087501.5MXEP

Axial Lead & Cartridge Fuses 3.6 X 10 mm > Slo-Blo® > 875 Series 875 Series Fuse, Lead-free 3.6 x 10 mm, Slo-Blo® Fuse Description Features Agency Agency File Number Ampere Range E10480 0.100A - 10 A Applications Electrical Characteristics % of Ampere Rating 100% 200% Opening Time 4 hours, Minimum 60 seconds, Maximum Electrical Characteristics Amp Code .100 .125 .200 .250 .300 .400 .500 .600 .800 001. 01.5 01.6 002. 02.5 003. 004. 005. 006. 007 . 008. 010. Ampere Rating (A) 0.100 0.125 0.200 0.250 0.300 0.400 0.500 0.600 0.800 1.00 1.50 1.60 2.00 2.50 3.00 4.00 5.00 6.00 7 .00 8.00 10.00 Voltage Rating (V) 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 Interrupting Rating Nominal Cold Resistance (Ohms) 2.900 1.850 0.920 0.6575 0.435 0.321 0.256 0.151 0.116 0.095 0.0519 0.0476 0.02887 0.02246 0.0171 0.0135 0.00954 0.00891 0.008 0.0077 0.00675 Nominal Melting I2t (A2 sec) 0.0054 0.0072 0.0165 0.038 0.043 0.136 0.288 0.611 0.919 1.503 4.33 5.08 8.45 17 .85 24.50 42.45 60.90 72.30 106.80 134.59 208.00 Agency Approvals x x x x x x x x x x x x x x x x x x x x x © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/875.html for current information. 235 Revised: February 3, 2009 875 Series 875 Series Introduction to & Cartridge Fuses Axial Lead Circuit Protection ® 3.6 X 10 mm > Slo-BloTransientology > 875 Series Temperature Rerating Curve Average Time Current Curves .500A .600A .125A .200A .100A .250A .300A .400A .800A 1A 1.5A 1.6A 2A 2.5A 3A 4A 5A 1000 100 10 TIME IN SECONDS 1 0.1 0.01 0.001 0 .1 1 10 CURRENT IN AMPS 100 100 0 Soldering Parameters - Wave Soldering 300 Temperature (°C) - Measured on bottom side of board 280 260 240 220 200 180 160 140 120 100 80 60 40 20 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 10 20 30 40 50 60 70 80 90 0 0 Recommended Process Parameters: Wave Parameter Preheat: 100° 150° 60-180 seconds Solder Pot Temperature: Solder Dwell Time: 260° 2-5 seconds Lead-Free Recommendation Time (Seconds) Preheat Time Dwell Time Cooling Time Recommended Hand-Solder Parameters: Note: These devices are not recommended for IR or Convection Reflow process. 6A 7A 8A 10A 875 Series 236 Revised: February 3, 2009 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/875.html for current information. Axial Lead & Cartridge Fuses 3.6 X 10 mm > Slo-Blo® > 875 Series Product Characteristics Materials Terminal Strength Solderability Product Marketing Packaging 2003-01 Annex A Operating Temperature Thermal Shock Vibration Humidty Salt Spray Dimensions Part Numbering System 0875 xxxx M X E P Series Amp Code Refer to Amp Code column of Electrical Characteristics Table Quantity Code M = 1000 Packaging Code X = Filler Option Code E = Axial Leaded Lead-free P = Lead-Free Others = Special Options Please call Littelfuse for detail All dimensions in mm Packaging Packaging Option 875 Series 1000 1000 MXE Packaging Specification Quantity Quantity & Packaging Code Taping Width © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/875.html for current information. 237 Revised: February 3, 2009 875 Series 875 Series