OTS-1RefR-B5-SA-IC

OTS-1Ref Reference Oscillator Link Optiva® SERIES Professional Media Transport SATCOM 1MHz to 20MHz Reference Oscillator Link Optiva® reference oscillator fiber intra-facility links are a high performance, cost-effective alternative to coaxial cable. They provide a secure means of transporting low frequency timing and reference signals allowing all transport signals to be phase locked to a single distributed source. Employing fiber optic links provides much longer transmission distances than copper cables, which simplifies network design, eases installation and even enhances immunity from EMI, RFI and lightning. These transmitters and receivers take the high RF performance and diverse features of Emcore’s Ortel technology and combines them into a compact package compatible with the Optiva® OTCC-16 chassis. The enhanced low frequency performance ideally suits the OTS1Ref optical transport modules for use in applications in conjunction with L-band signal, video, or data signals anywhere between studio and trasmission. The OTS-1Ref is the perfect complement to the wide range of Optiva® Designed for high level signal input 50 Ohm BNC Receiver RF power monitoring via LED, SMA & remote monitoring SNMP monitoring and control High-dynamic-range, optically-isolated DFB lasers run cooler and require less power Fits in Optiva® enclosures, which support Daisy Chain™ video, audio and data links. Hot swap redundant power supplies virtually eliminate downtime 16, 4, 2, & 1 slot enclosures available products. Features 1 to 20 MHz optimized for reference signals 15dB adjustable gain range provides perfect level match for signal distribution System Design Optiva® is a completely modular hot-swappable platform. Both 19” rack mount and compact tabletop or wall-mountable enclosures are available. The 19” rack-mount enclosure (Model OT-CC-16) can support up to 16 insert cards and provides a single power supply (Model PS-200), or a dual-redundant, hot-swappable power supply option. Compact enclosures are available with 1, 2 or 4 slots. The one slot (OT-DTCR-1) and two slot (OT-DTCR-2) enclosures both use an external power supply (PS-9012) and optionally have a standard 2-pin DC power connector for more custom applications. The four-slot 1 RU enclosure (OT-CC-4) uses an integrated power supply. The Optiva® family’s existing wide range of video, audio and data transport products include a unique Daisy-Chain™ feature that multiplexes multiple electrical inputs onto a single fiber, thus resulting in an extremely capable, yet conveniently flexible, signal transport system. Copyright © 2009 Emcore Corporation 626 293 3400 satcom-sales@emcore.com www.emcore.com OTS-1Ref Reference Oscillator Link Optiva® SERIES Professional Media Transport SATCOM Performance Highlights Parameter Link Frequency Range RF link Gain (1dBo optical loss, RX gain at max)1 Fiber Distance Optical Loss Air Temperature TX RF input TX Gain (TG) at 10 MHz RF Flatness (1-20 MHz) Input IP3 (0dBm per tone, 10&11 MHz) Carrier to Noise Ratio, (3dBm RF input, 10 MHz) Spur Free Dynamic Range (1dBo loss) RF return loss Optical Power DC Power RX RX Gain (RG), at 10 MHz1 Gain Flatness (max gain) 1-20 MHz RF Return Loss Output IP3 (10&11 MHz) Output P 1dB @ 10 MHz Optical Input Optimal DC Power 1 Typical Response Min 1 2 0 0 -10 -18 30 130 105 5 22 24 -12 -6 - Typical 12 0 -13 0.5 34 136 > 111 -15 6 12 110 27 0.5 -19 30 15 12 150 Max 20 20 8 50 15 2 -10 7 150 2 -15 10 10 200 Units MHz dB Km dBo ˚C dBm dB (W/A) dB PP dBm dB/Hz dB/Hz²/³ dB dBmo V mA dB (A/W) dB PP dB dBm dBm dBmo dBmo V mA 2 dB per division .03 MHZ 20.0 MHZ OTS-1R (TX & RX) 5.06 in. 128 mm 3 RU 1. Link RF GaindB = TG + RG – 2*FiberLossdBo (assumes Rin = Rout) 2. dBmo & dBo indicate optical power & loss to minimize confusion with RF dBm & dB Ordering Information Product Code OTS-1RefT/B5-1306-SA-IC OTS-1LT/B5-1303-SA-IC OTS-1LT/B7-1303-SA-IC OTS-1LT/S5-1303-SA-IC OTS-1RefR/B5-SA-IC OTS-1LR/B5-SA-IC OTS-1LR/B7-SA-IC OTS-1LR/S5-SA-IC OPV-CTLR-IC OTP-1ETR-A2/A2-LC OT-CC-16-01 PS-200-NA OT-CC-4-1U-NA OT-DTCR-1 / OT-DTCR-2 Specifications Transmitter, 1-20 MHz, BNC 50 ohm, 1310 nm, 6dBm (typ), SC/APC Transmitter, 50-3000 MHz, BNC 50 ohm, 1310 nm, 3dBm (min), SC/APC Transmitter, 50-2500 MHz, BNC 75 ohm, 1310 nm, 3dBm (min), SC/APC Transmitter, 50-3000 MHz, SMA 50 ohm, 1310 nm, 3dBm (min), SC/APC Receiver, 1-20 MHz, BNC 50 ohm, SC/APC Receiver, 50-3000 MHz, BNC 50 ohm, SC/APC Receiver, 50-3000 MHz, BNC 75 ohm, SC/APC Receiver, 50-3000 MHz, SMA 50 ohm, SC/APC NMS SNMP Controller Card & MIB for Optiva Family Optical Tcvr, 1Ch, Ethernet, SM, Dual LC Chassis, 19 in Rack Mount, 16 Slot, 3RU, Rear Access Power Supply, 12 Vdc, 100 to 240 Vac, 50/60 Hz, N. Amer. AC Cord, for OT-CC-16 Chassis w/ built-in Power Supply, 1 RU, 4 slots, 110 - 240Vac, N. Amer. AC , Cord Chassis, flange-mount, w/ Power Supply, 1 slot / 2 slot TX Enclosure Options RX OT-CC-16 OT-CC-4 Information contained herin is deemed to be reliable and accurate as of issue date. Emcore reserves the right to change the design or specifications of the product at any time without notice. EMCORE and the EMCORE logo are trademarks of the EMCORE Corporation. OT-DTCR-2 OT-DTCR-1 Rev: January 28, 2009 008 Copyright © 2009 Emcore Corporation 505 332 5000 626 293 3400 505 332 5100 photovoltaic-sales@emcore.com www.emcore.com www.emcore.com satcom-sales@emcore.com