411MS8GE

HMC411MS8G / 411MS8GE v02.0607 GaAs MMIC SINGLE-BALANCED MIXER, 10 - 15 GHz Typical Applications The HMC411MS8G / HMC411MS8GE is ideal for: • Long Haul Radio Platforms • Microwave Radio • VSAT Features Conversion Loss: 9 dB LO/RF Isolation: 27 dB LO/IF Isolation: 30 dB Input IP3: +16 dBm No External Components MSOP8G SMT Package 9 MIXERS - SGL-BAL - SMT Functional Diagram General Description The HMC411MS8G & HMC411MS8GE are passive single balanced mixers that operates between 10 GHz and 15 GHz. The HMC411MS8G(E) operate with LO drive levels between +9 dBm and +15 dBm, and provide 9 dB conversion loss across the entire specified frequency band. These mixers require no external components or bias. Electrical Specifi cations, TA = +25° C Parameter Min. Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation RF to IF Isolation IP3 (Input) 1 dB Compression (Input) 20 20 8 11 5 IF = 1.45 GHz LO = +13 dBm Typ. 10.0 - 15.0 DC - 3 9 9 27 30 15 - 20 16 9 12 12 Max. GHz GHz dB dB dB dB dB dBm dBm Units * Unless otherwise noted, all measurements performed as downconverter, IF= 1.45 GHz. 9 - 260 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC411MS8G / 411MS8GE v02.0607 GaAs MMIC SINGLE-BALANCED MIXER, 10 - 15 GHz Conversion Gain vs. Temperature @ LO = +13 dBm 0 Isolation @ LO = +13 dBm 0 CONVERSION GAIN (dB) -10 -5 ISOLATION (dB) -20 -10 -30 -15 +25 C -40 C +85 C 9 RF/IF LO/RF LO/IF -40 -20 9 10 11 12 13 14 15 16 FREQUENCY (GHz) -50 9 10 11 12 13 14 15 16 FREQUENCY (GHz) Conversion Gain vs. LO Drive 0 LO = +7 dBm LO = +9 dBm LO = +11 dBm LO = +13 dBm LO = +15 dBm Return Loss @ LO = +13 dBm 0 -10 RETURN LOSS (dB) -5 -5 -10 -15 -15 RF LO -20 9 10 11 12 13 14 15 16 FREQUENCY (GHz) -20 9 10 11 12 13 14 15 16 FREQUENCY (GHz) IF Bandwidth @ LO = +13 dBm 0 Upconverter Performance Conversion Gain @ LO = +13 dBm 0 CONVERSION GAIN (dB) -5 RESPONSE (dB) IF CONVERSION GAIN IF RETURN LOSS -5 -10 -10 -15 -15 -20 -25 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 FREQUENCY (GHz) -20 9 10 11 12 13 14 15 16 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 261 MIXERS - SGL-BAL - SMT CONVERSION GAIN (dB) HMC411MS8G / 411MS8GE v02.0607 GaAs MMIC SINGLE-BALANCED MIXER, 10 - 15 GHz Input IP3 vs. Temperature @ LO = +13 dBm* 25 Input IP3 vs. LO Drive* 25 20 IP3 (dBm) IP3 (dBm) LO = +11 dBm LO = +13 dBm LO = +15 dBm 20 15 15 9 MIXERS - SGL-BAL - SMT 10 10 +25 C -40 C +85 C 5 10 11 12 13 14 15 FREQUENCY (GHz) 5 10 11 12 13 14 15 FREQUENCY (GHz) Input IP2 vs. LO Drive * 45 LO = +11 dBm LO = +13 dBm LO = +15 dBm Input P1dB vs. Temperature @ LO = +13 dBm 0 CONVERSION GAIN (dB) 40 -5 IP2 (dBm) 35 -10 30 -15 25 +25 C -40 C +85 C 20 10 11 12 13 14 15 FREQUENCY (GHz) -20 9 10 11 12 13 14 15 16 FREQUENCY (GHz) MxN Spurious @ IF Port nLO mRF 0 1 2 3 4 0 XX 7 47 >95 N/A 1 0 0 66 >95 >95 2 5 49 44 >95 >95 3 37 42 56 58 >95 4 N/A 54 57 77 >95 Harmonics of LO nLO Spur @ RF Port LO Freq. (GHz) 9 10.5 12 13.5 15 16.5 1 25 25 27 27 27 24 2 18 20 24 33 47 52 3 46 52 47 61 67 63 4 53 66 63 N/A N/A N/A RF = 14.45 GHz @ -10 dBm LO = 13 GHz @ +13 dBm All values in dBc relative to the IF power level. Measured as downconverter. LO = +13 dBm All values in dBc below input LO level @ RF port. * Two-tone input power = 0 dBm each tone, 1 MHz spacing. 9 - 262 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC411MS8G / 411MS8GE v02.0607 GaAs MMIC SINGLE-BALANCED MIXER, 10 - 15 GHz Absolute Maximum Ratings RF / IF Input LO Drive IF DC Current Storage Temperature Operating Temperature ESD Sensitivity (HBM) +15 dBm +27 dBm ±2 mA -65 to +150 °C -40 to +85 °C Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 9 MIXERS - SGL-BAL - SMT NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Outline Drawing Package Information Part Number HMC411MS8G HMC411MS8GE Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H411 XXXX H411 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 263 HMC411MS8G / 411MS8GE v02.0607 GaAs MMIC SINGLE-BALANCED MIXER, 10 - 15 GHz Pin Descriptions Pin Number 1, 8 Funciton GND Description Pins and exposed ground slug must connect to RF ground. Interface Schematic 9 MIXERS - SGL-BAL - SMT 2 LO This pin is AC coupled and matched to 50 Ohms. 3, 4, 6 N/C Not Connected 5 IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 2 mA of current or die non-function and possible die failure will result. 7 RF This pin is AC coupled and matched to 50 Ohms. 9 - 264 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC411MS8G / 411MS8GE v02.0607 GaAs MMIC SINGLE-BALANCED MIXER, 10 - 15 GHz Evaluation PCB 9 MIXERS - SGL-BAL - SMT List of Materials for Evaluation PCB 103350 [1] Item J1 - J2 J3 U1 PCB [2] Description PCB Mount SMA RF Connector, SRI PCB Mount SMA Connector, Johnson HMC411MS8G / HMC411MS8GE 101650 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 265