ISL1572IRZ-T7

DATA SHORT To request the full datasheet, please visit www.intersil.com/products/isl1572 ISL1572 Power Line Communication (PLC) SIGNS D FOR NEW DE DE EN M M CO RE NOT T PART D REPLACEMEN RECOMMENDE ISL1571 FN6536 Rev 2.00 July 2, 2009 The ISL1572 is a dual operational amplifier designed for PLC line driving in OFDM and SSC based solutions. This device features a high drive capability of 750mA while consuming only 6mA of supply current per amplifier and operating from a single 4.5V to 12V supply. The driver achieves a typical distortion of -80dBc, at 150kHz into a 25 load. Features The ISL1572 is available in the thermally-enhanced 16 Ld QFN or 10 Ld HMSOP package and is specified for operation over the full -40°C to +85°C temperature range. The ISL1572 has control pins BIAS0 and BIAS1 for controlling the bias and enable/disable of the outputs. These controls allow for lowering the power to fit the performance/power ratio for the application. • -75dBc typical driver output distortion at 4MHz • 21dBm output power capability • Drives up to 750mA from a +12V supply • 20VP-P differential output drive into 21 • Very low noise floor • -80dBc typical driver output distortion at 10MHz • -79dBc typical driver output distortion at 17MHz • Low quiescent current of 6mA per amplifier • Supply range - For ISL1572IUEZ 4.5V to 12V - For ISL1572IRZ ±2.25V to ±6V, 4.5V to 12V • 250MHz bandwidth • Thermal shutdown • Pb-free (RoHS compliant) Applications • UPA digital home standard Ordering Information PART NUMBER (Note) PART MARKING TEMP. RANGE (°C) PACKAGE (Pb-Free) PKG. DWG. # ISL1572IRZ 157 2IRZ -40 to +85 16 Ld QFN MDP0046 ISL1572IRZ-T7* 157 2IRZ -40 to +85 16 Ld QFN (Tape and Reel) MDP0046 ISL1572IUEZ BBBFA -40 to +85 10 Ld HMSOP MDP0050 ISL1572IUEZ-T7* BBBFA -40 to +85 10 Ld HMSOP (Tape and Reel) MDP0050 *Please refer to TB347 for details on reel specifications. NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. FN6536 Rev 2.00 July 2, 2009 Page 1 of 2 ISL1572 © Copyright Intersil Americas LLC 2008-2009. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. For additional products, see www.intersil.com/en/products.html Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted in the quality certifications found at www.intersil.com/en/support/qualandreliability.html Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com FN6536 Rev 2.00 July 2, 2009 Page 2 of 2