MSRD620CT,
NRVSRD620VCT,
SSRD8620CT Series
Switch-mode
Soft Ultrafast Recovery
Reverse Polarity Power
Rectifier
www.onsemi.com
State−of−the−art geometry features epitaxial construction with
glass passivation. Ideally suited for low voltage, high frequency
switching power supplies, free wheeling diode and polarity
protection diodes.
SOFT ULTRAFAST
REVERSE POLARITY
RECTIFIER
6.0 AMPERES, 200 VOLTS
Features
• Soft Ultrafast Recovery
• Matched Dual Die Construction − May Be Paralleled for High
•
•
•
•
Current Output
Short Heat Sink Tab Manufactured − Not Sheared
Epoxy Meets UL 94 V−0 @ 0.125 in.
NRVSRD and SSRD8 Prefixes for Automotive and Other
Applications Requiring Unique Site and Control Change
Requirements; AEC−Q101 Qualified and PPAP Capable
These Devices are Pb−Free and are RoHS Compliant*
DPAK
CASE 369C
1
4
3
MARKING DIAGRAM
AYWW
S
620RG
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 0.4 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
•
260°C Max. for 10 Seconds
ESD Ratings:
♦ Machine Model = C
♦ Human Body Model = 2
A
Y
WW
G
= Assembly Location
= Year
= Work Week
= Pb−Free Package
ORDERING INFORMATION
Package
Shipping†
MSRD620CTRG
DPAK
(Pb−Free)
75 Units/Rail
SSRD8620CTRG
DPAK
(Pb−Free)
75 Units/Rail
MSRD620CTT4RG
DPAK
(Pb−Free)
2,500 /
Tape & Reel
NRVSRD620VCTT4RG
DPAK
(Pb−Free)
2,500 /
Tape & Reel
SSRD8620CTT4RG
DPAK
(Pb−Free)
2,500 /
Tape & Reel
Device
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2016
October, 2016 − Rev. 4
1
Publication Order Number:
MSRD620CTR/D
MSRD620CT, NRVSRD620VCT, SSRD8620CT Series
MAXIMUM RATINGS
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Symbol
Value
Unit
VRRM
VRWM
VR
200
V
Average Rectified Forward Current
(At Rated VR, TC = 162°C)
Per Leg
Per Package
IO
A
3.0
6.0
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions, Halfwave, Single Phase, 60 Hz)
Per Package
Storage/Operating Case Temperature
IFSM
A
45
Tstg, Tc
−65 to +175
°C
TJ
−65 to +175
°C
Operating Junction Temperature
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS
Rating
Symbol
Thermal Resistance − Junction−to−Case (Note 1)
Per Leg
RqJC
Thermal Resistance − Junction−to−Ambient (Note 1)
Per Leg
RqJA
Thermal Resistance − Junction−to−Ambient (Note 2)
Per Leg
RqJA
Value
Unit
°C/W
5.0
°C/W
60
°C/W
166
1. Mounted with 700 mm2 copper pad size (approximately 1 in2) 1 oz FR4 board.
2. Mounted with pad size approximately 46 mm2 copper, 1 oz FR4 board.
ELECTRICAL CHARACTERISTICS
Rating
Symbol
Maximum Instantaneous Forward Voltage (Note 3)
Per Leg
(IF = 3.0 A)
(IF = 6.0 A)
VF
Maximum Instantaneous Reverse Current (Note 3)
Per Leg
(VR = 200 V)
IR
Maximum Reverse Recovery Time (Note 4)
Per Leg
(VR = 30 V, IF = 1.0 A, di/dt = 50 A/ms)
trr
Value
Unit
TJ = 25°C
TJ = 125°C
1.15
1.30
0.95
1.15
TJ = 25°C
TJ = 125°C
1.0
200
V
mA
ns
75
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
3. Pulse Test: Pulse Width ≤ 380 ms, Duty Cycle ≤ 2%.
4. trr measured projecting from 25% of IRM to ground.
