CJ3134KDW

JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD SOT-363 Plastic-Encapsulate MOSFETs CJ3134KDW Dual N-Channel MOSFET V(BR)DSS ID RDS(on)MAX   380mΩ@ 4.5V  6 450mΩ@ 2.5V  0.75A  20 V SOT-363 5 4 800mΩ@1.8V   1 2 3 FEATURE  Lead Free Product is Acquired  Surface Mount Package  N-Channel Switch with Low RDS(on)  Operated at Low Logic Level Gate Drive  Equivalent to Two CJ3134K MARKING APPLICATION  Load/Power Switching  Interfacing Switching  Battery Management for Ultra Small Portable Electronics  Logic Level Shift Equivalent Circuit ABSOLUTE MAXIMUM RATINGS (Ta=25℃ unless otherwise noted) Parameter Symbol Value Unit Drain-source voltage VDS 20 V Typical Gate-source voltage VGS ±12 V Continuous drain current (t ≤10s) ID 0.75 A Power dissipation* PD 0.15 W RθJA 833 ℃/W Junction temperature TJ 150 ℃ Storage temperature Tstg -55~ +150 ℃ Thermal resistance from junction to ambient * Repetitive rating : Pulse width limited by junction temperature. www.jscj-elec.com 1 Rev. - 1.0 MOSFET ELECTRICAL CHARACTERISTICS Ta =25 ℃ unless otherwise specified Parameter Symbol Test Condition Min Typ Max Unit STATIC PARAMETERS Drain-source breakdown voltage V (BR) DSS VGS = 0V, ID =250µA Zero gate voltage drain current IDSS VDS =20V,VGS = 0V 1 µA Gate-body leakage current IGSS VGS =±10V, VDS = 0V ±20 µA VGS(th) VDS =VGS, ID =250µA 0.54 1.1 V VGS =4.5V, ID =0.65A 270 380 mΩ VGS =2.5V, ID =0.55A 320 450 mΩ VGS =1.8V, ID =0.45A 390 800 mΩ 1.6 Gate threshold voltage (note 1) Drain-source on-resistance (note 1) RDS(on) Forward tranconductance (note 1) gFS VDS =10V, ID =0.8A Diode forward voltage(note 1) VSD IS=0.15A, VGS = 0V 20 0.35 V S 1.2 V 79 120 pF 13 20 pF 15 pF DYNAMIC PARAMETERS (note 2) Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss 9 td(on) 6.7 ns VDS =16V,VGS =0V,f =1MHz SWITCHING PARAMETERS(note 2) Turn-on delay time Turn-on rise time tr VGS=4.5V,VDS=10V, 4.8 ns td(off) ID=0.5A,RGEN=10Ω 17.3 ns tf 7.4 ns Total Gate Charge Qg 750 pC Gate-Source Charge Qgs 75 pC Gate-Drain Charge Qgd 225 pC Turn-off delay time Turn-off fall time VDS =10V,VGS =4.5V,ID =0.25A Notes : 1. Pulse Test : Pulse width≤300µs, duty cycle≤0.5%. 2. Guaranteed by design, not subject to production testing. www.jscj-elec.com 2 Rev. - 1.0 Typical Characteristics Output Characteristics Transfer Characteristics 5.0 4.5 4.0 VGS=4V,5V Ta=25℃ VDS=3V VGS=3V 3.5 VGS=2.5V 3.0 Pulsed Pulsed (A) ID 3.5 3.0 DRAIN CURRENT DRAIN CURRENT ID (A) 4.0 VGS=2V 2.5 2.0 1.5 Ta=100℃ 2.0 1.5 0.5 0.5 0.0 0.0 Ta=25℃ 1.0 VGS=1.5V 1.0 2.5 0.5 1.0 1.5 2.0 2.5 3.0 3.5 DRAIN TO SOURCE VOLTAGE 4.0 VDS 4.5 0.0 5.0 0 (V) 1 2 GATE TO SOURCE VOLTAGE 3 VGS 4 (V) RDS(ON) —— VGS RDS(ON) —— ID 500 800 Pulsed Ta=25℃ 700 350 (m) 400 VGS=2.5V 300 VGS=4.5V 500 250 200 0.1 ID=0.65A 600 ON-RESISTANCE ON-RESISTANCE RDS(ON) (m) VGS=1.8V RDS(ON) 450 Pulsed Ta=100℃ 400 300 Ta=25℃ 200 0.2 0.3 0.4 0.5 0.6 0.7 DRAIN CURRENT 0.8 ID 0.9 1.0 1.1 100 1.2 1 (A) 2 3 GATE TO SOURCE VOLTAGE 4 VGS 5 (V) Threshold Voltage IS —— VSD 2 0.8 Pulsed 1 VTH 0.1 Ta=100℃ THRESHOLD VOLTAGE SOURCE CURRENT IS (A) (V) 0.7 Ta=25℃ 0.6 ID=250uA 0.5 0.4 0.3 0.01 0.0 0.2 0.4 0.6 0.8 1.0 SOURCE TO DRAIN VOLTAGE www.jscj-elec.com 1.2 1.4 0.2 25 1.6 VSD (V) 50 75 JUNCTION TEMPERATURE 3 100 Tj 125 (℃ ) Rev. - 1.0 6273DFNDJH2XWOLQH'LPHQVLRQV Symbol A A1 A2 b c D E E1 e e1 L L1  Dimensions In Millimeters Min Max 0.900 1.100 0.000 0.100 0.900 1.000 0.150 0.350 0. 0.150 2.000 2.200 1.150 1.350 2.150 2.4 0.650 TYP 1.200 1.400 0.525 REF 0.260 0.460 0° 8° Dimensions In Inches Min Max 0.035 0.043 0.000 0.004 0.035 0.039 0.006 0.014 0.00 0.006 0.079 0.087 0.045 0.053 0.085 0.09 0.026 TYP 0.047 0.055 0.021 REF 0.010 0.018 0° 8° 627 6XJJHVWHG3DG/D\RXW  NOTICE JSCJ reserves the right to make modifications,enhancements,improvements,corrections or other changes without further notice to any product herein. JSCJ does not assume any liability arising out of the application or use of any product described herein. www.jscj-elec.com 4 Rev. - 1.0 6277DSHDQG5HHO SOT-363 Embossed Carrier Tape P0 C d P1 Packaging Description: SOT-363 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 3,000 units per 7" or 17.8cm diameter reel. The reels are clear in color and is made of polystyrene plastic (anti-static coated). B F W E A P A A A-A Dimensions are in millimeter Pkg type A B C d E F P0 P P1 W SOT-363 2.25 2.55 1.20 Ø1.50 1.75 3.50 4.00 4.00 2.00 8.00 SOT-363 Tape Leader and Trailer Leader Tape Trailer Tape 50±2 Empty Pockets 100±2 Empty Pockets Components SOT-363 Reel D I G W2 3000 H 2500 2000 1500 1000 D2 D1 500 W1 Dimensions are in millimeter Reel Option D D1 D2 G H I W1 W2 7''Dia Ø178.00 54.40 13.00 R78.00 R25.60 R6.50 9.50 12.30 G.W.(kg) REEL Reel Size Box Box Size(mm) Carton Carton Size(mm) 3000 pcs 7 inch 30,000 pcs 203×203×195 120,000 pcs 438×438×220 www.jscj-elec.com 5 Rev. - 1.0