30ETH06-1

Bulletin PD-21064 rev. B 11/06 30ETH06SPbF 30ETH06-1PbF Hyperfast Rectifier Features • • • • • • Hyperfastfast Recovery Time Low Forward Voltage Drop Low Leakage Current 125°C Operating Junction Temperature Dual Diode Center Tap Lead-Free ("PbF" suffix) trr = 28ns typ. IF(AV) = 30Amp VR = 600V Description/ Applications State of the art Hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, Hyperfast recover time, and soft recovery. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in PFC Boost stage in the AC-DC section of SMPS, inverters or as freewheeling diodes. The IR extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. Absolute Maximum Ratings Parameters VRRM IF(AV) IFSM TJ TSTG Peak Repetitive Reverse Voltage Average Rectifier Forward Current Non Repetitive Peak Surge Current Operating Junction Temperature Operating Storage Temperature @ TC = 103°C @ TJ = 25°C Max 600 30 200 - 65 to 125 - 65 to 150 Units V A °C Case Styles 30ETH06SPbF 30ETH06-1PbF Base Cathode 2 2 1 3 1 3 N/C Anode N/C Anode D2PAK www.irf.com TO-262 1 30ETH06SPbF, 30ETH06-1PbF Bulletin PD-21064 rev. B 11/06 Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameters VBR, Vr VF Breakdown Voltage, Blocking Voltage Forward Voltage Min Typ Max Units Test Conditions 600 2.0 2.6 V V V μA μA pF nH IR = 100μA IF = 30A, TJ = 25°C IF = 30A, TJ = 150°C VR = VR Rated TJ = 150°C, VR = VR Rated VR = 600V Measured lead to lead 5mm from package body 1.34 1.75 0.3 60 33 8.0 50 500 - IR Reverse Leakage Current - CT LS Junction Capacitance Series Inductance - Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified) Parameters trr Reverse Recovery Time Min Typ Max Units Test Conditions 28 31 77 35 nC A ns IF = 1.0A, diF/dt = 50A/μs, VR = 30V TJ = 25°C TJ = 125°C TJ = 25°C TJ = 125°C TJ = 25°C TJ = 125°C IF = 30A VR = 200V diF /dt = 200A/μs IRRM Peak Recovery Current - 3.5 7.7 65 345 Qrr Reverse Recovery Charge - Thermal - Mechanical Characteristics Parameters TJ TStg RthJC RthJA RthCS Max. Junction Temperature Range Max. Storage Temperature Range Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heatsink Weight Mounting Torque Marking Device Per Leg Per Leg Min - 65 - 65 6.0 5.0 Typ 0.7 0.2 2.0 0.07 - Max 125 150 1.1 70 12 10 Units °C °C/W g (oz) Kg-cm lbf.in 30ETH06S 30ETH06-1 Case style D2Pak Case style TO-262 Typical Socket Mount Mounting Surface, Flat, Smooth and Greased 2 www.irf.com 30ETH06SPbF, 30ETH06-1PbF Bulletin PD-21064 rev. B 11/06 1000 Reverse Current - I R (μA) 1000 100 10 1 0.1 Tj = 175˚C 150˚C 125˚C 100˚C 25˚C Instantaneous Forward Current - I F (A) 0.01 100 0.001 0.0001 0 100 200 300 400 500 600 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage 1000 10 T = 175˚C J T = 150˚C J T = 25˚C J Junction Capacitance - C T (pF) T J = 25˚C 100 1 0 0.5 1 1.5 2 2.5 3 3.5 Forward Voltage Drop - VFM (V) Fig. 1 - Typical Forward Voltage Drop Characteristics 10 0 100 200 300 400 500 600 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 10 Thermal Impedance Z thJC (°C/W) 1 0.1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Single Pulse (Thermal Resistance) Notes: PDM t1 t2 0.01 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.001 0.00001 0.0001 0.001 0.01 0.1 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics 1 10 www.irf.com 3 30ETH06SPbF, 30ETH06-1PbF Bulletin PD-21064 rev. B 11/06 180 Allowable Case Temperature (°C) 90 Average Power Loss ( Watts ) 80 70 60 50 40 30 20 10 0 0 RMS Limit 160 140 120 Square wave (D = 0.50) 100 Rated Vr applied see note (3) DC D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 DC 80 0 5 10 15 20 25 30 35 40 45 Average Forward Current - IF(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current 5 10 15 20 25 30 35 40 45 Average Forward Current - IF(AV) (A) Fig. 6 - Forward Power Loss Characteristics 90 80 70 60 50 40 30 20 IF = 30 A IF = 15 A 1200 V R = 200V T J = 125˚C T J = 25˚C 1000 IF = 30 A IF = 15 A 800 Qrr ( nC ) V R = 200V T J = 125˚C T J = 25˚C trr ( ns ) 600 400 200 10 0 100 di F /dt (A/μs ) Fig. 7 - Typical Reverse Recovery vs. di F /dt 1000 0 100 1000 di F /dt (A/μs ) Fig. 8 - Typical Stored Charge vs. di F /dt (3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR 4 www.irf.com 30ETH06SPbF, 30ETH06-1PbF Bulletin PD-21064 rev. B 11/06 Reverse Recovery Circuit VR = 200V 0.01 Ω L = 70µH D.U.T. diF /dt dif/dt ADJUST D G IRFP250 S Fig. 9- Reverse Recovery Parameter Test Circuit 3 IF 0 trr ta tb 4 Q rr 2 I RRM 0.5 I RRM di(rec)M/dt 0.75 I RRM 5 1 diF /dt f /dt 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr Fig. 10 - Reverse Recovery Waveform and Definitions www.irf.com 5 30ETH06SPbF, 30ETH06-1PbF Bulletin PD-21064 rev. B 11/06 Outline Table Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) Modified JEDEC outline TO-262 Dimensions in millimeters and (inches) 6 www.irf.com 30ETH06SPbF, 30ETH06-1PbF Bulletin PD-21064 rev. B 11/06 Tape & Reel Information Dimensions in millimeters and (inches) Part Marking Information D2PAK THIS IS A 30ETH06S LOT CODE 8024 ASSEMBLED ON WW 02, 2000 INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER 30ETH06S DATE CODE YEAR 0 = 2000 WEEK 02 P = LEAD-FREE TO-262 THIS IS A 30ETH06-1 LOT CODE 8024 ASSEMBLED ON WW 02, 2000 INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER 30ETH06-1 DATE CODE YEAR 0 = 2000 WEEK 02 P = LEAD-FREE www.irf.com 7 30ETH06SPbF, 30ETH06-1PbF Bulletin PD-21064 rev. B 11/06 Ordering Information Table Device Code 30 1 E 2 T 3 H 4 06 5 S 6 TRL PbF 7 8 1 2 3 4 5 6 7 6 8 - Current Rating (30 = 30A) E T H S = Single Diode = TO-220, D2Pak = HyperFast Recovery = D2Pak Voltage Rating (06 = 600V) -1 = TO-262 none = Tube (50 pieces) TRL = Tape & Reel (Left Oriented, for D2PAk package) TRR = Tape & Reel (Right Oriented, for D 2PAk package) - none = Standard Production PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 2 33 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 11/06 8 www.irf.com