM VR VR(RMS) IO IFSM VFM IRM trr CT RqJA Tj, TSTG 50 35 SF20 BG 100 70 SF20 CG 150 105 SF20 DG 200 140 SF20 FG 300 210 SF20 GG 400 280 SF20 HG 500 350 SF20 JG 600 420 Unit V V A A 2.0 60 0.95 10 100 35 75 40 -65 to +150 40 50 50 1.3 1.5 @ IF = 2.0A @ TA = 25°C @ TA = 100°C V mA ns pF °C/W °C Valid provided that leads are kept at ambient temperature at a distance of 9.5mm from the case. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 5. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7. Short duration pulse test used to minimize self-heating effect. DS24013 Rev. 3 - 2 1 of 3 www.diodes.com SF20AG - SF20JG ã Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) 2.0 I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) 10 SF20AG - SF20DG SF20FG - SF20GG 1.6 1.0 1.2 0.8 SF20HG - SF20JG 0.1 0.4 Single phase half-wave 60 Hz resistive or inductive load Tj = 25° C 0 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE (° C) Fig. 1 Forward Current Derating Curve IFSM, PEAK FORWARD SURGE CURRENT (A) 60 CT, TOTAL CAPACITANCE (pF) 0.01 0.6 0.8 1.0 1.2 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 100 SF20HG - SF20JG SF20AG - SF20GG 40 10 20 Tj = 25° C f = 1.0MHz 0 1 10 NUMBER OF CYCLES AT 60 Hz Fig. 3 Peak Forward Surge Current 100 1 1 10 VR, DC REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance trr +0.5A 100 Device Under Test (-) Pulse Generator (Note 2) 0A (+) 50V DC Approx -0.25A (-) Oscilloscope (Note 1) (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS24013 Rev. 3 - 2 2 of 3 www.diodes.com SF20AG - SF20JG Ordering Information Device SF20AG-T SF20BG-T SF20CG-T SF20DG-T SF20FG-T SF20GG-T SF20HG-T SF20JG-T Notes: (Note 6) Packaging DO-15 DO-15 DO-15 DO-15 DO-15 DO-15 DO-15 DO-15 Shipping 4K/Tape & Reel, 13-inch 4K/Tape & Reel, 13-inch 4K/Tape & Reel, 13-inch 4K/Tape & Reel, 13-inch 4K/Tape & Reel, 13-inch 4K/Tape & Reel, 13-inch 4K/Tape & Reel, 13-inch 4K/Tape & Reel, 13-inch 6. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS24013 Rev. 3 - 2 3 of 3 www.diodes.com SF20AG - SF20JG