30ETH06S

30ETH06S/30ETH06-1 Vishay High Power Products Hyperfast Rectifier, 30 A FRED PtTM FEATURES 30ETH06S 30ETH06-1 • Hyperfast recovery time • Low forward voltage drop • Low leakage current • 125 °C operating junction temperature Base cathode 2 2 • Dual diode center tap • Designed and qualified for industrial level DESCRIPTION/APPLICATIONS 1 N/C 3 Anode 1 N/C 3 Anode D2PAK TO-262 PRODUCT SUMMARY trr (typical) IF(AV) VR 28 ns 30 A 600 V State of the art hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, hyperfast recovery time and soft recovery. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in PFC boost stage in the AC-DC section of SMPS, inverters or as freewheeling diodes. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. ABSOLUTE MAXIMUM RATINGS PARAMETER Peak repetitive reverse voltage Average rectified forward current Non-repetitive peak surge current Operating junction and storage temperatures SYMBOL VRRM IF(AV) IFSM TJ, TStg TC = 103 °C TJ = 25 °C TEST CONDITIONS MAX. 600 30 200 - 65 to 175 UNITS V A °C ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage Forward voltage SYMBOL VBR, VR VF IR CT LS IR = 100 µA IF = 3 0 A IF = 30 A, TJ = 150 °C VR = VR rated TJ = 150 °C, VR = VR rated VR = 600 V Measured lead to lead 5 mm from package body TEST CONDITIONS MIN. 600 TYP. 2.0 1.34 0.3 60 33 8.0 MAX. 2.6 1.75 50 500 µA pF nH V UNITS Reverse leakage current Junction capacitance Series inductance Document Number: 93932 Revision: 08-Sep-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 30ETH06S/30ETH06-1 Vishay High Power Products Hyperfast Rectifier, 30 A FRED PtTM DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS IF = 1.0 A, dIF/dt = 50 A/µs, VR = 30 V Reverse recovery time trr TJ = 25 °C TJ = 125 °C Peak recovery current IRRM Qrr TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C IF = 3 0 A dIF/dt = 200 A/µs VR = 200 V MIN. TYP. 28 31 77 3.5 7.7 65 345 MAX. 35 A ns UNITS Reverse recovery charge nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Thermal resistance, junction to case per leg Thermal resistance, junction to ambient per leg Thermal resistance, case to heatsink Weight Mounting torque Marking device Case style D2PAK Case style TO-262 SYMBOL TJ, TStg RthJC RthJA RthCS Typical socket mount Mounting surface, flat, smooth and greased TEST CONDITIONS MIN. - 65 6.0 (5.0) TYP. 0.7 0.2 2.0 0.07 MAX. 175 1.1 70 12 (10) g oz. kgf · cm (lbf · in) °C/W UNITS °C 30ETH06S 30ETH06-1 www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 93932 Revision: 08-Sep-08 30ETH06S/30ETH06-1 Hyperfast Rectifier, 30 A FRED PtTM IF - Instantaneous Forward Current (A) 1000 1000 Vishay High Power Products IR - Reverse Current (µA) 100 10 1 0.1 TJ = 175 °C TJ = 150 °C TJ = 125 °C TJ = 100 °C 100 10 TJ = 175 °C TJ = 150 °C TJ = 25 °C TJ = 25 °C 0.01 0.001 0.0001 0 100 200 300 400 500 600 1 0 0.5 1 1.5 2 2.5 3 3.5 VF - Forward Voltage Drop (V) Fig. 1 - Typical Forward Voltage Drop Characteristics VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 1000 CT - Junction Capacitance (pF) 100 TJ = 25 °C 10 0 100 200 300 400 500 600 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 ZthJC - Thermal Impedance (°C/W) 1 0.1 0.01 Single pulse (thermal resistance) D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 PDM t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 1 0.001 0.00001 . 10 0.0001 0.001 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 93932 Revision: 08-Sep-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 30ETH06S/30ETH06-1 Vishay High Power Products 180 Hyperfast Rectifier, 30 A FRED PtTM 90 80 IF = 30 A IF = 15 A Allowable Case Temperature (°C) 160 DC 70 60 trr (ns) 140 50 40 30 20 VR = 200 V TJ = 125 °C TJ = 25 °C 1000 120 Square wave (D = 0.50) Rated VR applied 100 See note (1) 80 0 5 10 15 20 25 30 35 40 45 10 0 100 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current dIF/dt (A/µs) Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt 90 80 1200 1000 VR = 200 V TJ = 125 °C TJ = 25 °C Average Power Loss (W) 70 60 50 40 30 20 10 0 0 5 10 15 20 25 DC RMS limit 800 D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 Qrr (nC) 600 400 200 0 100 IF = 30 A IF = 15 A 30 35 40 45 1000 IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics dIF/dt (A/µs) Fig. 8 - Typical Stored Charge vs. dIF/dt (1) Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 93932 Revision: 08-Sep-08 30ETH06S/30ETH06-1 Hyperfast Rectifier, 30 A FRED PtTM VR = 200 V Vishay High Power Products 0.01 Ω L = 70 µH D.U.T. dIF/dt adjust D G IRFP250 S Fig. 9 - Reverse Recovery Parameter Test Circuit (3) IF 0 trr ta tb Qrr (2) (4) IRRM 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under cur ve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions Document Number: 93932 Revision: 08-Sep-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 30ETH06S/30ETH06-1 Vishay High Power Products ORDERING INFORMATION TABLE Hyperfast Rectifier, 30 A FRED PtTM Device code 30 1 E 2 T 3 H 4 06 5 S 6 TRL 7 8 1 2 3 4 5 6 7 - Current rating (30 = 30 A) E = Single diode T = TO-220, D 2PAK H = Hyperfast recovery Voltage rating (06 = 600 V) S = D2PAK -1 = TO-262 None = Tube (50 pieces) TRL = Tape and reel (left oriented, for D 2PAK package) TRR = Tape and reel (right oriented, for D 2PAK package) 8 - None = Standard production PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information http://www.vishay.com/doc?95014 http://www.vishay.com/doc?95008 http://www.vishay.com/doc?95032 www.vishay.com 6 For technical questions, contact: diodes-tech@vishay.com Document Number: 93932 Revision: 08-Sep-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1