www.onsemi.com
2
MSRD620CT, NRVSRD620VCT, SSRD8620CT Series
IF, INSTANTANEOUS FORWARD CURRENT (AMPS)
IF, INSTANTANEOUS FORWARD CURRENT (AMPS)
TYPICAL CHARACTERISTICS
100
10
TJ = 150°C
125°C
1.0
25°C
-55°C
0.1
0
1.0
0.5
1.5
2.0
2.5
3.0
125°C
1.0
25°C
-55°C
0.1
0
1.0
0.5
1.5
2.0
2.5
3.0
Figure 1. Typical Forward Voltage, Per Leg
Figure 2. Maximum Forward Voltage, Per Leg
1E-03
IR , MAXIMUM REVERSE CURRENT (AMPS)
IR , REVERSE CURRENT (AMPS)
TJ = 150°C
VF, MAXIMUM INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
TJ = 150°C
1E-05
125°C
1E-06
1E-07
25°C
1E-08
1E-09
-55°C
1E-10
0
20
40
60
80
100
120
140
160
TJ = 150°C
1E-04
125°C
1E-05
1E-06
25°C
1E-07
-55°C
1E-08
180 200
0
20
40
60
80
100
120
140
160
180 200
VR, REVERSE VOLTAGE (VOLTS)
VR, REVERSE VOLTAGE (VOLTS)
Figure 3. Typical Reverse Current, Per Leg
Figure 4. Maximum Reverse Current, Per Leg
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
100
TJ = 25°C
C, CAPACITANCE (pF)
10
VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
1E-04
10
1.0
0
100
40
80
120
160
10
RATED VOLTAGE APPLIED
RqJC = 5°C/W
9
8
7
6
dc
5
4
3
SQUARE WAVE
2
1
0
80
200
90
100
110
120
130
140
150
160
170
180
TC, CASE TEMPERATURE (°C)
VR, REVERSE VOLTAGE (VOLTS)
Figure 6. Typical Current Derating, Case (Per Leg)
Figure 5. Typical Capacitance
www.onsemi.com
3
MSRD620CT, NRVSRD620VCT, SSRD8620CT Series
TYPICAL CHARACTERISTICS
1000
R(t) (°C/W)
100
Duty Cycle = 50%
20%
10 10%
5%
2%
1 1%
0.1
Single Pulse
0.01
0.000001
0.00001
0.0001
0.001
0.01
0.1
PULSE TIME (sec)
1
10
100
1000
100
1000
Figure 7. Thermal Response, Junction−to−Ambient (46 mm2 pad)
100
R(t) (°C/W)
Duty Cycle = 50%
10
20%
10%
5%
1
2%
1%
0.1
Single Pulse
0.01
0.000001
0.00001
0.0001
0.001
0.01
0.1
PULSE TIME (sec)
1
Figure 8. Thermal Response, Junction−to−Ambient (1 in2 pad)
www.onsemi.com
4
10
MSRD620CT, NRVSRD620VCT, SSRD8620CT Series
PACKAGE DIMENSIONS
DPAK (SINGLE GAUGE)
CASE 369C
ISSUE F
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS, OR BURRS. MOLD
FLASH, PROTRUSIONS, OR GATE BURRS SHALL
NOT EXCEED 0.006 INCHES PER SIDE.
5. DIMENSIONS D AND E ARE DETERMINED AT THE
OUTERMOST EXTREMES OF THE PLASTIC BODY.
6. DATUMS A AND B ARE DETERMINED AT DATUM
PLANE H.
7. OPTIONAL MOLD FEATURE.
A
E
C
A
b3
B
c2
4
L3
Z
D
1
2
H
DETAIL A
3
L4
NOTE 7
b2
e
c
SIDE VIEW
b
TOP VIEW
0.005 (0.13)
M
C
Z
H
L2
GAUGE
PLANE
C
L
L1
DETAIL A
DIM
A
A1
b
b2
b3
c
c2
D
E
e
H
L
L1
L2
L3
L4
Z
BOTTOM VIEW
Z
SEATING
PLANE
BOTTOM VIEW
A1
ALTERNATE
CONSTRUCTIONS
ROTATED 905 CW
INCHES
MIN
MAX
0.086 0.094
0.000 0.005
0.025 0.035
0.028 0.045
0.180 0.215
0.018 0.024
0.018 0.024
0.235 0.245
0.250 0.265
0.090 BSC
0.370 0.410
0.055 0.070
0.114 REF
0.020 BSC
0.035 0.050
−−− 0.040
0.155
−−−
MILLIMETERS
MIN
MAX
2.18
2.38
0.00
0.13
0.63
0.89
0.72
1.14
4.57
5.46
0.46
0.61
0.46
0.61
5.97
6.22
6.35
6.73
2.29 BSC
9.40 10.41
1.40
1.78
2.90 REF
0.51 BSC
0.89
1.27
−−−
1.01
3.93
−−−
SOLDERING FOOTPRINT*
6.20
0.244
2.58
0.102
5.80
0.228
3.00
0.118
1.60
0.063
6.17
0.243
SCALE 3:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
◊
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MSRD620CTR/D