MBRD10100CT

Schottky Barrier Rectifier MBRD10100CT 2x 5A, 100V, TO-252 Common Cathode MBRD10100CT RoHS Pb Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power Supply, free-wheeling diodes and polarity protection diodes. Features • H  igh junction temperature capability Pin out Heat sink Heat Common Cathode • H  igh frequency operation • G  uard ring for enhanced sinkruggedness and long Common term reliability Cathode • Low forward voltage drop • C  ommon cathode configuration in compact surface mount TO-252 package Applications 1 3 Anode 1 Anode Anode Pinout 1 D2 -PAK & D -PAK Maximum RatingsCommon Cathode • S  witching mode power • DC/DC converters supply 3 2 1 3 • 2Polarity protection diodes Common Anode Common • F  ree-wheeling diodes Anode Anode Cathode Cathode Pinout 2 TO -220AB Common Cathode Pinout 3 Max ITO -220AB Common Cathode 100 Parameters Symbol Test Conditions Peak Inverse Voltage VRWM - Average Forward Current IF(AV) 50% duty cycle @TC = 105°C, rectangular wave form 10 (total device) Peak One Cycle Non-Repetitive Surge Current (per leg) IFSM 8.3ms,half Sine pulse 120 5 (per leg) Heat sink Unit V A A Cathode Electrical Characteristics Common Anode Cathode Parameters 1 2 Cathode 3 Symbol Test Conditions Max Unit VF1 Cathode @ 5A, Pulse, TJ = 25 °C Anode 0.85 Pinout 4 IT O -220AB Reverse Current (per leg) * Common Anode VF2 @ 5A, Pulse, TJ = 125 °C 0.75 @VR = rated VR TJ = 25 °C 1.0 Junction Capacitance (per leg) CT -220 @VR = 5V, TTO = 25 °C,AC G = 1MHz C fSI 300 pF Typical Series Inductance (per leg) LS Measured lead to lead 5 mm from package body 8.0 nH 10,000 V/μs Forward Voltage Drop (per leg) * Voltage Rate of Change IR1 IR2 dv/dt 1 2 Pinout @VR = rated VR TJ =5125 °C 15 V mA * Pulse Width < 300μs, Duty Cycle