PNA4U31F

This product complies with the RoHS Directive (EU 2002/95/EC). Photo IC PNA4U31F (Tentative) Photodiode with amplifier functions For optical control systems  Features  Small package, × 52 speed  Reflow soldering possible  Absolute Maximum Ratings Ta = 25°C Parameter Operating supply voltage Power dissipation Operating ambient temperature Storage temperature Symbol VCC PD Topr Tstg Rating 6 250 –20 to +70 –40 to +85 Unit V mW °C °C  Operatong Condition Parameter Operating supply voltage Reference voltage 　 Symbol VCC VREF VCC = 5.0 V Conditions Min 4.5 1.60 Typ 5.0 1.70 Max 5.5 1.80 Unit V V  Electrical Characteristics Ta = 25°C±3°C, VCC = 5.0 V, RL = 10 kW, CL = 20 pF, VR = 300 W Parameter SW change voltage range Output offset voltage Symbol VSW2 VSW1 VOFF CD Conditions Gain1 / Gain2 → Gain1 DVD Gain1 / Gain2 → Gain2 [VOP - VON] No signal condition Min 2.4 0 -20 -3 -25 1.9 1.68 3.6  65 75     Typ   0 -5  2.1 2.24 4.8 26.0 75 85 7 6 7 6 Max VCC 0.99 20 0 25  2.8 6.0 29.9   (9.5) (8.5) (9.5) (8.5) Unit V V mV mV/V mV/°C V V/mW V/mW mA MHz MHz ns ns ns ns Drift of output offset voltage dVOFF / VCC [VOP - VON], VCC = 5.0 V ± 0.5 V by operating supply voltage *4 Drift of output offset voltage by temperature *4 Maximum output voltage *3 Output sensitivity *1, 2 Supply current Cutoff frequency *4 dVOFF / Ta [VOP - VON], Ta = 20°C to 70°C VOM Gain1 Gain2 ICC fC(-3dB) [VOP - VON] Max. Reference to GND [VOP - VON] λ = 780 nm [VOP - VON] λ = 650 nm No signal condition CD DVD CD CD Gain1 20 log (VO (fC MHz) / VO (1 MHz)) = -3 Gain2 20 log (VO (fC MHz) / VO (1 MHz)) = -3 VOP - VON = 2 V[p-p], 10% to 90%, Gain1 VOP - VON = 2 V[p-p], 10% to 90%, Gain1 Rise time *4, 5 Fall time *4, 5 tr tf DVD VOP - VON = 2 V[p-p], 10% to 90%, Gain2 DVD VOP - VON = 2 V[p-p], 10% to 90%, Gain2 Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes. 2. *1: Standard voltage level; VREF (Exclude output offset voltage) *2: Limitation to the difference of sensitivity will be defined individually after confirmation, when it is necessary. *3: Full saturation value *4: Guarantee item on design. *5: The numerical in parenthesis is design reference value. Publication date : February 2009 SHE00075AED 1 This product complies with the RoHS Directive (EU 2002/95/EC). PNA4U31F  Electrical Characteristics (Continued) Ta = 25°C±3°C, VCC = 5.0 V, RL = 10 kW, CL = 20 pF, VR = 300 W Parameter Slew rate *4 Settling time *4, 5 Mode selecting time Symbol SR tset tsel CD CD Conditions VOP - VON = 2 V[p-p] at Gain1 VOP - VON = 2 V[p-p] at Gain1, ±3% DVD VOP - VON = 2 V[p-p] at Gain2 DVD VOP - VON = 2 V[p-p] at Gain2, ±3% Gain-high ↔ Sleep ↔ Low Min 200 200    Typ 300 300 12 10 150 Max   (15) (14) 200 Unit V/ms V/ms ns ns ns Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes. 2. *4: Guarantee item on design. *5: The numerical in parenthesis is design reference value.  Electrical Characteristics (Reference values for design) Ta = 25°C±3°C, VCC = 5.0 V, VR = 300 W Parameter Load resistance Load capacitor Symbol RL CL RL = 10 kW Conditions Terminated voltage = 1.70 V Min 1  Typ 10 20 Max  (40) Unit kW pF Note) Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.  Block Diagram 2 DVD 3.9 kΩ CD 2 kΩ VCC 1 1 kΩ Buffer SW 37.5 Ω 8 VOUT+ PD GND 4 I/V Amp. 50 Ω DUMMY VREF Buffer 37.5 Ω 7 VOUT− R GAIN1(CD) 5 6 R GAIN2(DVD) VR2 VR1 3 Amp. IN 2 SHE00075AEK This product complies with the RoHS Directive (EU 2002/95/EC). PNA4U31F  ackage (Unit: mm) P KPTFTN6K0005  in name P 1: VCC 2: SW 3: Amp.IN 4: GND 5: R GAIN1 6: R GAIN2 7: VOUT8: VOUT+ SHE00075AEK 3 Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: – Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. – Any applications other than the standard applications intended. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. 20080805